PYLE PGMC2WPS4 PS4 Game Console Handle Wireless Controller User Guide
- June 4, 2024
- Pyle
Table of Contents
PYLE PGMC2WPS4 PS4 Game Console Handle Wireless Controller
Brief Introduction
The Controller is specially designed for PlayStation 4 console, adapting Dual
Shock 4 wireless controller program. It’s equipped with latest motion sensing
technology, built-in three-axis gyroscope and threeaxis accelerator. With the
three features, it can detect omnidirectional dynamic information including
Roll, Pitch and Yaw. In addition to induce tilt angle of the controIIer, it
can also capture the 3 axis acceleration information of three-dimensional
space X, Y, Z, and transmit all information captured to the game system
quickly. With this function, players can use this PS4 Dual Shock 4 controller
to operate special games. It’s also featured with a new function: Dual-point
capacitive sensing touchpad on the front of the controller. It’s the first
controller which can support Windows PC.
There are several built-in output connection ports in the controller:
3.5mm headset jack, Micro-USB charging port, extension port and built-in
speaker. Among them, the 3.5mm stereo headset jack can connect headset and
microphone, allowing Users to receive and transmit audio at the same time.
Introduction
The controller is loaded with a light bar which can glow various colors, different colors represent different pIayers, they can also used as important message tips such as reduction of players life value and so on. What’s more, the light bar also can interact with Playstation camera, so that the camera can determine the movement and distance of the controller.
Features
- Standard buttons: P4, Share, Option, , , , , , , , , L1, L2, L3, R1, R2, R3, VRL, VRR, RESET
- Supports Any Software Version of PS4 Console
- Wireless BT 4.2, receiving distance (open maximum distance of 10 meters)
- Equipped with 6-axis sensor which is composed by 3D acceleration sensor and gyro sensor
- With RGB LED Color Channel Instructions
- Supports dual-point capacitive sensing touchpad
- Equipped with 3.5mm stereo headset jack and built-in speaker
- Supports double motor vibration function
- Wide Operating Voltage Range, Ultra Low Sleep Current
- Full function as original Dual Shock 4, works with PC by installing driver (no driver needed for Windows 10 and Android 5.0)
Product Function
PS4 Platform function
- The six-axis function consisting of 3D and G is as follows:
- Six-axis Basic Description
- X axis: Acceleration movement of X axis is: left right, right left. Representative game disc: NBA07
- Y axis: Acceleration movement of Y axis is: front back, back front. Representative game disc: NBA07
- Z axis: Acceleration movement of Z axis is: up down, down up. Representative game disc: NBA07
- Roll axis: Tilt from left and right taking the Y axis as the center axis, movement of Roll axis is: flat tilt left, flat tilt right . Representative game disc: BLAZING ANG, TONY HAWK’S, GENJI, RIDGE RACER.
- Pitch axis: Tilt from front and back taking the X axis as the center axis, movement of Pitch axis is: flat tilt front, flat tilt back. Representative game disc: BLAZING ANG, TONY HAWK’S, GENJI.
- Yaw axis: Rotate from left and right taking the Z axis as the center axis, movement of Yaw axis is: flat rotate left, flat rotate right. Representative game disc: NBA07, TONY HAWK’S.
Standard-PS4 working mode
The controller can fulfill any function in games on PS4 console, including
basic digital and analog buttons as well as six-axis sensor and color display
function of LED. At the same time, regarding to certain games, it supports
vibration function. But when test on Windows 10 PC, a virtual 6-axis 14-key +
visual helmet function device appears, at this point, no operation can be
carried on. Default interface of 6-axis 16 keys 1 POV under Windows 10 system
is as below:
Sensor Calibration
Sensor Calibration is completed automatically when testing PCBA, no need any
calibration any more.
Sleep Mode
The controller enters into Sleep mode if it fails to get connection with PS4
console after it’s under search status for 30 seconds or if no buttons pressed
and no big movement of 3D analog for 10 minutes. You can wake up the
controller by pressing PS button.
LED Indication
Led indicators will enter into breathing light mode if the controller is
charging under power off status, and the color is random. The light goes off
when controller is full charged.
- Different light colors of each controller when several controllers connected to one Console at the same time: User 1 blue light, User 2 red light, User 3 green Iight, User 4 pink light.
- Stand-by mode: orange light
- Charge while playing: blue light
- Charge while in stand-by mode: orange light, and light goes off when full charged
- Controller lose connection: white light
Wireless BT Connection:
A data-capable USB cable is required to wired connect the controller to PS4 console for the first time you use this controller on the current Console. Hold the PS button, the LED light bar will keep a single color, connected successfully, after the first time, hence you can connect the controller to the Console wirelessly via BT. One PS4 console can only support 7 BT devices at the same time no matter it s connected wired or wirelessly.
Correspondence of Standard PS4 and PC buttons (Chart)
Electrical Parameters
Electrical parameters (All voltages are referenced to GND and the ambient
temperature is 25 degrees)
Limited rating (All voltages are referenced to GND and the ambient
temperature is 25 degrees)
When a firmware update of the PS4 Console is instaIIed, it can be possible that the functions in the adapter may be affected, then you will need to update the controller as well to fix these issues SONY® and PS4™ are registered trademarks of Sony® Computer Entertainment Inc.
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>