FYNE AUDIO F5S Speakers Stand User Manual
- June 12, 2024
- FYNE AUDIO
Table of Contents
F5S STAND
FYNE ADVICE
ESSENTIAL INFORMATION GUIDE
CONTENTS
- 2 x Top plate
- 2 X base plate
- 8 X Leg columns
- 8 X 8mm Flat head countersunk bolts
- 8 X 8mm pan head bolts
- 8 X 8mm spikes
- 8 X Locking nuts
- 8 x Spike cups
- 8 X Bump on feet
- 1 x HEX key
INTRODUCTION
Thank you for choosing Fyne Audio, proudly designed by our experienced engineers and manufactured to exacting standards by our craftsmen in the United Kingdom. Before assembling these stands, please read this instruction leaflet in full, both for safety reasons, and to ensure you achieve the best performance possible. Please refer to www.fyneaudio.com for warranty information.
ASSEMBLY
- Fix the leg columns to the baseplate using the 8mm pan head bolts. Be sure the silver inserts in the base plate are facing away from the leg columns.
- After filling the tubes with optional mass loading material, fix the top plate to the other end of the leg tubes with the flat head countersunk bolts making sure the top plate has the countersunk indentations facing away from the legs.
- Attach a gel pad to each corner of the top plate or alternatively use pressure sensitive putty to secure your speaker to the stand.
- Turning the stand over, screw the isolation spikes through the inserts on the base module to the desired height.
- Screw the locking nut onto to the top of the spike until the spike locks in place and is secure.
- Use pressure sensitive putty to secure your speaker to the stand. For fine height adjustment after the speaker is in position, you can adjust the spike from above using the HEX key provided.
For wooden or hard flooring, please use the protective spike cups provided.
FYNEAUDIO
@FyneAudio
WWW.FYNEAUDIO.COM
F6480 0026 | 060623
References
Read User Manual Online (PDF format)
Loading......