MARZ DESIGNS MARZ-TERR-0-LA Terra 0 Long Articulating Installation Guide
- June 12, 2024
- Marz Designs
Table of Contents
MARZ DESIGNS MARZ-TERR-0-LA Terra 0 Long Articulating
Product Information
- Product Name: Terra 0, Long Articulating 240V
- Product Code: MARZ-TERR-0-LA
- Rated Voltage: 220-240VAC
- Frequency: 50 HZ
- Fitting: 1 lamp 4.5W LED
- Lamp Type: G9
Danger: Lights must be installed by a qualified electrician. Electric shock risk.
This luminaire is intended for mounting to a wall. Terminal block shall conform to IEC 60998-2-1 or IEC 609982-02 and must comply with the following specifications: www.marzdesigns.com
Product Usage Instructions
- Drill a 65mm hole in the wall (A) using a holesaw to allow for cable termination.
- Use wall anchors (not provided) to fix the Universal Mounting Plate (B) to Wall (A). Ensure the Universal Mounting Plate is installed level.
- Connect the electrical leads from the wall to the leads from the fixture. Ensure the wires are secure and no bare wires are exposed, using an enclosed junction box.
- Install the Canopy (C) on the wall over the Universal Mounting Plate (B) and secure it in place with the screw head caps (D) supplied.
- Push the Light Globe (E) into the Fixture Socket.
- Screw the Glass Cover (G) onto the Fixture Socket. Align the threads properly for a smooth rotation before twisting to avoid jamming. Do not over-tighten the globe.
Note: Make wire connections. For 240V, attach the neutral wire from the fixed installation to the black cable marked with N. Attach the live wire from the fixed installation to the white cable marked with L. Attach the earthing wire from the fixed installation to the yellow/green cable.
INSTALLATION GUIDE
Attention! Please carefully read instructions before use
| PRODUCT: | T err a 0, Long Articulating 240V |
|---|---|
| PRODUCT C ODE: | MARZ-TERR-0-L A |
| RATED VOLTAGE: | 220-240 V A C |
| FREQUENCY : | 50 HZ |
| FITTING : | 1 lamp 4.5W LED |
| L AMP TYPE: | G9 |
DANGER : Lights must be installed by a qualified electrician. Electric shock risk.
- Turn off electrical power before beginning installation and use caution when installing.
- Please do not modify or adjust any fixture in a way that is not clearly stated or
- Always ensure the power is off and the luminaire has cooled down before performing any maintenance to the fitting.
- To avoid injury or damage to the luminaire, ensure that power leads and screws are secure before connecting the power.
- Select a suitable location away from liquids and hazards.
- Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners
- To avoid electric shock, do not touch this item if your hands are wet.
- To clean, wipe with a soft damp Do not soak or immerse the luminaire in water or other liquids.
- Do not use if any breakage or distortion is found on the wiring or socket, or if the products have been
- Marz Designs is not responsible for any damages caused by not following the provided instructions.
This luminaire is intended for mounting to a wall:
- Carefully check the luminaire and wiring for damage before use. Do not use the fixture if it is damaged.
- Ensure that local voltage and frequency match the marking.
- For indoor use
- Do not disassemble the structure of the fixture.
- Do not leave children alone with the
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer to avoid hazard.
- Please use reliable suspending and fixing devices to avoid
- This is a Class I device and must be connected to a protective grounding.
- The terminal block and connection box is not
- Only qualified personnel may install this Please obser ve national installation regulations.
The terminal block shall conform to IEC 60998-2-1 or IEC 60998- 2- 02 and must comply with the following specifications:
- With screw or screw-less terminal
- Two terminal poles;
- Rated voltage: 250V
- Rated connecting capacity: 10 A; 3 x 75-1.5mm²
- During installation, ensure that the basic insulation of the supply lead does not touch the wall cover. Use proper insulation so that the clearance and distance between the live parts and the wall cover is more than 6.5mm between the basic insulation of the supply lead and 3.6 mm between the wall cover.
- Keep the terminal block inside the wall cover or fixed to the wall.
Terra 0 Long Articulating
INSTRUCTIONS
-
Drill 65m m hole in Wall (A) using holes aw to allow for cable termination. Use Wall Anchors (not provided) to fix the Universal Mounting Plate (B) to Wall (A).
NOTE : Ensure Universal Mounting Plate (B) is installed level. -
Connect electrical leads from the Wall to the leads from the Fixture. Ensure the wires are secure and no bare wires are exposed, using an enclosed junction box.
-
Install the Canopy (C) on the Wall over the Universal Mounting Plate (B) and secure it.
-
place with screw head Caps (D) supplied. Push the Light Globe (E) into the Fixture Socket.
-
Screw the Class Cover (C) onto the Fixture Socket.
CAUTION : Align threads properly for a smooth rotation before twisting to avoid jamming. Do not over-tighten the globe.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>