BlitzMax BM-CT2 Open Ear Headphones User Manual

BlitzMax BM-CT2 Open Ear Headphones

USING INSTRUCTIOM

Product Information

• Product Name: BM-CT2L,BM-CT2R
• Model: BM-CT2L,BM-CT2R
• Compliance Approval : The device has been evaluated to meet general RF exposure requirement.

Product Usage Instructions

1. Ensure that any changes or modifications to the device are approved by the party responsible for compliance. Unauthorized modifications may void the user’s authority to operate the equipment.
2. The device is designed to be used in portable exposure conditions without any restrictions. It can be used in various environments and situations.
3. Before using the device, make sure to familiarize yourself with the user manual for detailed instructions on setup, operation, and maintenance.
4. To operate the device, follow these steps:
   • Insert the required batteries or connect the device to a power source as specified in the user manual.
   • Turn on the device using the power button or switch.
   • Refer to the user manual for specific instructions on how to use the device’s features and functions.
   • When finished, turn off the device and disconnect it from the power source if applicable.
5. It is important to handle the device with care and avoid exposing it to extreme temperatures, moisture, or physical damage that could affect its performance.
6. In case of any issues or concerns with the device, refer to the troubleshooting section of the user manual or contact customer support for assistance.
7. Regularly clean and maintain the device according to the instructions provided in the user manual to ensure optimal performance and longevity.
8. Follow all applicable laws and regulations regarding the use of the device, including RF exposure guidelines and restrictions in your region.

PRODUCT INTRODUCTION

CHARGING

• Please use the provided USl3 Type-C charging cable to charge.
• Do not use a power source exceeding 5V=2A.

POWER ON/OFF

1. Open t he case, the headphones will power on automat ically. For the first time use, please remove the insulation protective fllm inside the case and f ully charge t he headphones before using.
2. Place BM-CT2 into the headphone case and close it to begin charging. “If the headphone is outside t he case and not connected for more than 5 minutes, it will automatically power off.
3. When the headphone case is not nearby: “To manually power off, simply press and hold the control button on either earphone for 3 seconds.
   • To manually power on, press and hold the control button on the earphone for 3 seconds to activate the specified earphone

BLUETOOTH PAIRING

Power on the headphones by opening the headphone case, and they will enter pairing mode automatically.
“If you are unable to pair the headphones, follow these steps:

1. Take out either earphone from the case.
2. Press the control button on the earphone 6 times consecutively.
3. Place the earphone back into the case.
4. Open the headphone case again to initiate pairing mode. The headphones should now be ready to pair with your device.

Select ‘BM-CT2″ from the device’s Bluetooth list for pairing.

• For the first-time use, the headphones will automatically errter pairing mode, indicated by the alternating red and white fiashing lights.
  When the headphones are placed back into the headphone case, the Bluetooth connection will be automatically disconnected.

AUTOMATIC RECONNECTION
Once the headphones have a paired connection record, opening the headphone case will automatically reconnect them to the most recently connected device. If the automatic reconnection is not successful, please manually operate on the Bluetooth interface of the device.

CONNECTING TO A NEW DEVICE WHILE ALREADY CONNECTED
If the headphones are already connected to a device and you want to connect them to a new device, simply repeat the Bluetooth pairing process.

RECONNECTING AFTER A LONG DISTANCE DISCONNECTION
If the connection between the 13M-CT2 headphones and the device is lost due to being out of range, the following scenarios apply:

1. lf you return within the effective range within 5 minutes, the headphones will automatically restore the connection with the device.
2. lf you are out of range for more than 5 minutes and than retum within the effective range, you will need to manually reconnect the headphones to the device from the device’s Bluetooth settings.
   Please note that the exact reconnection process may vary depending on the device and its 131uetooth settings. Refer to the device’s user manual or consult the manufacturer’sinstructions for detailed steps on manually reconnecting Bluetooth devices

HEADPHONE CONTROLS (MUSIC/CALL)

Clear pairing lnfDrmatlan: Press the control button on the earphone 6 times consecutively to restore factory settings and power off.

STATUS INDICATOR LIGHT

STATUS INDICATOR LIGHT

• If not charging, close the case, and the light turns off after 10 seconds.

SPECIFICATIONS

FCC STATEMENT

This device comp lies with part 15 of the FCC Rules. Operation Is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class 13 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will net occur in a particular Installation. If this equipment does cause hannful interference to radio or television reception, which can be determined by turning the equipment off and on, t he user is encouraged to try to correct the interference by ona or more of the following measures:

• Reorient or relocate the receMng antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from t hat to which the receiver Is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can beused in portable exposure condition without restriction

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>