tuya SD-110 Smoke Detector Camera User Manual

tuya SD-110 Smoke Detector Camera

Product Information

• This device is a product that operates within the guidelines and regulations set forth by the Federal Communications Commission (FCC) in the United States and Industry Canada in Canada. It is designed to comply with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). The device has been tested to ensure that it does not cause harmful interference and can accept any interference received without affecting its operation.
• This device also complies with FCC and Canadian radiation exposure limits for an uncontrolled environment. It is important to install and operate the equipment with a minimum distance of 20cm between the radiator and your body to ensure compliance with these limits.
• Users can obtain information regarding RF exposure and compliance specific to Canada by referring to RSS 102 RF exposure guidelines.

Product Usage Instructions

1. Ensure that the device is being used in accordance with the guidelines provided in the user manual.
2. Do not make any changes or modifications to the device that have not been explicitly approved by the manufacturer, as doing so may void your authority to operate the equipment.
3. When installing and operating the device, maintain a minimum distance of 20cm between the radiator and your body to comply with radiation exposure limits.
4. Do not use the device in a way that may cause harmful interference to other devices or systems.
5. If the device experiences interference from other sources, it must continue to operate without being affected. Accept any interference received.
6. Follow all applicable regulations and guidelines regarding RF exposure and compliance specific to your country.

Special Notes

1. Make sure you are using 2.4GHz wireless network, not 5GHz.
2. Make sure the RED LED light is blinking slowly when power on. if not, please reset the camera.
3. Make sure your camera and wifi router are not far away.
4. Make sure your phone is close to the camera when configuring
5. GO to Wi-Fi setting Of your smartphone to see if camera ID like
6. SmartLife_XXXXX-XXXXX is matched with the one we put the sticker on the device
7. Please do not connect camera ID SmartLife_XXXXX-XXXXX directly from Wi-Fi setting of your smartphone.
8. Make sure your Wi-Fi SSID do not contain any symbol or special characters
9. Make sure your camera is charged up to 24 hours for the first time use.
10. After finish setting up the camera, please remember to go to “settings” to find “Basic Function Settings” – “Status Indicator” to swift off the less indicator.

Key Benefits

• 100% Wire-Free: Free Of Ugly cords and wiring hassles
• HD Quality:Enjoy amazingly sharp 1080P live video
• Micro SD :Memory Card max up to 64GB (Not included), 8GB 400 days videos
• Built-in 6000mA battery: Battery supports to standby 6-8 months
• Low Power Consumption: 200uA at standby mode
• Support 7 days free trial Cloud Storage
• Night Vision:See what’s happening even in the dark
• Wi-Fi802.11 b/g/n wireless network
• Motion Alerts: Receive push notifications if anything moves
• Fast Response:l second enable recording even at standby mode
• Support amazon echo and Google Home

Product Details

SPECIFICATION

Charging the Battery

• This unit has a built-in rechargeable lithium battery. When using the unit for the first time, please charge it 24 hours. Open the device, make the USB power cable connected with charger seat and insert the charger into the electrical outlet. And turn on the device. The
• Green LED indicator will be blinking fast and after about 30-60 seconds turn to blink slowly 3 times; pause, and repeatedly,until charge 24 hours fully.
  ( Note : There is no LED indicator displayed during charging for the first 20 minutes when the battery is ran out completely.)

LED Light State Introduction

Product & Packlist

Product picture

Packing list:

Set up APP

IOS: Search “Smart Life” in Apple “APP store” Android: Search “Smart Life” on “Google Play” You also can scan the QR code below to download the APP
Once you download the APP to your smart phone, you may enter the first page which you can log in with your existing account or register.
(If you are the new user of Smart Life and don’t have an account, please choose register first and follow the below screenshots to complete the registration.)
(If you have an existing account,there are two ways to log in,one is with SMS verification Code, the other one is with a password In case you forget the password, you may choose login SMS verification code or you can choose forget the password to reset it by entering verification code which sent to you phone via message.)

Set up Camera

Place the camea on a flat surface close to home router, along with user’s mobile phone, turn on the “ON/OFF” switch to position. Red LED blinks within 180 seconds.
Insert SD card to SDcard slot(as picture), the SD card is not included in the package, should buy by yourself and it supports max to 128GB.
For reset the device, pls long press and hold the reset button, then you will listen a sound and see the indicator blinks red repidly. That means reset successfully.
Please fix the base on wall with screw.

Configure Device

Once the account has been setup successfully, then you will automatically enter the page of “add device”, kindly follow below steps to add the camera.

• Step 1: click “Add Device” or click”+” on top of right on this page.
• Step 2: choose “Security & Sensor” and click “Smart Camera” follow the sceenshots below.
• Step 3: You may choose next step to go to QR code paring mode if you choose the “next step”, you may follow the below screenshots: (Note: When scan the QR code, please make sure the camera faces the QR code.)

FAQ

After the configuration is done, our device will be showed on Smart Life APP which enable you to surf the smart living easily. If you have any questions about App using, you may go to category”me” to find the “Help Center” and check if you have the same issues. If not, you can report the issue and then your problems will be handled and answers will be given soon if you provide as much information as you can.

Safe Battery Handing and Usage
DO NOT allow the battery compartment to ge wet prior or during installation while your Wire-Free camera is weatherproof and safe to use outside.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>