Amazon Basics G6B Ergonomic Wireless Mouse User Guide
- June 12, 2024
- amazon basics
Table of Contents
Amazon Basics G6B Ergonomic Wireless Mouse
Parts List
Setup
Installing The Battery
NOTE
- ALWAYS purchase the correct size and grade of batte,y most sultable for the intended use.
- Clean the batte,y contacts and also those of the device prior to battery installation.
- Ensure the batteries are installed correctly with regard to polarity(+ and -).
- Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly.
Installing the Battery
- Remove the battery cover.
- Insert the battery correctly with regard to polarity(+ and-) marked on the battery and the product.
- Place the cover back over the battery compartment.
- Set the ON/OFF switch to ON.
Connecting Mouse to Receiver
- Remove the batte,y cover, and take the nano receiver out.
- Plug the nano receiver into a USB port of your computer.
Setup the Connection between the Receiver and the Mouse
- Insert the battery into the mouse, then follow the steps below.
- In the meantime, to take the nano receiver, open the cover under the mouse.
- Plug the Nano receiver into the USB port on your computer.
- If the mouse does not work, please put it into pairing mode.
- Pairing: Re-plug the receiver into the USS port on your computer, then press the connect button on the mouse. If the mouse does not work after 10 seconds, pair them again. (The receiver has auto pairing function).
- The LED indicator on mouse flashes steadily when it is in pairing mode and stops blinking when it is successfully paired with the receiver.
- When low batte,y, the batte,y indicator (DPI key) on the mouse will start to blink.
Operation
Controls
-
Forward
Press this button to v’eN the next page in your Internet browser. -
Backward
Press this button to view the previous page in your Internet browser.
DPI Setting Adjustment
- 5 DPI settings are available.
- The number of times the DPI key blinks indicates the current DP! setting (Note: the default setting is 1600 DPI).
FCC Compliance Statement
- This device complies with Part 15 of the FCC rules. Operation is Stilject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
FCC Interference Statement
This equipment has been tested and found to comply with the limtts for a Class B digttal device, pursuant to part 1 of the FCC Rules. These limtts are designed to provide reasonable protection against 5 hannfu interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance wtth the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be detem1ined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receMng antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Canada IC Notice
- This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
- This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.
- This Class B digital apparatus complies with Canadian CAN ICES-003(B) / NMB-003(8) standard.
Simplified EU Declaration of Conformity
- Hereby, Amazon EU Sari declares that the radio equipment type B078706SGQ,B0787PGF9N,B0787K1MLT,B0787QZ6WD,B0787G1YFF is in compliance with Directive 2014/53/EU.
- The ful text of the EU declaration of conformity is available at the folowilg nternet address: https://www.amazon.co.uk/amazon_private_brand_EU_compliance
Simplified UK Declaration of Conformity
Hereby, Amazon EU SARL, UK Branch declares that the radio equipment type B0787D6SGO, B0787PGF9N, B0787K1MLT, B07870Z6WD, B0787G1YFF is in compliance with The Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following internet address: https://www.arnazon.eo.uk/arnazon_private_brand_EU_compliance
Intended Use
This product is a wireless computer peripheral intended for interacting with your desktop/laptop.
Safety and Compliance
Read this instruction manual carefully before using the product. It contains important information for your safety as well as operating and maintenance advice. Observe all safety instructions to avoid damage through improper use! Follow all warnings on the product. Keep this instruction manual for future use. Should this product be passed on to a third party, then this instruction manual must be included.
- Never use this product if damaged.
- Do not insert any foreign objects into the inside of the casing.
- Protect the product from extreme temperatures, hot surfaces, open flames, direct sunlight, water, high humidity, moisture, strong jolts, flammable gases, vapours and solvents.
- Keep this product and Its packaging out of the reach of children and pets.
CAUTION: Avoid looking directly into the beam.
Battery Warnings
- Keep batteries out of the reach of children. In particular, keep batteries which are considered swallowable out of the reach of children. In case of ingestion of a cell of battery seek medical assistance promptly. Swallowing batteries can cause chemical bums, perforation of soft tissue, and in severe cases can cause death. They need to be removed immediately It swaliowed.
- Do not allow children to replace batteries without adult super.,ision.
- Always insert batteries correctly with regard to polarity (+ and -) marked on the battery and the equipment. When batteries are inserted in reverse they might be short-circuited or charged. This can cause overheating, leakage, venting, rupture, explosion, fire and personal injury.
- Do not short-circuit batteries. When the positive(+) and negative(-) terminals of a batte,y are in electrical contact with each other, the battery becomes short-circuited. For example ioose batteries in a pocket with keys or coins, can be short-circuited. This can result in venting. leakage, explosion, fire and personal injury.
- Do not charge batteries. Attempting to charge a non-rechargeable (primary) battery can cause internal gas and/or heat generation resulting in leakage, venting, explosion, fire and personal injury.
- Do not force discharge batteries. When batteries are force discharged by means of an external power source the voltage of the battery will be forced below its design capability and gases will be generated inside the battery. This can result in leakage, venting, explosion, fire and personal injury.
- Exhausted batteries should be immediately removed from equipment and properly disposed of. When discharged batteries are kept in the equipment for a long time electrolyte leakage can occur causing damage to the equipment and/or personal injury.
- Do not heat batteries. When a batte,y is exposed to heat, leakage, venting, explosion or fire can occur and cause personal injury.
- Do not weld or solder directly to batteries. Toe heat from welding or soldering directly to a battery can cause leakage, venting, explosion or fire, and can cause personal injury.
- Do not dismantle batteries. When a battery is dismantled or taken apart, contact with the components can be harmful and can cause personal injury or fire.
- Do not deform batteries. Batteries should not be crushed, pmctured, or otherwise mutilated. Such abuse can cause leakage, venting, explosion or fire and can cause personal injury.
- Do not dispose of batteries in fire. When batteries are disposed of in fire, the heat build-up can cause explosion and/or fire and personal injury. Do not incinerate batteries except for approved disposal in a controlled incinerator.
- Always select the correct size and grade of battery most su?able for the intended use. Information provided with the equipment to assist correct battery selection should be retained for reference.
- Clean the battery contacts and those of the equprnent prior to battery ilstallation.
- Remove batteries from equipment which is not to be used for an extended period of time.
Cleaning and Maintenance
- Clean the product with a dry lint-free cloth. Do not allow any water or other liquids enter the product’s interior.
- Do not use abrasives, harsh cleaning solutions or hard brushes for cleaning.
- Clean the battery contacts and also those of the product prior to battery installation.
Specifications
Disposal
The Waste Electrical and Bectronic Equipment (WEEE) Directive aims to minimise the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at tts end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers in order to conserve naturai resources . Each country should have tts collection centers for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service.
Battery Disposal
Do not dispose of used batteries with your household waste. Take ? them to an appropriate disposaVcollection site.
Feedback and Help
We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review. Scan QR Code below with your phone camera or QR reader:
US:
UK: amazon.co.uk/review/review-your- purchases#
If you need help with your Amazon Basics product, please use the website or number below.
- US: amazon.com/gp/help/customer/contact-us
- UK: amazon.co.uk/gp/help/customer/contact-us
- +1 STT-485-0385 (US Phone Number)
- amazon.com/AmazonBasics
FREQUENTLY ASKED QUESTIONS
What is the Amazon Basics G6B Ergonomic Wireless Mouse?
The Amazon Basics G6B Ergonomic Wireless Mouse is a computer peripheral designed for comfortable and convenient navigation.
Is the G6B mouse wireless or wired?
The G6B mouse is wireless, meaning it connects to your computer or device via a wireless connection.
What type of wireless connectivity does it use?
The G6B mouse uses Bluetooth for its wireless connectivity.
Does the mouse require any drivers to be installed?
Generally, the mouse should work with basic functionality without additional drivers. However, for advanced features, it's recommended to install any drivers or software provided by Amazon.
Is the Amazon Basics G6B mouse compatible with both Windows and macOS?
Yes, the G6B mouse is designed to be compatible with both Windows and macOS systems.
How many buttons does the mouse have?
The mouse typically has a standard set of buttons, including left-click, right-click, scroll wheel, and additional buttons for navigation.
Is the mouse designed with ergonomics in mind?
Yes, the G6B mouse is designed to be ergonomic, which means it's shaped and crafted for comfortable use over extended periods.
What is the DPI (dots per inch) sensitivity of the mouse?
The DPI sensitivity of the mouse can vary, but it's typically adjustable to various levels to suit different preferences.
Is the G6B mouse ambidextrous or designed for right-handed users?
The G6B mouse is designed for right-handed users.
What is the power source for the wireless mouse?
The G6B mouse is powered by batteries, which are usually included in the package.
How long does the battery last on average?
Battery life can vary based on usage, but the G6B mouse generally has decent battery life, often lasting several weeks or even months on a single set of batteries.
Does the mouse have a sleep mode to conserve battery life?
Yes, the mouse typically has a sleep mode that activates after a period of inactivity to conserve battery power.
Can the mouse's sensitivity (DPI) be adjusted on-the-fly?
Yes, many versions of the G6B mouse allow you to adjust the DPI sensitivity settings on-the-fly for different types of tasks.
Is the mouse designed for gaming as well as regular computer use?
While not specifically marketed as a gaming mouse, the G6B mouse can be used for casual gaming due to its adjustable DPI settings and responsive buttons.
What is the scroll wheel like? Does it offer smooth scrolling?
The mouse typically features a scroll wheel that offers smooth and precise scrolling.
Download the PDF Link:Amazon Basics G6B Ergonomic Wireless Mouse User Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>