LEDEEZ SDIY Sound Reactive Diy Light Strip User Manual
- June 12, 2024
- LEDeez
Table of Contents
SDIY Sound Reactive Diy Light Strip
User Manual
SDIY Sound Reactive Diy Light Strip
Thank you for purchasing the LEDeeZ.TM USB Powered Sound Activated DIY LED strips. Please read all instructions carefully before using and retain this manual for future reference. You can also connect to “Flexy-Smart-App Unlock more functional modes (color mode, dynamic mode. Music mode, etc.).
READ & FOLLOW ALL SAFETY INSTRUCTIONS FIRST:
- This product is to be used with the recommended power adapter.
- Keep away from sharp objects or strong corrosive chemicals.
- Although this product has good bending properties, When bending the neon strip, try not to fasten too tightly or bend too much to avoid damage.
- Do not install neon strips near any heat sources.
- Do not let children install neon strips alone. Avoid installing neon strips near potentials Hazardous sources (eg candles, liquid-filled objects)
- Unfold the neon strip before shaping and powering on
PRODUCT SPECS:
Bluetooth° Version: V5.0
Power supply: DCSV USB LED
type: 505ORGBIC
Number of LEDs: 72 lights/meter
Control method: Application Length: 10FT
FCC ID: 2AANZSDIY
BT ID: D063826
INSTALLATION STEPS:
- Wipe the location to be installed with a clean cloth Make sure the wall surface is dry and free of debris.
- Place the included mounting buckles on the wall in desired position and secure with screws . ( use adhesive sticker as a alternative option for hanging ).
- Press the light strip Into the mounting buckles and connect the power end to your power source (DCSV USB-A port)
- Install the app (see next page) and begin usage.
USING THE APP:
- Download and install the ‘Flexy-Smart’App
http://www.easytrack.net.cn/download_Mgc/274BOJIA - Scan the QR-Code to download the APP or search for ‘Flexy-Smart’on Google Play or APP store to download it.
- This APP supports Android 4.3 above/10S 8.0 above.
FCC RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set for the for an
uncontrolled environment.
This equipment shall be installed and operated with minimum distance 20cm
between the radiator & body.
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/N technician for help
DGL Group guarantees the quality of this product.
For questions or comments, please feel free to contact us via email at
support@dglusa.com
Distributed by DGL Group, LTD.
2045 Lincoln Hwy. 3rd Floor, Edison, NJ, 08817, USA.
www.dglusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>