LEDEEZ 2AANZSDIY Sound Reactive Diy Light Strip User Manual

2AANZSDIY Sound Reactive Diy Light Strip
User Manual

2AANZSDIY Sound Reactive Diy Light Strip

Thank you for purchasing the LEDeez™ USB Powered Sound Activated DIY LED strips Piease read a instructions carefully before Using and retaln this manual for future reference. You can also connect to “Flexy-Smart App Unlock more functional modes (color
mode. dynamic mode, Music mode, etc).
READ & FOLLOW ALL SAFETY INSTRUCTIONS FIRST:

• This product is o be used with the recommended power adapter.
• Keep away from sharp objects or strong corrosive chemicals.
• Although this product has good bending properties, When bending the neon strip, try not to fasten t0o tightly or bend too much to avold damage.
• Do ot install neon strps near any heat sources
• Do not let chidden install neon strips alone. Avoid installing neon strips near potentials Hazardous sources (eq candles. liquic filled objects),
• Unfold the neon strip before shaping and powering on

PRODUCT SPECS

Bluetooth Version: V5.0
Power supply: DCSV UsB
LED type: 5050RCBIC
Number of LEDS: 72 lights/meter
Control method: Application
Length: 07T
FCCID: 2AANZSDIY
BT ID: D0G3626.

INSTALLATION STEPS

1. Wipe the location to be installed with a clean cloth Make sure the wall surface is dry and free of debris
2. Place the included mounting buckles on the wall n desired position and secure with screws . use adhesive sticker as a alterative option for hanging )
3. Press the lightstrip into the mounting buckles and connect the power end to your power source (DCSV USB-A port)
4. Install the app (see next page) and begin usage.

USING THE APP

• Download and install the ‘Flexy-Smart’ App
• Scan the QR Code to download the APP or search for “Flexy-Smart’ on Google Play or APP store to download ithttp://www.easytrack.net.cn/download_Mgc/274BOJIA
• This APP supports Android 43 abode/loss 8.0 above.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, Including Interference that may cause undesired operation.

‘Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, f not installed and used in accordance with the instructions, may  cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures-

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment Into an outlet on a circult different from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help

DGL Group guarantees the quit of has product,
Forquestions or comments, please fee reef confact us
via employ support@dglusa.com
Distributed by DGL Group, L1D.
2045 Lincoln Hwy. 3d Floor, Edison, NJ, 08317, USA.
www.dgiusa.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>