SURPASS HOBBY C28 Series V2 Outrunner Brushless Motor for AirCraft User Manual
- June 12, 2024
- SURPASS HOBBY
Table of Contents
SURPASS HOBBY C28 Series V2 Outrunner Brushless Motor for AirCraft
Thank you!
Thank you for purchasing Surpasshobby product, this is a powerful RC hobby
product rather than a toy. It must be operated with care and common sense of
safety. Any wrong operation may cause personal injury or damage the product.
This product does not allow children to use it without the direct
supervision of an adult. Before installation and use, please read and follow
the operating procedures specified in this manual. We do not assume any
liability arising from the use of this product, including but not limited to
compensation for incidental or indirect loss; at the same time, we do not
assume any liability arising from unauthorized modifications to the product.
WARNINGS
- Before using, Ensure that the power system is reasonable. Unreasonable power matching will cause the motor to be damaged due to overload.
- Do not over tighten the screws when installing the motor. Be sure to use the appropriate mounting screws.
- Before connecting the motor, Ensure that The insulated parts are well treated, Short circuit will destroy the product.
- Be sure to connect the components correctly. Wrongly connected may not work properly, or the components may be damaged or other unpredictable conditions.
- Avoid the motor operating temperature exceeding 100°C (212°F). High temperature may cause the rotor to demagnetize and damage motor.
- Do not touch the motor after use to avoid overheating and scalding. Wait for the motor to cool down completely before using it.
FEATURES
- 14 Pole Hi-torque rotor design, stable output power.
- Fits all fixed wing aircraft model.
- CNC Machined 6061 T6 aluminum front and rear cover.
- Precision balanced rotor, smoothness for best reliability and maximum RPM.
- High Purity Copper Windings Maximizes Efficiency.
- Precision Engineered for Maximum Energy Conversion.
INSTALLATION AND CONNECTION
-
Install the motor
The motor mounting screws are M2.5(C2822)/M3(C2826-C2838) screw holes. -
Motor connection
There is no polarity on the #A/#8/#C three ESC-to-motor wires, so do not worry about how you connect them initially. You may find it necessary to swap two wires if the motor runs in reverse. -
Inspection
Before turning on the power of the remote control, please Ensure double check the correctness of the motor connection and the reliability of the installation.
SPECIFICATIONS
Model
| Item Number| KV (RPM/1/volt)| MAX Watts (WI| Voltage Range(V)| Max Current (Al| Rotor Poles| No load Current(A)| Resistance (0)| Motor Size (mm)| Stator Size (mm)| Weight (g)|
Propeller (Inch)
---|---|---|---|---|---|---|---|---|---|---|---|---
C2822·V 2
| SP-228220-01| 1400| 160| 7~15| 13| 14| 0.4| 0.307| 028×20| 022 x04| 30|
7.5×3.5/8×4/9×5
C2822·V 2| 1200| 140| 7~ 15| 11| 14| 0.3| 0.368| 028×20| 022 x04|
30|
8x 5/8x 6/7 x5
C2822·V 2
| 1300| 150| 7~ 15| 12| 14| 0.4| 0.335| 028×20| 022 x04| 30| 7×5/8×5/8×6
C2822·V 2| 2300| 180| 7~ 15| 18| 14| 0.5| 0.125| 028×20| 022 x04|
30|
6×3/5×3
| | | | | | | | | | | |
C2826-V 2
| SP-228260-01| 1900| 250| 7~12| 27| 14| 1.2| 0.063| 028×24| 022×08| 45| 8 X
3.8/8X 4/7 X 5
C2826-V 2| 1350| 240| 7~12| 24| 14| 0.8| 0.097| 028×24| 022 x08| 45|
8 X 3.8/7X 4
C2826-V 2
| 1200| 230| 7~12| 22| 14| 0.8| 0.135| 028×24| 022 x08| 45| 7×5/8×4/8×5
C2826-V 2| 1000| 220| 7~12| 20| 14| 0.7| 0.256| 028×24| 022 x08| 45|
8×5/8×7/9×4.7
| | | | | | | | | | | |
C28 3 0-V2
| SP-228300-01| 2200| 340| 7~ 12| 28| 14| 1.4| 0.035| 028×28| 022 X 12| 57|
9×6/10 x5/10×6
C28 3 0-V2| 1300| 300| 7~ 12| 25| 14| 1.2| 0.085| 028×28| 022 X
12| 57|
9×6/10×5/10×6
C28 3 0-V2
| 1000| 260| 7~ 15| 21| 14| 0.9| 0.152| 028×28| 022 X 12| 57| 9×4.5/10×6/10×5
C28 3 0-V2| 850| 240| 7~ 15| 19| 14| 0.6| 0.189| 028×28| 022 X
12| 57|
11 x5.S/9×6/10×4
| | | | | | | | | | | |
C28 3 4-V2
| SP-228340·01| 1120| 380| 7~ 15| 26| 14| 1.2| 0.068| 028×32| 022 x16| 67| 9×6/10×4/11 x5.5
C28 3 4-V2
|
880
| 340| 7~ 18| 22| 14| 0.8| 0.108| 028×32| 022×16| 67|
1 1 x8.5/10×7/12×6
C28 3 4-V2
| 750| 300| 7~ 18| 19| 14| 0.6| 0.152| 028×32| 022×16| 67|
11 x8.5/ll x10/12×6
| | | | | | | | | | | |
C2838-V2
| SP-228380-02| 1200| 420| 7~16| 28| 14| 0.9| 0.045| 027.8×34| 022×20| 74.5|
9×6/10×4/10×6
C283 8 ·V2| 1000| 400| 7~18| 25| 14| 0.7| 0.075| 027.8×34|
022×20| 74.5|
11×5.5/11 x8.5/10x 7
C283 8 ·V2
|
800
| 380| 7~18| 23| 14| 0.5| 0.115| 027.8×34| 022×20| 74.5| 10 X 5/11 X 5/1 lx 8.5
C283 8 ·V2
| 600| 360| 7~20| 20| 14| 0.4| 0.162| 027.8×34| 022×20| 74.5|
10 X 7 /11 X 8.5/12 X 5
CUSTOMER SUPPORT
Shenzhen Surpass Tech co./ Ltd
****
https://www.surpass-hobby.com
Documents / Resources
|
SURPASS HOBBY C28 Series V2 Outrunner Brushless Motor for
AirCraft
[pdf] User Manual
C28, C28 Series V2 Outrunner Brushless Motor for AirCraft, C28 Series V2,
Outrunner Brushless Motor for AirCraft, C28 Series V2 Outrunner Brushless
Motor, Outrunner Brushless Motor, Brushless Motor, Motor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>