UWANT B100-E Multifunctional Spot Cleaner User Manual

UWANT B100-E Multifunctional Spot Cleaner User Manual

Preface

Dear users,
We appreciate for your use of our Multiple Spot Cleaner. This manual is designed for B100-E, and the content herein is provid- ed to users for use and maintenance purpose. For matters not covered, please consult our customer service department

Precaution

Please read all safety precautions before use. Install the machine by following all the contents and steps provided in this Manual. Any operation that is inconsistent with the instructions may result in damage to the product or serious personal injury. This product is only suitable for household use, but not for industrial or outdoor use. When using electrical equipment,follow the basic precautions as follows:

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Never immerse the product in water or liquid;
• Never touch the plug or any live insulation parts with wet fingers to avoid the electrid shock;
• The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped.
• Keep the long hair, loose clothing, fingers and other parts of the body away from the airflow channels and moving parts of the product. Never aim the suction nozzle and the accessory brush head at the eyes. ears or put them in the mouth;
• Never insert metal particles, pins, iron wires, etc. into the gaps of the product to prevent electric shock and injury;
• The product should only be disassembled, repaired, or modified by the professionals;
• Unplug the product when it is not in use to avoid electric leakage, fire, or malfunction;
• In case of any product abnormalities found during use, cut off the power immediately and call us for after-sales treatment;
• Be sure to clean the sewage bucket in time after use to keep the ventilation path unobstructed, as it will result in reduced suction and motor heating, which will affect the product service life;
• The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
• Be sure to store the machine in a dry place after use. Never fill the clean water tank with water, as this will affect the service life of the machine;
• The product is designed for partial cleaning of fabric household products, i.e. sofas, mattresses, carpets, etc. It may be less effective for others;
• The cleaning agent supplied or specified by us may be required to be added during use. Add it in a specified proportion so as to prevent producing excessive foam, which may penetrate into the motor and reduce the service life;
• Never shake the machine when it is running to prevent sewage from entering the motor;
• It is normal in test if there is little water remaining in the machine.
• The technology and data covered in this manual are acquired by our company or a designated third-party testing agency. We reserve the final interpretation night.

Product Introduction

Packing details

Multiple Spot Cleaner| Small brush head| Accessory holder| 250mImeasuringcup| Storage bag| Manual| Hose assembly
---|---|---|---|---|---|---
1| 1| 1| 1| 1| 1| 1

Components

Note: The figures in the manual are for reference only. The physical product in packaging box shall prevail.

1. Main unit
   
   

2. Small brush head
   
   

3. **Accessory holder

**

4. **Hose assembly

**

5. Display
   

Note:

• It is recommended to clean local stains on mattresses and sofas with smallbrush head;
• The mode LED is a red and blue two-color light, of which RED is for highpower, and BLUE is for low power.

Installation and Use

Installation

1. Insert the hose coupler into the machine as per the figure, and drag it in the reverse direction without tripping after hearing a click sound.

2. Connect the brush head to the other hose end, and drag it in the reverse direc- tion without tripping after hearing a click sound.

Installation and disassembly of the clean water tank

1. Hold the clasp, and remove the clean water tank from the main unit.

2. Remove the plug of the clean water tank, and inject clean water (below 50°C) to the water level. Please use the cleaning clean water at a proportion of 1:30. Increase the proportion appropriately if the stub- born stains are of large coverage. It is recommend- ed to add different cleaning solution for different appli- cations, but those not des- ignated shall not be used. Fill the water tank with water and cleaning solu- tion, and stuff up the plug tightly to ensure no leak- age.

3. The installation of the tank is succeeded after hearing a click sound.
   

Start machine

1. Confirm that the clean water tank and sewage tank have been properly installed by noting if there’s water in tank, and if the hose brush head has been connected.
   

2. Pull out the power cord,insert the plug into the socket, the power LED is then on.

3. After the machine is pow- ered on, press the ON/OFF and you’ll hear the sound of the motor running.It is defaulted as low gear upon starting.

4. To switch the mode, please click the Cleaning mode button to switch between high and low gears.

5. When using the brush head (as shown in figure), close the flat surface to the object to be cleaned, press and hold the Outlet button to wet the parts for repeated washing. Release this button when no water spraying is required.

Cleaning and Maintenance

Self-cleaning

1. There must be some clean water in the clean water tank. Press the auto clean button as shown in the figure for at least 30 to clean the brush head and hose.
   

2. During the auto clean oper- ation, the brush head is put on the ground horizontally to block the suction port, which facilitates the auto clean.

3. Push hard in the direction indicated by the arrow to remove the visible window of the brush head.

4. For any stains remaining in the transparent cover of the brush head, remove the cover and clean it under the faucet.

5. Dry the transparent cover after cleaning and fit it in the brush head (install the bottom of the window and then rotate it in the direction shown in the figure).
   

6. Please screw off the bottom cover regularly to clean the sponge. Install it to the des- ignated place after making it dry in the air.
   

Cleaning of sewage tank

Notes:

• Be sure to tighten the cover to prevent sewage from seeping outduring use.
• Unplug the power cord before main unit cleaning to stop the machine. Then, wipe the machine with a dry cloth or a slightly damp cloth.

1. After using, pull the hand clasp of the sewage tank and take it out. Try to keep it as horizontal as possible to prevent the sewage from spilling out.

2. Put the sewage tank into the sink, remove the plug of the tank and pour out the sewage.

3. If the dirt in the sewage tank cannot be cleaned, remove the cover as shown in the figure, take out the float, and rinse it with running water.

4. Dry it after rinsing with water, then fit the float assembly and tighten the cover.
   

Storage & Placement

Note: It is recommended to disassemble the accessories,put them into the accesso- ry bag and store in a ventilated and dry place if the machine will not be used for a long time.

1. Install the accessory holder as shown in the figure, shake it properly after installation, and pull it backwards.

2. Press the Wind Up button after use to store the power cord properly, as shown in figure.

3. Wrap the hose, put the brush head in the position as shown in the figure,and store it in a ventilated and dry place.

Troubleshooting

the tank
Clogged pipe orifice| Check the pipe orifice and clean it
The machine has been used for a long time| Please power off to cool down for 10min before use
No water from the nozzle| Water shortage in tank| Please fill water
Clogged inlet| Please send it for maintenance
Outlet button is not pressed| Press the Outlet button
Water leakage at pipe orifice| Lack of water seal| Please send it for maintenance
Leakage of tank| Lack of water seal| Please send it for maintenance
Others| | Please send it for maintenance

Schematic Circuit Diagram

Product Parameters

Model| Power supply rating| Rated power| Volume of clean water tank| Volume of sewage tank
---|---|---|---|---
B100-E| 220V-50Hz| 450W| 1.8L| 1.6L

Name and Contents of Harmful Substances

The sheet was prepared as per the provisions of SJ/11364:
O: Means the contents of the hamful substances in all homoge- neous materials of the part are below the limit specified in GB/T26572.
x: means the contents of the harmful substances in at least one of the homogeneous materials of the part exceed the limit speci- fied in GB/T26572.
Remarks:For the parts marked with “X” above, the contents of harmful substances in some of them are beyond the limit due to the curent technical restrictions of the industry and cannot be replaced or reduced temporarily.

Mark for the restricted use of harmful substances| Environment-friendly use period (10 years): means the term within which harmful substances contained in the product will not leak or mutate and the user’s normal use of the product as per the operating manual will not cause serious environmental pollution or serious personal injury and property loss;
Arrow recycling mark: means this product can be recycled. Do not discard the product exceeding the use period or failing to work normally after repairing but submit it to the regular recycling channels and the qualified agencies for the treatment of waste electrical and electronic products.
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>