ANKER 10411PL PowerLab 10W Wireless Charger Instruction Manual
- June 12, 2024
- Anker
Table of Contents
Instruction Manual
Power Lab 10W Wireless Charger
with 4ft micro USB Cable
Model No.: 10411PL
Package Contents:
- Qi Wireless Charging Pad X 1
- User Manual X 1
Optional Accessory:
1. 4ft micro USB Cable
How to Use:
Step 1: Plug the cable in to the Qi wireless charging pad.
Step 2: Plug the USB connector into the USB power adapter.
Step 3: Plug the AC power adapter in to the corresponding power socket
Step 4: Simply place the Qi device on top of the pad for wireless charge
Slim Case (Within 4mm)
Thickness Is Over 4mm Eg:Otter Box
Magnetic Pad On Phone Back
Metal Ring Case
Centrally Placed
Crookedly Placed
Don’t Put Metal Foreign Object On The Pad
LED Indicator:
- Blue LED light ON: Wireless charging
- Blue LED off: Full Charged
- Blue LED Flicker: Low voltage
- Red LED always ON: Abnormal working
- Red LED Flicker: Detection of foreign body
Specifications:
Fast Charge
Qi Wireless Charging Pad
Input: 9V 1.75A, 5V/1.65A
Charging Mode: Samsung 10W / iPhone 7.5W / Qi 5W
Dimensions: ø90*7mm
Weight: 70 ±3 g
QC3.0 Adapter
Input: 100-240V,50/60Hz,0.8A
Output: 5V/3A , 9V/2A, 12V/1.5A
Caution:
- Please use our standard QC 2.0 / QC3.0 AC adapter for power input, if you used an un-normal AC adapter, it may cause the charging pad work un-properly.
- We strong recommend to use a branded AC adapter while charging.
- Please do not attempt to disassemble this product, it may result in short-circuit or even damage.
- The product should be kept in dry and ventilated environment, do not store in an area of high humidity and high temperature.
- Please do not use organic solvent to clean product surface.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)this device may not cause harmful interference, and(2)this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>