ACDC DYNAMICS MJ-01-100W Lighting Camera Security Floodlight User Manual
- June 12, 2024
- ACDC DYNAMICS
Table of Contents
ACDC DYNAMICS MJ-01-100W Lighting Camera Security Floodlight
Operating Instructions
Packing List
- Lamp Cap
- Solar Panel
- Remote control
- Installing Support
- Screws
- Operating Manual
Installing
Light-control Detection.
take out lamp cap
Press the key [AUTO]
The light turn on automatically
Then, tightening the waterproof wire and placing the solar panel towards the sunligt, the light will turn off automatically and the charging indicator will flash regularly. It means the light control functions is working well.
(Please tighten the wire in the direction of the arrow)
Key Instruction of Remote Control
Auto mode
Tightening the waterproof wire and pressing the key “AUTO”,
the light will automatically turn on for 4 hours in the dark.
After 4 hours of light-operated mode, it will switch to radar mode.
(The remote control has memory function, you can set only once)
Remote- Control the specified functions are shown below.
Important Notes
- Please do not connect 220V AC to avoid damaging the solar lamp.
- Please do not disamble the lamp to avoid affecting the warranty.
- Please clean dust on the solar panel surface every 3 months to avoid affecting the power generated afficiency.
Monitor Configure Network
ONE: Connect WIFI
Connect WIFI with your mobile phone, and, make sure the network signal is good
Tips: please make sure the lamp, cellphone and
WIFI are within (3 meters during configuring network)
TWO: Download “ACDC Smart App”
scan QR code at right right to get the APP, or search “ACDC Smart App” in App Store or Google play (Tips: Available for Android and IOS)
Scan and download APP
THREE: Register APP
please use the cellphone number or email address to register an account in“ACDC Smart App
FOUR: Turn on the monitor switch
Monitor Configuration Network
FIVE: Add Device
Open the APP and follow the steps below
Installing
Fix the product on the wall with expansion screws. The installation height is suggested to be be 3-5 meters.
Make sure the solar panels are installed at the correct angle and they will not be blocked by the obstacles from the sunlight.
Tips:
- Installation direction of the solar panel is 5-10 degrees south to west, and angel of 35 degrees with the horizontal place.
- Please install the solar panel in the sun direction to avoid affecting the power generation efficiency.
- Please ensure the installation is stable.
Functional Specification
Main function of APP
Other Functions
Change username. When changes the username you should remove device in settings. After successfully removed, you can use other username to log in
Share device, When shares device to others, the shared user should register an account in “ACDC Smart App”the master user can add the account of the shared user in settings.
Important Notes
Storage settings. Recording mode includes “even recording” and “non- stop” You
can select different mode according to your needs.
it is suggesrted to select “event recording” mode because it save electricity.
Motion detection alarm. You can select low medium or high sensitivity according to your needs. Checking motion detection alarm information, please click “Me” in main page then “message center” and “Alarm”.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>