ITC 47 Sand Bar Table Leg User Guide
- June 15, 2024
- ITC
Table of Contents
ITC 47 Sand Bar Table Leg
Product Information
- Specifications
- Material: Anodized aluminum construction with fiberglass handle and plastic
- Corrosion Resistance: Yes
- Sizes Available: Standing height (47″) and seated height (31″)
- Leg Diameter: 2.5″
- Included Accessories: Cypress table base, auger base, clip-on floating handle, carry bag
- Additional Required Items: Screws for attaching your own table top (not included)
Product Usage Instructions
- Installation and Setup
- Choose the desired height for your Sand Bar – standing or seated.
- If using your own table top, ensure you have the necessary screws for attachment.
- Attach the Cypress table base to the Sand Bar leg, if desired.
- If using the Sand Bar on a sandy beach or soft ground, insert the auger base into the sand for added stability.
- Place the Sand Bar in the desired location, ensuring it is stable and secure.
- If using a boat table top, remove it from the boat leg and attach it to the Sand Bar leg.
- Removal and Storage
- Remove the table top from the Sand Bar leg.
- Using the handle, unscrew the Sand Bar leg from the sand or ground.
- Rinse any sand or debris out of the leg and drain water from the incorporated drain holes.
- Dry the Sand Bar leg thoroughly.
- Place the Sand Bar leg back into the carry bag for storage and transportation.
- FAQ (Frequently Asked Questions)
- Q: Can I use my own table top with the Sand Bar?
- A: Yes, the Sand Bar comes with a Cypress table base, allowing you to attach your own table top. However, please note that screws for attaching the table top are not included.
- Q: What should I do if the handle of the Sand Bar gets dropped in water?
- A: The handle is designed to float if dropped in water. Simply retrieve it and continue using it as usual. It may show some use marks after rubbing on the aluminum, but this will not affect its function.
The Concept
- The Sand Bar was an idea that came from our team’s experience.
- We love our boat table on the pontoon and when we anchored at the sand bar, we wanted a place to gather around while enjoying the water.
- The idea took off from there.
- Using the Sand Bar leg with our boat table at the sand bar in inland lakes, in the waves of Lake Michigan, or in the surf at the gulf, lead us to bring it up on the beach, and to the campground, then to the backyard corn hole tournament.
Specs:
- The Sand Bar is anodized aluminum construction with fiberglass handle and plastic for corrosion resistance.
- It comes in two sizes designed to work at standing height (47 “) or seated height (31”).
- The leg is the same 2.5” diameter Cypress leg that comes with our boat tables, with an added auger base and clip-on, floating handle all in a handy carry bag.
- It also comes with the Cypress table base if you want to add your own table top.
The Height:
- The height of the leg was designed to allow it to be spun into the sand about 12-14” giving the standing option a final height of 35” – 33” – about the height of a kitchen counter, and the seated option can work with either a lawn chair or a beach chair.
- The generous heights allow you to decide what is best.
To install
- Remove the handle from the clips and insert into the holes near the top.
- Turn the leg into the sand or dirt for about 9 full turns or until it is at the height you desire and it is stable – if it is wavy the leg may need an extra turn, but itwill be stable – check it periodically and tight as needed.
- Align and press your table top firmly on the leg.
- Enjoy!
To remove
- Remove the table top.
- Using the handle unscrew from the sand.
- Rinse the sand out and drain water from the incorporated drain holes.
- Dry and replace in carry bag.
What to Know
- The Sand Bar works great with the ITC boat tables and it is easy to move the table from the boat leg to the Sand Bar.
- It is sold with a Cypress table base in case you want to add you own table top, however screws are not included.
- The handle will float if dropped in the water and it may show some use marks after rubbing on the aluminum.
- This will not affect the function of the handle.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>