milwaukee M12 CML LED Colour Matching Light Installation Guide
- June 12, 2024
- Milwaukee
Table of Contents
Nothing but HEAVY DUTY
M12 CML LED Colour Matching Light
Installation Guide M12 CML
Original instructions
M12 CML LED Colour Matching Light
Picture section with operating description and functional description
Text section with Technical Data, important Safety and Working Hints and
description of SymbolsRemove the battery pack before starting
any work on the machine.
MODE memory : the selected
operating mode is available again when switching on again.
TECHNICAL DATA
TECHNICAL DATA | M12 CML |
---|---|
Type | Battery-Lamp |
Rated power input | 18 W |
Battery voltage | 12 V |
Luminous flux High
Medium
Low| 1000 Im
600 Im
300 Im
Lighting time (4.0 Ah) High
Medium
Low| 6 h
8 h
14 h
Colour rendering index (CRI)| 98+
Colour temperature| 2700 K / 3500 K / 4500 K / 5500 K / 6500 K
Protection class| IP54
Weight according EPTA-Procedure 01/2014 (2.0…6.0 Ah)| 0,58 …. 0,83 kg
Recommended ambient operating temperature| -18°C … +50 °C
Recommended battery types| M12B…
Recommended charger| M12-18 C; M12-18 FC: M12-18 AC: M12 C4; C12 C
**WARNING!** Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury. Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS BATTERY-LAMP
Warning: Do not direct the light beam at persons or animals and do not
stare into the light beam yourself (not even from a distance). Staring into
the light beam may result in serious injury or vision loss.
Ensure that the luminaire does not cause harm if its magnet fails to keep it
is position.
SAFETY INSTRUCTIONS BATTERY
Battery acid may leak from damaged batteries under extreme load or extreme
temperatures. In case of contact with battery acid wash it off immediately with
soap and water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
Warning! To reduce the risk of fi re, personal injury, and product damage due
to a short circuit, never immerse your tool, battery pack or charger in fl uid
or allow a fl uid to fl ow inside them.
Corrosive or conductive fl uids, such as seawater, certain industrial
chemicals, and bleach or bleach containing products, etc., can cause a short
circuit.
SPECIFIED CONDITIONS OF USE
The colour matching light creates light that is close to natural sun light to
match colour specs for painting cars and detecting scratches and imperfections
cars for detail work.
It also can be used for general and heavy maintenance, collision repair and
paint re-work.
Do not use this product in any other way as stated for normal use.
SELECT COLOUR TEMPERATURE
Diff erent colour temperatures can be selected by pressing the colour button.
Display | Colour temperature |
---|---|
27 | 2700 K |
35 | 3500 K |
45 | 4500 K |
55 | 5500 K |
65 | 6500 K |
NOTES FOR LI-ION BATTERIES
Use of Li-Ion batteries
Batteries which have not been used for some time should be recharged before
use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery.
Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and batteries must be kept clean.
For an optimum life-time, the batteries have to be fully charged, after used.
To obtain the longest possible battery life remove the battery pack from the
charger once it is fully charged.
For battery storage longer than 30 days:
Store the battery where the temperature is below 27°C and away from moisture
Store the battery in a 30% – 50% charged condition
Every six months of storage, charge the battery as normal.
Transport of Li-Ion batteries
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with local,
national and international provisions and regulations.
- The user can transport the batteries by road without further requirements.
- Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations.
- Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.
When transporting batteries:
- Ensure that battery contact terminals are protected and insulated to prevent short circuit.
- Ensure that battery pack is secured against movement within packaging.
- Do not transport batteries that are cracked or leak. Check with forwarding company for further advice
MAINTENANCE
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
Use only Milwaukee accessories and Milwaukee spare parts. Should components
need to be replaced which have not been described, please contact one of our
Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the
machine type printed as well as the six-digit No. on the label and order the
drawing at your local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
| Please read the instructions carefully before starting the machine.
---|---
| CAUTION! WARNING! DANGER!)
| Do not stare at the operating light source.)
| Class III electrical protection.
| Do not dispose electric tools, batteries/rechargeable batteries
together with household waste material.
Electric tools and batteries that have reached the end of their life must be
collected separately and returned to an environmentally compatible recycling
facility.
Check with your local authority or retailer for recycling advice and
collection point.
| European Conformity Mark
| UK Conformity Mark
| Ukraine Conformity Mark
| EurAsian Conformity Mark
Copyright 2021
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden
Germany +49 (0) 7195-12-0
www.milwaukeetool.eu
Techtronic Industries (UK) Ltd
Fieldhouse Lane
Marlow Bucks SL7 1HZ
UK (11.21)
4931 4706 20
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>