D-Link DGE-530T Gigabit Desktop PCI Adapter Quick Install Guide

D-Link DGE-530T Gigabit Desktop PCI Adapter

Thank you for purchasing the Gigabit Desktop PCI Adapter. Follow the easy steps in this guide to properly set up your adapter. Please verify that all the package contents listed below are available.

Package Contents

If any of the above items are missing, please contact your reseller.

System Requirements

• A computer with an available 32-bit PCI bus master slot operating at 33MHz
• Windows® 2000, 2003, 2008, XP, Vista®, 7, 8, Linux 2.4.x and above, or Mac OS 10.2.x and above
• 512MB of RAM (1GB or more recommended)
• Intel Pentium 4 processor 2.0GHz (or equivalent) or faster
• CD-ROM Drive

Installation

Note: Do NOT plug the adapter into your computer before installing the drivers. Also, write down the serial number and hardware revision (e.g. C1) before installing the adapter. If you contact technical support, you will need this information.

• Step 1 – Turn on your computer and Insert the D-Link DGE-530T Driver CD into the CD-ROM drive. The step-by-step instructions that follow are shown in Windows® XP. The steps and screens are similar for other Windows operating systems.
  If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run command box type D:\autorun.exe (where D: represents the drive letter of your CD-ROM drive). Drivers for non-Windows operating systems are located on the D-Link CD.

• Step 2 – When the autorun screen appears, click Install Driver. An Installation Wizard will guide you through the process, no matter which operating system you are running. This process will install drivers and software.
  

• Step 3 – Once the installation is complete, click OK to finish.

• Step 4 – Install the DGE-530T into your computer.

  • a. Shut down the computer, unplug its power cord, and remove the chassis cover. Note that opening the case of your computer may compromise the warranty of your computer. Consult the computer manufacturer before opening the case to ensure that you adhere to warranty guidelines.
  • b. Insert the contact edge of the DGE-530T card into the connector of any available PCI Bus Master expansion slot. Press the card firmly into the connector such that the card’s contacts are fully seated in the connector.
  • c. Install the bracket screw that secures the card to the computer chassis.
  • d. Replace the computer’s chassis cover. Connect an Ethernet cable from the adapter to your router, switch or Ethernet device.

• Step 5 – Plug in the power cable, and power on your computer. Once you boot your computer, Windows® will automatically install the drivers.

  • Windows XP users: You will receive a pop-up window stating that Windows found the DGE-530T adapter.
  • Windows® 7/8/Vista® users: You will receive a pop-up window stating Windows has finished installing the DGE-530T adapter.

• Step 6 – Please refer to the user manual on the supplied CD-ROM for more information on configuring your adapter and advanced features.

Technical Support

Having trouble installing your new product? D-Link’s website contains the latest user documentation and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website.

United States

• Internet: http://support.dlink.com
• Canada Internet: http://support.dlink.ca

Trademarks

©2014 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the property of their respective owners. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details.

FAQ’s

What is the D-Link DGE-530T Gigabit Desktop PCI Adapter?

The D-Link DGE-530T is a Gigabit Ethernet PCI adapter designed to provide high-speed wired network connectivity to desktop computers.

Gigabit Ethernet refers to network technology that supports data transfer rates of up to 1000 Mbps (1 Gbps), significantly faster than traditional Ethernet connections.

How does the DGE-530T connect to a computer?

The DGE-530T is installed in a desktop computer's PCI slot, providing a direct wired connection to the local network or the internet.

What are the benefits of using a Gigabit Ethernet adapter?

Gigabit Ethernet offers faster data transfer speeds, making it suitable for demanding tasks such as large file transfers, online gaming, and media streaming.

Is the DGE-530T compatible with all desktop computers?

The DGE-530T is compatible with desktop computers that have an available PCI slot for expansion cards.

Does the DGE-530T require driver installation?

Yes, the adapter requires driver installation to ensure proper functionality. Drivers are typically included with the adapter or available for download from the manufacturer's website.

Does the adapter support auto-negotiation?

Yes, the DGE-530T supports auto-negotiation, which allows it to automatically adjust its connection settings for optimal compatibility and performance.

Does the DGE-530T support full-duplex communication?

Yes, the adapter supports full-duplex communication, enabling simultaneous data transmission and reception, further enhancing network efficiency.

Can the DGE-530T be used with servers or workstations?

Yes, the adapter can be used with servers or workstations that have an available PCI slot, providing fast and reliable network connectivity.

What is jumbo frame support?

Jumbo frames are larger data packets that can improve network efficiency for specific applications, such as file transfers and media streaming. The DGE- 530T may support jumbo frames for enhanced performance.

Is the DGE-530T suitable for home or office networks?

Yes, the DGE-530T is suitable for both home and office networks, offering high-speed connectivity for various tasks.

Can the adapter be used with virtualization technologies?

Yes, the DGE-530T can be used in virtualized environments to provide network connectivity to virtual machines running on a host computer.

References:D-Link DGE-530T Gigabit Desktop PCI Adapter – Device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>