SwaddleMe B09DTDVMWY Slumber Buddies Deluxe Projector Night Light for Kids Instruction Manual

SwaddleMe B09DTDVMWY Slumber Buddies Deluxe Projector Night Light for

Kids

INSTRUCTION MANUAL

Slumber Buddies™ Deluxe

Thank you for purchasing Slumber Buddies™ from Summer Infant. The buddy system was designed to help create a tranquil and calming environment for your little one
at night. Using a comforting combination of three colors and your choice of 8 lullabies/ nature sounds and gentle vibration, Slumber Buddies™ easily soothes your child to sleep. This cute little character will quickly become your child’s best friend!

WARNING

• NEVER place product in crib.
• Do not leave infant unattended with product.
• Complies with all applicable US government safety regulations and the safety requirements of ASTM F963.
• Exercise care when unpacking and assembling product.

BATTERY WARNING

• Do not mix old and new batteries.
• Do not mix alkaline, standard, or rechargeable batteries.
• Remove batteries when product is stored for long periods of time or when batteries are exhausted.
• Dispose of exhausted batteries properly.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Batteries are to be inserted with the correct polarity.
• The supply terminals are not to be short-circuited.

TO USE:

NOTE: Batteries are included for the “Try Me” mode. To activate the normal play mode, move switch to any of the three timer positions. When in “Try Me” mode, each function will automatically shut off after I0 seconds.

Power/Timer Control:
The main on/off/timer switch can be found next to the battery door on the bottom of the unit. Open the pocket to locate the switch. Turn switch to the “Off” position during long periods of inactivity.

ON/OFF/TIMER CONTROL:

• Ist position: “Try Me” mode
• 2nd position: Off
• 3rd position: On/15 min auto shut-off
• 4th position: On/30 min auto shut-off
• 5th position: On/60 min auto shut-off

Nightlight/Selecting Display Color:
To choose a color for the nightlight star display, press the corresponding button to cycle through each of the four options – red, green, blue and light show (all colors). The display will automatically shut off after the set time has completed. Also, after cycling through each of the colors, press the button once more to turn the display off. The main on/off/timer switch can be found next to the battery door on the bottom of the unit. Open the pocket to locate the switch. Turn switch to the “Off” position during long periods of inactivity.

Lullabies/Nature Sounds/Gentle Vibration:
To choose one of the five Lullabies or three Nature Sounds, press the corresponding button to begin cycling through the options. Once you make a decision, the sound will play the selected amount of time for before shutting off automatically. You can turn off the Lullabies/Nature Sounds/Gentle Vibration

Volume:
Adjust the sound level with the volume button (Volume levels 1-5) on each unit.

TO CHANGE BATTERIES:

• Step 1:
  Open pocket on bottom of unit.

• Step 2:
  Use a Phillips head screwdriver to loosen battery door screw. Open battery door. Remove old batteries and dispose of them safely.

• Step 3:
  Insert 3 new “AA” batteries, making sure that the”+ and _” are facing the correct way. The battery compartment is marked for clarity.

• Step 4:
  Screw battery door back onto unit. Make sure the On/Off Switch is in one of the three “On/Timer” positions and secure pocket.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

D.C. 20402.
this equipment under Federal Communications Commissions rules.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>