LEDEEZ 2 Packs Multicolor Smart Bulbs User Manual

LEDEEZ 2 Packs Multicolor Smart Bulbs

Introduction

Thank you for purchasing the LEDEEZTM Smart Color Changing Light Bulb via Bluetooth® and app. Please read al l instructions carefully before using and retain this manual for future reference.

SAFETY INSTRUCTIONS

• Keep the unit away from heat sources, direct sun light. humidity, water and any other liquids.
• Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Do not puncture or harm the exterior surface of the product in anyway.
• Keep t he unit free from dust. lint. etc.
• Do not use this unit for anything other than its intended use or purpose.
• Doing so may damage the device.
• This product is not a toy. Keep out of reach of children.
• CAUTION: Risk of Electrical Shock – Use in Dry Locations Only.
• This device is not intended for use with emergency exit fixtures or emergency exit lights.

PRODUCT SPECS,

Power:9W
Vol tage, 120V
Lumen, 800LM
Lifespan: >7S000H
Frequency: 60Hz
Color Temp: S000K + RGB
Control Method, App
BT ID , D0S8376
FCC ID, 2AANZSWBU

CARE AND MAINTENANCE

• Do not expose the bulb to liquid, moisture, or humidity to avoid damage to the product’s internal circuitry.
• Do not use abrasive cleaning solvents to clean the unit.
• Do not expose the bulb to extremely high or low temperatures as this will shorten the life of the electronic device and/or distort certain plastic parts.
• Do not dispose of the bulb in fire as they may explode or combust.
• Do not expose the bulb to contact with sharp objects as this w ill cause scratches and damage.
• Do not let the bulb fall from high places, as doing so may damage the internal circuitry.
• Do not attempt to disassemble the bulb.
  In the event that the bulb does not function properly, return it to the store where it was purchased.

DOWNLOAD & INSTALL THE APP

Scan the QR code below or search ‘Tuya· or ·smart Life” in the Apple App store or Google Play

LOGIN

1. Select your country, then log in with your email and top “GET to receive a verification code. Enter your verification then tap “LOGIN”
2. Or sign in via social media account

ADD A DEVICE:

1. Turn on your phone’s Bluetooth
2. Turn on lightbulb. device w ill flash after 3-5sec. If your device does no flash automatically turn it off and on 3x to prefrom a device reset
3. When bulb is blinking open selected app and a pop-up will appear tap “find the device· and click Add to add your device to the list
4. If pop-up does not appear automatically tap the ·+· button in the upper right corner of the app home page. then tap “add a device· and select “Light source Bluetooth”
   

CONTROL YOUR DEVICE

After the device has been connected successfully, find the device at the bottom of to enter the smart light control panel.
There are 8 light modes to choose from

1. White light Mode: Dimmable brightness and temperature controls of white light 5000K
2. Color Mode, Change the color and brightness of bulb
3. Scene mode: Eight scene modes to choose from
4. Music Sync Mode: Select “Music Rhythm· and the bulb will automatically sync with the rhythm of your music
5. Time Set Mode: Set the timer for automatic On/Off
6. Group Control Mode: Multiple bulbs can be grouped together to be controlled by the same switch.
   (see below for how to set up a group)
   

CREATE A GROUP

1. Click the light bulb device
2. Click the setting dots in the upper right corner
3. Click create a group·
4. Click the ·+· to add a device
5. Create a group name and cl ick ·save·
6. Now that your group has been created you can control multiple bulbs at the same time

Note:

• The bulb must be within 100ft (30ml of the device for a reliable bluetooth connection in the open space
• The time set function can be performed in group mode
• To reset the bulb perform the ·on-off-on-off-on· action. If the bulb begins blinking quickly the reset was successful. if the bulb does not blink repeat the process

FCC Statement

This device complies with part 75 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation.

Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL

Note: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 75 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a res identical installation. This equipment generates, uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

DGL Group guarantees the quality of this product. For questions or comments, please feel free to contact us via email at support@dglusa.com.
Model, LE-SWBU-2PK-MLT
Ref 20230118EL MFG Date, 01.23

Customer Service

DGL Group guarantees the quality of this product.
For questions or comments, please feel free to contact us
via email at support@dglusa.com
Distributed by DGL Group, LTD.
2045 Lincoln Highway, Edison, NJ, 08817, USA.
www.dglusa.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>