BlitzMax BM-K10 Kids Karaoke Machine Mini Portable Bluetooth Speaker User Manual

BlitzMax BM-K10 Kids Karaoke Machine Mini Portable Bluetooth Speaker

BUTTON & INTERFACE

1. Press and hold for 3s to turn ON or OFF/ press to switch lighting effect I double press to switch playback mode(TF card- AUX-Bluetooth,
   Bluetooth mode by default, and prioritize rear Insertion.)

2. Press and hold 3s to disconnect the Bluetooth / press to pause or play/ double press to remove or restore Music Vocals.

3. Press and hold for next track/ Press to increase the volume.

4. Press and hold for previous track/ Press to decrease Velum.

5. Type-C Charging Port

6. 3.5mm AUX Audio Input Port

7. TF Card Slot

MICROPHONE

FUNCTION

• Bluetooth Mode:
  Power on automatically enter Bluetooth mode, double-click the power button to switch modes, the voice “Bluetooth mode”. Open the cell phone bluetooth scanning, search for “BM-K10” and click on the pairing, there is a tone after successful connection. When pairing, the power indicator light flashes blue, after pairing successfully, the Indicator light Is solidly blue.

• TF card/ AUX Mode:
  Insert the TF card or AUX into the corresponding port and it will play automatically after recognition. (TF card supports up to 32G capacity and .mp3 format only}

SPECIFICATIONS

Speaker

Battery Capacity| 1800mAh / 6.66 Wh
Charging Input| DCSV 1A
Charging Time| 2-4h
Speaker Power Rating| SW
Wireless Range| Up to 10 meters
Product Size| 140•127_5*11.5mm
Wireless Microphone

Frequency Response| 60Hz-11kHz
Sensitivity| -54:t3dB
Battery Capacity| 500mAh
Charging Input| 5V 1A
Charging Time| 2-3h
Battery Endurance| 8-9h

CAUTION

1. Please check the specification of the charger before charging, and do not use a charger with a voltage exceeding 5V to charge the product
2. For healthy hearing, do not use at maximum volume for long periods of time.
3. Do not use near fire or in e high temperature environment to avoid damage to the product
4. Please follow the instructions, do not modify or disassemble the product.
5. Do not drop, hit, knock, crush or otherwise seriously effect the structure of the product to avoid damaging the stability and reliability of the product.
6. If the product encounters abnormal conditions such as high temperature, detonation, or corrosion, stop using the product immediately.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE:

• This equipment has been tested and found to comply with the limits fore Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>