sygonix SY-4849288 Portable Safety Box User Manual
- June 4, 2024
- Sygonix
Table of Contents
sygonix SY-4849288 Portable Safety Box
Intended use
The product is a portable safety box with a combination lock. Contact with moisture must be avoided to prevent corrosion. If you use the product for purposes other than those described, the product may be damaged. Improper use can result in hazards. The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product. Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions. All company names and product names are trademarks of their respective owners. All rights reserved.
Delivery contents
- Product
- Steel cable
- 2x Dowels
- 2x Screws
- Operating instructions
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important information in this document. Always read this information carefully.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Operating environment
- Do not place the product under any mechanical stress.
- Protect the product from high humidity and moisture.
Operation
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
Operation
Important:
- The unlock code should be changed from the factory default “000” as soon as possible.
- When entering the unlock combination, cover the numbers with your hand or body to prevent others from seeing the code.
Locking and unlocking
Use the number dials and the knob to lock and unlock the door.
Locking
- Close the door.
- Turn the knob to lock the door.
- Scramble the numbers.
Unlocking
- Set the numbers to the correct unlock code. Make sure the numbers are lined up correctly.
- Turn the knob to open the door.
Changing the unlock combination
- Open the door.
- Leave the number dials at the unlock combination.
- Move the switch from position A to B (see figure).
- Set the number dials to a new unlock combination.
- With the door still open, turn the knob to the locked position.
- Move the switch from position B to A (see figure) to activate the new combination.
You have changed the number lock combination.
Installation
Mounting
WARNING
Concealed wires. Risk of deadly electric shock when drilling.
- Check for concealed wires before drilling.
PRECONDITIONS:
The mounting surface must be suitable, solid and level.
- Use the mounting holes on the back of the product as a template to mark where to drill.
- Drill holes on the marked positions.
- Mount the product using suitable dowels and screws.
Protection from theft
You can protect the product from theft by attaching the steel cable to it.
- Open the lid.
- Loop the cable around a secured object.
- Hook the end of the cable (near the stud) into the notch in the case.
When you lock the lid, the product is protected from theft.
Cleaning and care
Important:
- Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
- Do not immerse the product in water.
Technical data
- Material………………………………………….. Steel
- Dimensions (W x H x D) (approx.) …….. 165 x 245 x 55 mm
- Weight (approx.) …………………………….. 1200 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing. Copyright by Conrad Electronic SE. *2424644_V1_0921_jh_mh_en I1/O1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>