The Handy THBCATT Brushcutter Attachment for Multi Tool Instruction Manual

The Handy THBCATT Brushcutter Attachment for Multi Tool

Product Information

• Product Name: Brushcutter Attachment for Multi Tool – THBCATT
• Manufacturer: The Handy
• Spares & Support: 01793 333212
• Website: www.thehandy.co.uk
• Date: 24/07/2013

Safety Instructions

Please read and understand the owner’s manual and labels affixed to the machine before use. It is important to learn the application and limitations of the product, as well as the specific potential hazards. Retain these instructions for future reference.

Parts Diagram and List – Brushcutter (THBCATT)

Assembly Instructions

Brushcutter Attachment:

1. Remove the Blade Nut by turning it clockwise.
2. Remove the Cupped Washer, Clamp Washer, and Flanged Washer.
3. Remove the 3 Blade Guard Screws using the Allen key.
4. Position the Blade Guard over the Blade Guard Screw holes and insert and tighten the screws.
5. Fit the Flanged Washer.
6. Fit the Blade over the raised section of the Flanged Washer.
7. Fit the Clamp Washer.
8. Fit the Cupped Washer.
9. Fit the Blade Nut by turning it anticlockwise to tighten it.
10. Locate the Allen key in the locking hole to stop the shaft from rotating and firmly tighten the Blade Nut with the supplied spanner.

Operation

Operating the Brushcutter:

• Always check for any damage on the blade before use and replace a damaged blade immediately.
• To avoid burns from the hot engine, never operate the unit with the bottom of the engine above waist level or on the operator’s left side.
• Always position the unit on the user’s right side.

Specifications

Cutting Diameter| Shaft| Blade| Blade Diameter| Net Weight (empty tank)| Declared Sound Pressure Level| Declared Sound Power Level| Vibration| Gear Ratio| Max Cutting Speed
---|---|---|---|---|---|---|---|---|---
205mm| Straight| 3 Segment Brush Blade| 205mm| 5.7kg| 96 dB(A)| 106 dB(A)| 8 m/s2| 23:17| 6600 rpm

Guarantee

Please keep your sales receipt as proof of purchase. Your statutory rights remain unaffected.
Guarantor: Handy Distribution SN3 4NS

Additional Products
You can order spare parts and see the complete range of garden machinery and garden equipment from Handy on their website or by contacting their Spares & Support team:

• Website: www.thehandy.co.uk
• Spares & Support: 01793 333212

SAFETY INSTRUCTIONS

Read and understand the owner’s manual and labels affixed to the to the machine. Learn its application and limitations as well as the specific potential hazards. Retain these instructions for future reference.

• Use sturdy footwear and a helmet with eye and ear protection. Protect exposed parts of your body. Wear heavy duty gloves, preferably made of leather.

• Do not wear loose clothing or jewellery. Keep hair, clothing and gloves away from moving parts.

• Do not operate the machine if you are tired, ill or under the influence of alcohol or drugs.

• Do not smoke when using the machine and ensure caution when handling fuel. We recommend you fuel the machine at least 3m away from where you wish to work to prevent spilt fuel igniting when starting the engine.

• Ensure that bystanders, children and pets keep well away when starting or trimming – at least 15m.

• Inspect the machine and all attachments before use for any worn or damaged parts. Do not use until the parts are repaired or replaced.

• Before starting the engine make sure the attachment is not in contact with anything and have a clear work area and secure footing.

• The machine should not be exposed to high temperatures or damp and wet conditions.

• Clean the machine after each use and, if storing for a prolonged period, drain down the fuel in the tank. Remove the spark plug and put a few drops of oil into the cylinder before pulling the starter a 2-3 times to distribute the oil evenly. Replace the spark plug.

• Regularly check that screws, bolts and nuts are correctly fitted.

• Remove tools from the machine before starting, to prevent them being thrown by the machine which may cause injuries to the user or bystanders.

• Do not force the machine. Use the correct machine for the task. The correct machine will do the job better and safer at the rate for which it was designed.

• Do not use this machine if the switch does not turn it on and off. Any machine that cannot be controlled with the switch is dangerous and must be repaired or replaced before use.

• Where possible make use of a shoulder harness when using the machine. Adjust the harness to a comfortable operating position before using the machine. Maintain a firm grip on both handles during use. Keep your body clear of the cutting area of the machine.

• Do not attempt to remove a blockage from a jammed machine before first switching the engine off.

• If you are interrupted when operating the machine, switch off the engine immediately. Do not allow yourself to be distracted while the machine is on. Turn the machine off before talking to any bystanders.

PARTS DIAGRAM AND LIST – BRUSHCUTTER (THBCATT)

A SSEMBLY

Brushcutter Attachment:

1. Remove the Blade Nut, this nut has a left hand thread so should be turned clockwise to undo it.
2. Remove the Cupped Washer, Clamp Washer and Flanged Washer.
3. Remove the 3 Blade Guard Screws with the Allen key.
4. Position the Blade Guard over the Blade Guard Screw holes, insert and tighten the screws.
5. Fit the Flanged Washer.
6. Fit the Blade over the raised section of the Flanged Washer.
7. Fit the Clamp Washer.
8. Fit the Cupped Washer.
9. Fit the Blade Nut, this nut has a left hand thread so should be turned anti-clockwise to tighten it.
10. Locate the Allen key in the locking hole to stop the shaft rotating and firmly tighten the Blade Nut wit  h the spanner supplied.

OPERATION

Operating the Brushcutter:

• Operate the throttle trigger with your right hand and hold the barrier handle with your left hand.
• Always keep a firm grip with both hands during operation.
• The brushcutter should be held at a comfortable position with the trigger handle about hip height. Adjust the harness to suit.
• Maintain a firm footing in case the machine hits a solid object and kicks back.
• Do not use the brushcutter near fencing, posts, buildings or other immoveable objects -use the line trimmer attachment.
• Best results are obtained if you cut from right to left in a broad sweeping action.
• If a hard object is hit, stop the machine and inspect for any damage straight away.
• Never attempt to sharpen the blade. It is reversible so should be turned over when blunt. The blade must remain balanced. Always check for any damage before use and replace a
• damaged blade immediately.

To avoid burns from the hot engine, never operate the unit with the bottom of the engine above waist level or on the operator’s left side. Always position the unit on the user’s right side.

SPECIFICATIONS

ALSO AVAILABLE FROM HANDY THPATT Pruner Attachment

• Easily attachable to your existing power unit, giving you a long reach pruner that is perfect for those out of the way pruning jobs on trees or shrubs.
• Will fit Handy, Mowerland, Ryobi, Flymo, McCulloch and Partner machines.
• On board chain oil container for automatic chain lubrication
• Compatible with Extension Bar
• 255mm bar and chain.
• 180mm cutting capacity.
• 655mm shaft length.

THHCATT-A Hedge Cutter Attachmen

• Fits Handy, McCulloch, Flymo & Ryobi split shaft trimmers
• Articulated through 90° for easier hedge trimming
• 370mm Blade / 24mm Cutting capacity / 655mm Shaft length
• Large blade gap for improved cutting efficiency
• Double reciprocating blade / Easy angle adjustment
• Compatible with Extension Bar
• Weight 2.2kg

THEXT Extension Bar

• Heavy duty steel construction
• Quick and simple attachment
• Weight 0.8kg

HP-166 Chainsaw Chain 3/8 1.3mm (91vg) 40DL
Fits THPATT Handy Pruner Attachment

GUARANTEE

• This product is guaranteed against manufacturing defects for a period of 12 months. This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modifications or alterations. This warranty only covers domestic use and will be void if the tool is used for a commercial application. In the event of a problem with the product within the guarantee period, please contact Customer Service on 01793 333212 or email customerservice@handydistribution.co.uk. If the issue cannot be resolved over the telephone or by email, you may be referred to your local approved service dealer.
• Please keep your sales receipt as proof of purchase
• Your statutory rights remain unaffected. Guarantor: Handy Distribution SN3 4NS
• Whilst every effort is made to accurately represent the product, small variations in colour, design and specification may occur. We reserve the right to alter the product without giving notice.

To order spare parts and see the complete range of garden machinery and garden equipment from Handy, visit:www.thehandy.co.uk

OPERATOR’S MANUAL AND PARTS LIST BRUSHCUTTER ATTACHMENT FOR MULTI TOOL – THBCATT
Spares & Support: 01793 333212
www.thehandy.co.uk
Before use please read & understand this manual, paying particular attention to the safety instructions.

References

• The Handy Garden Machinery

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>