8BitDo SN30 2.4G Wireless Gamepad Instruction Manual
- June 12, 2024
- 8Bitdo
Table of Contents
8BitDo SN30 2.4G Wireless Gamepad
INSTRUCTIONS
- To enter pairing mode, press and hold SELECT for 3 seconds.
Wireless connection
- Controllers will auto-reconnect to your devices once they have been paired.
Wireless connection
- Plug the retro receiver to your NES / SFC / SNES Classic console.
- Press START on the controller, the controller will look to pair with the receiver.
- Blue LED will stay solid when the connection is successful.
USB connection
- Connect the controller to your Windows/macOS/Android via the USB cable.
- Blue LED will stay solid when the connection is successful.
- Press and hold START for 3 seconds to switch the controller modes between Xinput, Dinput and Mac.
- • Xinput is the default mode.
Battery
- Status: LED Indicator
- Low battery mode: LED blinks in red
- Battery charging: LED blinks in green
- Battery fully charged: LED stops blinking
- Built-in 180 mAh Li-on with 25 Hours of play time.
- Rechargeable via USB cable with 30 minutes charging time.
Power Saving
- Sleep mode: 1 minute with no wireless connection.
- Sleep mode: 15 minutes with wireless connection but no use.
Support
- Please visit http://support.8bitdo.com for further information and additional support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>