TOSHIBA HWS-IWF0010UP-E Estia Air to Water Split Heat Pump System Owner’s Manual

HWS-IWF0010UP-E Estia Air to Water Split Heat Pump System
Owner’s Manual OWNER MANUAL
Wireless interface for Air to Water Heat Pump

HWS-IWF0010UP-E Estia Air to Water Split Heat Pump System

Toshiba Home AC Control
Please visit the application store on your device to download and install Toshiba Home AC Control application.

Application Keyword : Toshiba Home AC Control
Toshiba Home AC Control application support

iOS 9.0 or later.
Android : Version 5.0 or later.

About Toshiba Home AC Control

1. Toshiba Home AC control can control system operation by smartphone or tablet (mobile device) via internet connection.
2. Everywhere control, software run on Cloud system and mobile device can set and monitor system operation.
3. Everyone can control, 1 Wireless interface maximum 5 User (use 1 email register).
4. Multi system control, 1 user can control 10 system.

Note :

1. Wireless interface can register only 1 email address, if register with new email current email will invalid.
2. 1 email address can use for register 5 mobile devices for control same system.

Installation for Wireless interface.

1. Open cover of Wireless interface and make hole for wire out.
2. Fix on wall or partition following fixing position, connect wire between Wireless interface and Hydro unit.
3. Close cover of Wireless interface

Note :

1. Be sure no electrical power before installing this product.

2. Wireless interface must not be installed in areas as below
   – Direct sunlight or areas exposed to outside air influences
   – Poor ventilation (near windows or other openings)
   – External heat sources (above radiators etc.)
   – Freezing or refrigerated areas
   – Do not install nearly device the can produce electrical noise such as elevators, automatic door and etc.

3. Do not modify for any electrical part, it can cause for malfunction, electric shock or fire.

4. Install area should be covered by Wi-Fi signal from Router.

5. Wireless interface compatible with router 2.4GHz band IEEE802.11 b/g/n standard.

6. Installation level should be 100 mm or more from floor.

7. Operating temperature should not over 55°C.

Open an application and follow register for User registration.

1 Tab Register| 2 Enter email address

3 Select country| 4 Enter user name

5 Enter password by
6-10 character, combination of alphabet and number| 6 Check for term and condition

7 Confirm information| 8 Information will submit to email, click link for confirm

Log in to Toshiba Home AC Control application.

1. Connect Wireless interface to system and turn on power supply.   * Note
2. In case of Wi-Fi router change or e-mail for register change need to re-process for add Wireless interface again (need to press SETUP button 1 time for active Access Point mode).
3. In case of change Wireless interface to use with other AC need to factory reset (press and hold SETUP 5s) and re-process for add Wireless interface again.
4. Open application and select Log in
5. Enter user name and password
6. Log in successful

Add Wireless interface for control by Toshiba Home AC Control application.        Wireless Adapter Type C Wireless adapter auto log in.
Add Wireless interface for control by Toshiba Home AC Control application.

Application information.

1. Home screen description. Submenu
2. Mode and condition setting.
3. Function Select Toshiba HOME ESTIA application.

Operation mode selection and merit function
Zone 1, Zone 2    

LED wireless adapter and AC ON/OFF control.

Weekly schedule set. Energy monitoring. In case of have some problem can check from Help menu.

Goo gle Assistant

Link account setup and add devices (ACs)

Google Assistant command

Example command device name is [ZONE 1 or 2 or DHW]
Power control
(ON/OFF)| OK Google, turn on the [ZONE 1 or 2 or DHW].
OK Google, turn off the [ZONE 1 or 2 or DHW].
Mode setting
(Available only for Zone1 and Zone2)| OK Google, set the [ZONE 1 or 2 or DHW] to Cool mode.
OK Google, set the [ZONE 1 or 2 or DHW] to Heat mode.
Temperature setting| OK Google, set the [ZONE 1 or 2 or DHW] temperature to 55 degrees.
OK Google, increase the [ZONE 1 or 2 or DHW] temperature by 5 degrees.
OK Google, decrease the [ZONE 1 or 2 or DHW] temperature by 5 degrees.
Status inquiry| OK Google, what is the [ZONE 1 or 2 or DHW] set to ?

Amazon Alexa

Link account setup and add devices (ACs)  Amazon Alexa command

Example command device name is [Bed room]
Power control
(ON/OFF)| Alexa, turn on the [ZONE 1 or 2 or DHW].
Alexa, turn off the [ZONE 1 or 2 or DHW].
Mode setting
(Available only for Zone1 and Zone2)| Alexa, set the [ZONE 1 or 2 or DHW] to Cool mode.
Alexa, set the [ZONE 1 or 2 or DHW] to Heat mode.
Temperature setting| Alexa, set the [ZONE 1 or 2 or DHW] temperature to 55 degrees.
Alexa, increase the [ZONE 1 or 2 or DHW] temperature by 5 degrees.
Alexa, decrease the [ZONE 1 or 2 or DHW] temperature by 5 degrees.
Status inquiry| Alexa, what is the [ZONE 1 or 2 or DHW] set to ?

Note :
“ The Wireless Adapter must be installed, maintained, repaired and removed by a qualifi ed installer or qualifi ed service person.”
“ Contact dealer and/or service center when equipment is malfunction.”

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>