Lapp ÖLFLEX Power Control Cable Instructions
- June 12, 2024
- LAPP
Table of Contents
Lapp ÖLFLEX Power Control Cable
Product Information
- Torsion resistant for drip loops
- Wide application range (NFPA 70/NEC)/ compliance with NFPA 79 for industrial machinery
- EMC/Screened
- Flame-retardant
- Cold-resistant
- Mechanical resistance
- Oil-resistant
- Interference signals
- Torsion-resistant
- UV-resistant
- Many certifications/ use types
- Cost-saving, fast installation omitting protection systems
Product Usage Instructions
This product is suitable for various applications in industrial machinery and plant engineering in the USA. It can be used for unprotected 600V operation on cable trays, including 6 ft. exposed run laying sections for versions with at least 3 conductors. It is compliant with tool machines and wind turbine tray cable (WTTC) for wind turbine generators (WTG).
The product features include flame-retardant properties according to CSA FT4 UL Vertical-Tray Flame Test, oil-resistant properties according to UL OIL RES I & II, resistance to sunlight and ozone, and a high degree of screening with low transfer impedance. It is suitable for torsional applications typical for the loop in wind turbine generators.
The product is made up of a fine-wire strand made of bare copper wires, PVC insulation with nylon sheath (PA skin), aluminum-coated foil, and a specially formulated thermoplastic polymer outer jacket in gray color.
Technical data for the product includes classification under ETIM 5 and ETIM 6 as a control cable, conductor stranding of fine-wire, bare copper strand, torsion movement in WTG referred to in Appendix T0, minimum bending radius of 6 times the outer diameter, and nominal voltage of 600V (UL/CSA) and 1000V (WTTC).
The product is available in various article numbers with different outer diameters, copper index, and weight. The specific article number should be selected based on the requirements of the application.
ÖLFLEX® CONTROL TM CY
ÖLFLEX® Control Cable PVC Screened 0.6/1kV UL TC-ER WTTC AWM600V OIL RES CSA
AWM
ÖLFLEX® CONTROL TM CY: UL MTW TC-ER WTTC AWM 600V OIL RES II WET CSA AWM I/II
A/B FT4, Screened PVC Power Control Cable 0.6/1 kV, Tray Exposed Run, Wind
Turbine
Info
Torsion resistant for drip loops
Wide application range (NFPA 70/NEC)/ compliance with NFPA 79 for industrial
machinery
EMC/Screened
- Flame-retardant
- Cold-resistant
- Mechanical resistance
- Oil-resistant
- Interference signals
- Torsion-resistant
- UV-resistant
Benefits
Many certifications/ use types
Cost-saving, fast installation omitting protection systems
Last Update (08.11.2021)
©2021 Lapp Group – Technical changes reserved
Product Management www.lappkabel.de
You can find the current technical data in the corresponding data sheet. PN
0456 / 02_03.16
ÖLFLEX® CONTROL TM CY
Electromagnetic field screening
75 °C WET Rating + Sunlight Resistant Rating: Outdoor use in the USA
Application range
Industrial machinery, plant engineering in the USA
Unprotected 600V operation on cable tray in the USA, incl. 6 ft. Exposed Run
laying sections for version with at least 3 conductors Compliant with Tool
machines: (UL) MTW
USA Wind Turbine Tray Cable (WTTC) do turbin wiatrowych
Outdoor use and Direct Burial in the USA, per UL 1277
Product features
Flame-retardant according to CSA FT4
UL Vertical-Tray Flame Test
Oil-resistant according to UL OIL RES I & II
Technically resistant to sunlight and ozone
High degree of screening
low transfer impedance
(max. 250 Ω/km at 30 MHz)
Suitable for torsional applications which are typical for the loop in wind
turbine generators (WTG)
Norm references / Approvals
USA: (UL) TC [E171371], -ER > 2 conductors, (UL) MTW [E155920], (UL) WTTC
[E323700], (UL) THHN/THWN (> 1.5 mm²/16 AWG) [E172162], UL AWM Style 20886
[E100338] Sunlight Resistant (Sun. Res.), Direct Burial (Dir. Bur.),
Submersible Pump Cable (> 1.5 mm²/16 AWG, and < 8 conductors), (UL) PLTC (< 6
mm²/10 AWG) [E216027], (UL) ITC (< 6 mm²/10 AWG) [E196134], (UL) DP-1
[E233406] UL OIL RES I/ II, 75°C WET, 90°C DRY, NEC/NFPA 70, NFPA 79
CAN: c(UL) CIC/ TC 600V FT4 [E171371], CSA AWM I/II A/B FT1
Product Make-up
Fine-wire strand made of bare copper wires
Insulation: PVC with nylon sheath (PA skin)
Aluminum-coated foil
Tinned-copper braiding
Outer jacket: Specially formulated thermoplastic polymer
Color of the outer jacket: Gray
Technical Data
-
Classification ETIM 5: ETIM 5.0 Class-ID: EC000104
-
ETIM 5.0 Class-Description: Control cable
-
Classification ETIM 6: ETIM 6.0 Class-ID: EC000104
-
ETIM 6.0 Class-Description : Control cable
Core identification code: Black with white numbers -
Conductor stranding: Fine-wire, bare copper strand
-
Torsion movement in WTG: TW-0 & TW-2, refer to Appendix T0
-
Minimum bending radius: 6 x OD
-
Nominal voltage: UL/CSA: 600 V (TC, MTW, CIC), WTTC 1000 V
-
UL AWM: 600 V
-
CSA AWM: 1000 V
-
IEC: U0/U = 600/1000 V
-
Test voltage: 2000 V
Last Update (08.11.2021) ©2021 Lapp Group – Technical changes reserved
Product Management www.lappkabel.de
You can find the current technical data in the corresponding data sheet.
PN 0456 / 02_03.16
Protective conductor: G = with GN-YE protective conductor X = without
protective conductor
Temperature range: -40°C (static)/ -25°C (occ. moved) to +90°C (TC) or +105°
(AWM)
Note
Unless specified otherwise, the shown product values are nominal values.
Detailed values (e.g. tolerances) are available upon request.
Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the
definition and calculation of copper-related surcharges.
Please find our standard lengths at: www.lappkabel.de/en/cable-
standardlengths
Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum
Please specify the preferred type of packaging (e.g. 1 x 610 m drum or 8 x 76
m coils).
Photographs and graphics are not to scale and do not represent detailed images
of the respective products.
Prices are net prices without VAT and surcharges. Sale to business customers
only.
Last Update (08.11.2021)
©2021 Lapp Group – Technical changes reserved
Product Management www.lappkabel.de
You can find the current technical data in the corresponding data sheet. PN
0456 / 02_03.16
Article number| Number of cores and mm² per conductor| Outer diameter [mm]|
Copper index (kg/km)| Weight (kg/km)
---|---|---|---|---
ÖLFLEX® CONTROL TM CY
281803CY| 3 G 1.0| 8.1| 49.5| 119
281804CY| 4 G 1.0| 8.6| 60.2| 137
281805CY| 5 G 1.0| 9.3| 81.4| 149
281807CY| 7 G 1.0| 10| 101.1| 193
281812CY| 12 G 1.0| 12.8| 161.4| 281
281818CY| 18 G 1.0| 15.5| 228.2| 438
281825CY| 25 G 1.0| 17.5| 326.4| 574
281603CY| 3 G 1.5| 8.8| 65| 144
281604CY| 4 G 1.5| 9.4| 81.9| 173
281605CY| 5 G 1.5| 10.2| 99.1| 189
281607CY| 7 G 1.5| 11.1| 140.4| 246
281612CY| 12 G 1.5| 15| 225.2| 426
281618CY| 18 G 1.5| 17.2| 321.7| 552
281403CY| 3 G 2.5| 9.7| 105.7| 180
281404CY| 4 G 2.5| 10.4| 135.6| 223
281405CY| 5 G 2.5| 11.5| 160.3| 268
281407CY| 7 G 2.5| 12.4| 213| 327
281204CY| 4 G 4.0| 12.3| 198.5| 315
281205CY| 5 G 4.0| 14.2| 242.7| 388
281004CY| 4 G 6.0| 15.3| 284.236| 552
280804CY| 4 G 10.0| 18.5| 458.4| 857
Last Update (08.11.2021)
©2021 Lapp Group – Technical changes reserved
Product Management www.lappkabel.de
You can find the current technical data in the corresponding data sheet.
PN 0456 / 02_03.16