ZKTeco ZK 65 Mobile Stand Installation Guide
- June 12, 2024
- ZKTECO
Table of Contents
ZKTeco ZK 65 Mobile Stand Installation Guide
Version: 1.1
- To ensure correct and safe use, please read carefully this manual before installation.
- It is recommended to equip this model with a 55 to 86 inch interactive whiteboard.
- The maximum weight of the bearing can support up to 100 kg.
Packing list
Note: “*” Indicates that due to differences in models, some models include this accessory, please refer to the current one.
Installation steps
Step 1
Adjust the wheel to the brake state and screw it into the brackets (as Figure 1).
Step 2
Attach the Wall Bracket to the Left Bracket (as Figure 2), 3 sets of mounting heights (1 & 4, 2 & 5, 3 & 6), optional on demand.
Step 3
Attach the right bracket to the other end of the bracket. wall (as shown in Figure 3).
Step 4
Installing the tray between the two supports (as in Figure 4).
Step 5
Attach the wall hanger bar to the entire machine as required. necessary (as shown in Figure 5).
step 6
Hang the complete assembled machine on the wall bracket and lock the safety screw on the Bar to hang on the wall (as in Figure 6).
Make sure the brakes are locked, this step requires at least 2 professionals to complete.
Step 7
Please refer to the following image to see the finished product.
OBSERVATIONS:
When the interactive whiteboard with its own hanging bar cannot be effectively combined with the tripod, you need to modify it together with the wall mount plate as shown below.
one
Attach the wall mount plate to the wall bracket.
two
Hang the interactive whiteboard on the wall mount plate and lock the safety
pin.
ZKTECO CO.,LTD. www.zkteco.comCopyright © 2020 ZKTECO CO., LTD. All rights
reserved.
ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia City, Dongguan,
China. Telephone: +86
769 – 82109991 Fax: +86 755 – 89602394