LUMME LU-FN111A Floor Fan User Manual
- June 12, 2024
- LUMME
Table of Contents
LUMME LU-FN111A Floor Fan
Product Information
The LU-FN111A is a fan manufactured by Cosmos Far View International Limited. It is a versatile fan that comes with various parts and features.
Parts List
- Front grille
- Blade cap
- Blades
- Rear grille nut
- Rear grille
- Motor shaft
- Oscillating knob
- Motor
- Vertical adjustment screw
- Switch mode buttons
- Screw
- Extension pole
- Out-joint
- Stand tube
- Stand cover
- Base
- Fixation hoop
The actual set of parts may differ from what is listed in the user manual, so it is recommended to check the product before purchasing.
Specifications
- Power supply: 230V ~ 50Hz
- Power: 50W
- Net weight / Gross weight: 2.1kg / 2.5kg
- Package size (L x W x H): 435mm x 175mm x 435mm
Manufacturer:
The fan is produced by Cosmos Far View International Limited, located at Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China. The fan is made in China.
Warranty:
The warranty does not cover supplies such as filters, ceramic and non-stick
coating, rubber seals, etc. The production date can be found in the serial
number, which is located on the identification sticker on the gift box and/or
on the device itself. The serial number consists of 13 characters, with the
4th and 5th characters indicating the month of production and the 6th and 7th
characters indicating the year of production. The manufacturer reserves the
right to change the complete set, appearance, country of manufacture,
warranty, and technical characteristics of the model without notice.
Product Usage Instructions
CAUTION: Read the user manual carefully before using the appliance and save it for future reference.
Before the First Use
- Ensure that all parts are included in the package.
- Refer to the user manual for any specific pre-use instructions.
Using the Device:
Follow these steps to use the fan:
- Plug in the appliance to a power supply with 230V ~ 50Hz.
- Adjust the vertical position of the fan using the vertical adjustment screw (9).
- Use the switch mode buttons (10) to select the desired fan speed or mode.
- If needed, adjust the oscillation of the fan using the oscillating knob (7).
Cleaning and Maintenance
Before cleaning, always unplug the appliance. Do not use chemical and
abrasive cleaners for cleaning. For seasonal storage, use a carton to cover
the fan. Follow these steps to clean the fan:
- Loosen fittings and remove the front grille (1).
- Use a cloth soaked in soapy water to clean the blades (3).
- Do not immerse the appliance in water.
For any further information or assistance, please refer to the user manual or contact Lumme at http://lumme-ru.com or call 8(812) 325-23-34.
Parts list
- Front grille
- Blade cap
- Blades
- Rear grille nut
- Rear grille
- Motor shaft
- Oscillating knob
- Motor
- Vertical adjustment screw
- Switch mode buttons
- Screw
- Extension pole
- Out-joint
- Stand tube
- Stand cover
- Base
- Fixation hoop
Real set of the appliance could be different from listed in the User manual. Check once buy.
CAUTION
Read this manual carefully before using the appliance and save it for future
reference.
- Before the first use, check the device specifications and the power supply in your network. It is not intended for industrial use. For indoor use only. Use only for domestic purposes according to the instruction manual. Do not use with damaged cord, plug or other injuries. Keep the power cord away from sharp edges and hot surfaces.
- Do not pull the cord. Always take the socket. Do not reel the cord around the device housing. Never attempt to frame and repair the appliance by yourself. If you meet problems, please contact the nearest customer service center. Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
- Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use. To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Do not touch running parts of the fan. Keep foreign objects away from running parts and grille. Do not block air inlets on the motor block. Do not use the fan without protective grilles.
BEFORE THE FIRST USE
For packaging reasons the fan was delivered unassembled. Do not connect the fan to the mains supply before you have completely finished the assembly. Please take note of the following steps when assembling the fan. Tighten stand tube to stand base with screw. Fix base cover to stand base with a screw. Unscrew out-joint, put the stand cover and base cover on the stand base, pull the extension pole out then tighten the out-joint again. Place control box firmly on top of extension pole, tighten screw. Unscrew the blade cap by turning clockwise and rear grill nut by turning counter clockwise and put both blade cap and rear grill nut off the motor shaft. Put rear grille on motor shaft. Secure it with rear grille nut. Slide blades on motor shaft so that claws on motor shaft match the blades slots. Screw blade cap on shaft by turning counter clockwise. Put front grille on rear grille and close clips or screw grille ring to secure grilles together. Adjust the fan vertically by vertical adjustment screw. The fan is ready for work
USING THE DEVICE
NOTE: Do not use the fan in wet conditions (for example rain) in order to avoid electrical shocks.
- Always place the fan on a dry and even surface.To make the fan oscillate, push the oscillation button down; pull the button up to stop the oscillation.
SPEED CONTROL
To switch on the fan, simply press any of the speed control buttons:
- 1 – low airflow speed
- 2 – medium airflow speed
- 3 – high airflow speed
- 0 – off
CLEANING AND MAINTENANCE
Before cleaning, always unplug the appliance. Do not use chemical and abrasive cleaners for cleaning. For seasonal storage use carton to cover the fan. Loosen fittings and remove the front grille. Use a cloth soaked in soapy water to the fan fans. Do not immerse the appliance in water.
SPECIFICATION
Producer:
Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street , Ningbo, China
Made in China
THE WARRANTY DOES NOT COVER SUPPLIES
(filters, ceramic and non-stick coating, rubber seals, etc.)
The production date is available in the serial number located on the
identification sticker on the gift box and/or on the sticker on the device.
The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
The producer may change the complete set, appearance, country of manufacture,
warranty, and technical characteristics of the model without notice. Please
check when purchasing device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>