VISSANI AC120-19AR Air Cooler User Guide

June 12, 2024
VISSANI

VISSANI AC120-19AR Air Cooler User Guide
Air Cooler

Safety Information

  • This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fitin a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
  • Do not leave the fan running unattended.
  • Keep electrical appliances out of reach from children or infirmpersons. Do not let them use the appliances without supervision.
  • If the supply cord is damaged, it must be replaced by manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. luding children) es, or lack of experi-
  • This appliance is not intended for use by person: with reduced physical, sensory or mental cap: ence and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Young children should be supervised to ensure that they do not play with the appliance.
  • Unplug fan before cleaning.
  • The rotor guard shall not be dissembled/opened to clean the rotor blades.
  • Wipe the fan enclosure and rotor blade guard with a slightly damp cloth.

CAUTION: Read rules for safe operation and instructions carefully.
WARNING: To reduce the risk of fire of electric shock, do not use this fan with any solid-state speed control device.

Rules for Safe Operation

  • Never insert fingers, pencils, or any other object through the grill when fan is running.
  • Disconnect fan when moving from one location to another.
  • Be sure fan is on a stable surface when operating to avoid overtuming.
  • DO NOT use fan in window; rain may create electrical hazard.
  • Household use only.

Pre-installation

NOTE : The pictures contained in the manual are for reference only.

PACKAGE CONTENTS
Product Instruction

Part Description Quantity
A Control panel 1
B Cord wrap 1
C Wetted pad 1
D Ice crystal box 2
E Water tank 1

Operation

WARNING:

  • Please drain the water collected at the bottom of the water tank when the machine is idle.
  • When adding water and cleaning, the power plug should be unplugged.
  • Before starting the machine, be sure that the pump module is fixed in placn. If the pump module is placed at random, the product may operate abnormally.
  • There are two water adding ways:
    • The half of the water in the water tank should be pumped out, the water pump module should not be disassembled, and the water should be directly added.
    • The water pump module should be separated, the water in the water tank should be pumped out completely, and then the water should be added or the water tank should be cleaned.
  1. Opening the water tank

    • Flip the water tank latch up from vertical to horizontal osition.
      Opening Water Tank
  2. Pull out water tank

    • Full the water tank (E) out halfway from the bottom of the machine.
      Pull Out Water Tank
  3. Removing the water tank

    • The water tank should be separated from pump module (including water tube) by turning the knob with a hand (90 degrees counterclockwise).
      Remove Water Tank
  4. dding water or cleaning the water tank

    • After the water tank is slowly pulled out, you can add the water or clean the water tank.
      Adding Water
  5. Closing the water tank

    • Flip the water tank latch down from horizontal back to vertical position.
      Closing Water Tank
  6. Using the Ice Crystal Box

    • The ice crystal box (D) can be repeatedly frozen and reused.
    • To prevent damage, the ice crystal box (D) cover must not be opened.
    • The ice crystal box material is environmentally friendly, non-toxic and harmless. It can be safely placed in the refrigerator for freezing.
    • The frozen ice crystal box should be used in the water tank, and after the unit is tumed on, the temperature at the air outlet will be lowered.
    • The ice crystal box can be replaced by ice, which also has a cooling effect.
    • When adding water, the water level of the water tank should not exceed the “MAX” (maximum) level. If the water level is lower than the “MIN” (minimum) level, please add water.
      Ice Crystal Box
  7. Opening the water tank

    • To use the ice crystal box, pull the water tank (E) out halfway from the bottom of the machine.
  8. Preparing the ice crystal box

    • Remove the ice crystal box from the package and put it in the refrigerator for more than 3 hours.
    • Place the frozen ice crystal box (D) in the water tank (E) and add water not exceeding the “MAX” (maximum) amount indicated on the scale.
      Preparing Ice Crystal Box

Machine Body

Control Panel
Control Panel

Display panel
Display panel

Button Function description
Power on or off.
O Touch the swing button to start or stop oscillation
Press to start or stop humidification. In the dry or hot weather, start the

humidification function to have a better experience.
| Two fan modes available: Normal (level 3, nomal fan indicator lightis lit up), or Natural (level 2, natural fan indicator light is lit up)
+/-| Press + or — to set the fan speed or timing time Note: When timing/reservation, press this key, the time will be reduced/in- creased by 0.5 hours every time for 0-3 hours, and 1 hour for 3-10 hours. When adjusting the fan speed, short press this key to increase or decrease fan speed by 1 level every time
| To set the timer, turn the power on, press the timer button, and then the display flashes 3 times, indicating the timing is completed In the standby state, press this key, the display will flash. Set the time, and then the display flashes 6 times, indicating the setting is completed After pressing this key, the swing function and fan speeds can be set at the same time O Cancel timed operation Cancel timing when the unitis off : when timing has been set, press the timing button (the pattern on the screen willflicker at this time), and then long press the timing button for 2 to 6 seconds to cancel timing Cancel timing when the unitis on: when timing has been set, press the timing button (the pattern on the screen willflicker at this time), and press the timing button 2 seconds again immediately to cancel timing

Remote Control

Note:

  • The remote controller can be used normally within 16.4 ft (5 m) and 30 degrees of the deviation angle in front of the product.
  • The battery contains many heavy metals, acid-base and other materials, being a threat to human health. The used and old batteries should be recovered.
  • Use manganese or alkaline batteries of type AAA. Do not use rechargeable batteries.

WARNING:

  • Do not mix old and new batteries.
  • Do not mix battery types:
    • alkaline,
    • standard (carbon-zinc), or
    • rechargeable (ni-cad, nimh, etc)

Remote Control
Battery

Care and Cleaning ‘

  • Be sure to unplug from the electrical supply source before cleaning.
  • Plastic parts should be cleaned with mild soap and a damp cloth or sponge. Thoroughly remove soap film with clean water.
  • Be sure not to let water or other liquid enter inside of appliance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals