MONSGEEK ICE75 RGB Multi Modes Mechanical Keyboard User Manual

June 15, 2024
MONSGEEK

MONSGEEK ICE75 RGB Multi Modes Mechanical Keyboard

Thank you for supporting MonsGeek

To provide you with a better user experience, please read this manual carefully before using the product.

Packing List

System Requirement

Windows® XP I Vista / 7 / 8 / 10 or higher version

USB Connection

Connect the keyboard to your computer by plugging in the USB cable into an available USB port to start using it.

ICE75 LED Indicator List

Status Indicator Re-Connecting Pairing Connected
Bluetooth device 1 LED for Key E Blue light blinks slowly Blue light blinks
fast Blue light stays on for 2

seconds and then tums off
Bluetooth device 2| LED for Key R| Blue light blinks slowly| Blue light blinks fast| Blue light stays on for 2
seconds and then turns off
Bluetooth device 3| LED for Key T| Blue light blinks slowly| Blue light blinks fast| Blue light stays on for 2
seconds and then turns off
2.4G wireless device| LED for Key Y| Green light blinks slowly| Green light blinks fast| Green light stays on for 2
seconds and then turns off
Wired mode| LED for Key U| N/A| N/A| Red light stays on for 2
seconds and then turns off
Low Battery| Independent LED Indicator Steady green (near spacebar)| Red light blinks slowly
Charging| Steady green
Fully Charged| Light off
Caps| LED for Caps Key| Steady white
Lock Win| LED for left Win Key| Steady white

ICE75 HotKeys

Fn+ Fl = My Computer
F2 E-mail
F3 Windows Search
F4 Browser Homepage
F5 Multimedia Player
Fn+ F6 = Play/Pause
F7 Previous Song
F8 Next Song
C Calculator
M Mute
Fn+ I = Insert
P Print SCR
< Decrease Volume
> Increase Volume
W Swap WASD With

 ICE75 System Commands (Windows)

Adjust Volume / Light Brightness

Lock Win key| Restore Factory Settings| Revert Ctrl Menu Key| Win System Mac System
---|---|---|---
Pree Fn and left Win key| Hold down Fn and press – key for 5s| Hold down Fn and press right Ctrl key for 3s| Hold down Fn and press o key for 3s

ICE75 System Commands (Mac)

F1 Decrease display brightness
F2 Increase display brightness
F3 Open mission control
F4 Activate Siri
Right Alt Command
F7 Skip back (Audio)
FS Pause/Play (Audio)
F9 Skip forward (Audio)
F10 Mute
F11 Volume down
F12 Volume down
Left Win Option
Left Alt Command

ICE75 Backlight Settings

Fn+- Slower Animation
Fn+- Faster Animation
Fn+ Bright
Fn+↓ Dim
Fn+ Set animation direction to left
Fn+ Set animation direction to right
Fn+L light Off/On
Fn+Z Side light brightness cyclically adjustable in 5 levels
Fn+Home Effect 1, Effect 2, Effect 3, Effect 4, Effect5
Fn+PgUp Effect6,Effect7, Effect 8, Effect 9, Effect10
Fn+End Effect 11, Effect 12, Effect 13, Effect 14, Effect 15
Fn+PgDn Effect 16, Effect 17, Effect 18, Effect 19, Effect 20
Fn+| This shortcut allows you to set the backlight color to 7 single color

with RGB loop effect
Fn+Left Ctrl| Side light modes cyclically adjustable in 6 levels (including OFF option)
Fn+Left Alt| In side light mode, adjust the light color to 7 single colors + RGB circle
Fn+X| Side light animation speed cyclically adjustable in 5 levels

ICE75 Wireless/Wired Connection Guide

Fn + E = Bluetooth Device 1
R Bluetooth Device 2
T Bluetooth Device 3
Y 2.4G Wireless Device
U Wired Mode

Bluetooth Pairing

After turning on the keyboard, press Fn-1-E/R/T to enter Bluetooth mode. Press and hold the FntE/R/T combination key for 3 seconds to put the keyboard in pairing mode, with the blue indicator light flashing quickly. After connecting, the indicator light remains on for 2 seconds. If no available device is connected, the LED indicator will tum off and the keyboard will enter sleep mode.

2.4G Pairing

After turning on the keyboard, press Fn+Y to enter 2.4G mode. Then press and hold the Fn+Y combination key for 3 seconds to enter pairing mode. Then insert the receiver, and the green indicator light will flash quickly. Once pairing is successful, the LED indicator will stay on for 2 seconds. If no available device is found within 30 seconds, the LED indicator will tum off and the keyboard will enter sleep mode.

Battery Level Check

PresstheFn+Spiteecombinationkeystoched:thebatterylevelinwirelessmode.lfthebatterylevelisbetow30%, the LEO for number keys 1-2 will show ;i red light. If it’s between 30-100%. the LED for number keys 1-9 will show a green 6ghl And when the battery is fully charged, the LED for number keys 1-0 will show a green light.

Key/Lighting Effects Customization Instruction

  1. The key/lighting effects customization can be programmed with MonsGeek Driver
  2. The lighting effects can also achieve music rhythm effects with MonsGeek driver
  3. Please visit monsgeek.com/download/ to download the driver

MONSGEEK Warranty and Service Statement

  1. MONSGEEK offers a One-Year warranty for customers in mainland China.
    For other regions, please contact your seller (MonsGeek distributor) for specific warranty details.

  2. If the warranty period expires, customers are responsible for repair costs.
    MONSGEEK provides instructions for self-repair if preferred, but users assume full responsibility for any losses incurred during the process.

  3. Defects resulting from disassembly of our product, improper usage and incorrect installation are not covered by warranty.

  4. Return and warranty policies may vary across platforms and are subject to the specific distributor’s terms at the time of purchase.

Company: Shenzhen Yinchen Technology Co., Ltd
Address: 33 Langbi Rd, Bitou Community 1st Industrial Zone, Bao’an District, Shenzhen, China
Tel: 0755-23216420
Website: www.monsgeek.com
Origin: Shenzhen, China
**WARNING:  water and beverags Can’t be poured into the keyboard.

Precautions
Man-made damage is not limited to immersion, falling off, and pulling off the wires with excessive forces, etc.
**

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals