ICE iB1500 Floor Burnisher User Manual

: June 12, 2024
: ICE

Table of Contents

ICE iB1500 Floor Burnisher
Product Information
Product Usage Instructions
SAFETY PRECAUTIONS
MACHINE COMPONENTS
OPERATION OF HIGH-SPEED FLOOR MACHINE
MAINTENANCE
PARTLIST
SPECIFICATIONS
Wiring Diagram
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ICE iB1500 Floor Burnisher

ICE-iB1500-Floor-Burnisher-PRO

Product Information

Product Name: iB1500 Floor Burnisher
Manufacturer: International Cleaning Equipment
Model Number: iB1500
Serial Number: [serial number]
Machine Options: [machine options]
Sales Rep: [sales rep]
Sales Rep Phone Number: [sales rep phone number]
Customer ID Number: [customer ID number]
Installation Date: [installation date]

Specifications and parts are subject to change without notice.

Product Usage Instructions

Carefully read and understand the operator manual before operating the machine.
Ensure the machine is grounded while in use to protect the operator from electric shock. The machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded.
Do not remove the ground pin under any circumstances.
The machine is intended for commercial use and is constructed for use in an indoor environment. Use only recommended accessories.
Do not operate the machine if you do not understand the operator’s manual.
If any debris such as cigarettes, matches, or hot ashes are present, do not operate the machine.
Before leaving or servicing the machine, replace the power cord immediately if any damage is detected. The replacement must be performed only by an authorized person or by the customer service center.

READ OPERATOR MANUAL CAREFULLY

IMPORTANT: To ensure full warranty protection,Please fill out & return your warranty card.

Please fill out at time of installation for future reference.

Model No.__
Serial No.__
Machine Options__
Sales Rep.__
Sales Rep. phone no.__
Customer ID Number__
Installation Date__

HOW TO ORDER PARTS
Only use ICE Company supplied or equivalent parts. Parts and supplies may be ordered online,by phone, by fax or by mail.

Identify the machine model.
Identify the machine serial number from the data label.
Ensure the proper serial number is used from the parts list.
Identify the part number and quantity. Do not order by page or reference numbers.
Provide your name, company name, customer ID number,billing and shipping address, phone number and purchase order number.

PROTECT THE ENVIRONMENT
Please dispose of packaging materials,old machine components such as batteries, hazardous fluids, including antifreeze and oil, in an environmentally safe way according to local waste disposal regulations. Always remember to recycle.

International Cleaning Equipment
XiangShi Road LiaoBu DongGuan GuangDong China
Tel: 0769-8186 9000
Fax: 0769-8186 3000
Specifications and parts are subject to change without notice.

SAFETY PRECAUTIONS

Carefully read and understand this manual before operating this machine. This machine must be grounded! This floor/finishing machine shall be grounded while in use to protect the operator from electric shock.Grounding provides a path of least resistance for electric current. This machine is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not remove the ground pin under any circumstances. This machine is for use on a nominal 120-volt circuit and has a grounding plug that resembles the plug illustrated in Figure. Make sure that the machine is connected to an outlet having the same configuration as the plug. No adapter should be used with this machine.

This machine is intended for commercial use. It is constructed for use in an indoor environment
and is nor intended for any other use. Use only recommended accessories.

Do not operate machine:
- Unless trained and authorized.
- Unless you have read and
- In flammable or explosive areas. understand the operators manual.
- With a damaged cord or plug.
- With the use of extension cords.
- If not in proper operating condition.
- In outdoor areas and standing water.
Before operating machine:
- Make sure all safety devices are in place and operating properly.
When using machine:
- Only use approved burnishing pads.
- Do not run machine over cord.
- Do not pull machine by cord or plug.
- Do not pull cord around sharp
- Do not stretch cord. edges or corner.
- Do not unplug by pulling on the cord.
- Do not handle plug with wet hands.
- Turn power switch to “off “ prior to – Keep cord away from heated surfaces. unplugging machine.
- Do not pick up burning or smoking
- Report machine damage or faulty debris such as cigarettes, matches operation immediately. or hot ashes.
Before leaving or servicing machine:
- Turn off machine.
- Unplug cord from outlet.
When servicing machine:
- Unplug cord from outlet.
- Use manufacturer-supplied or approved replacement parts.

To avoid electrical shock,please replace the power cord immediately if any damage is being detected. The replacement must be performed only by an authorized person or by our customer service center.

MACHINE COMPONENTS

$ICE-iB1500-Floor-Burnisher- $2$$

Machine Description

New structure design
20″ Housing
20″ Pad brush
Engnieering plastics
Drive belt
Handle foldable structure
Safety lock-out switch
Security protection in an upright
Use twist spring adjustment pad pressure
50′ Cord

Machine Structure

Housing
Wheel
Foldable handle
Safety lock-out switch
Trigger
Leveling rod
Handle
Motor
Twist spring
Lock washer
Pad holder

OPERATION OF HIGH-SPEED FLOOR MACHINE

THIS IS A SPECIALIZED MACHINE THAT REQUIRES THE OPERATOR TO UTILIZE A ICE APPROVED PAD, AND MUST BE ADJUSTED PROPERLY TO ENSURE THE HIGHEST POSSIBLE PERFORMANCE AND PRODUCTIVITY.
Read operators manual thoroughly prior to operating or servicing this machine.

General Use:

Remove any obstructions or other obstacles in the area which is to be cleaned.
Place handle in upright position and tilt machine back until handle rests on the floor.
Remove the pad center gripping device by unscrewing the thumbscrews.
Place a “ICE approved” burnishing pad on the pad driver and re-attach the center gripping device. (check with your ICE distributor for approved pads)
Place machine back into its upright position.
Plug power cord into grounded outlet.
Adjust the handle (switch housing) height to a comfortable operating position.
To start the machine, push on the Blue safety button of the top of upper switch housing and squeeze either of the switch levers.
When the machine is in operation, both hands should be placed on the handle (switch housing).
When the machine is in operating, both hands should be gripping the hand.
To stop the machine at any time, simply release the switch lever, and the machine will stop automatically.

MAINTENANCE

To keep the machine performing well for many years, please follow the following maintenance procedures.
Always confirm that the machine is unplugged prior to performing any maintenance or repairs.

Unplug machine as soon as you are done using it.
Clean the outside of the machine with a mild cleaner.
Check power cord for any damage. If any damage is detected, replace the cord immediately.
Lubricate wheels with a water resistant lubricant once a month.
Check machine for loose or missing nuts and bolts, and replace as necessary.
If the machine is used in a dusty environment, you may remove the motor cover and blow the motor clean with compressed air. This will allow for good ventilation and help the motor run cooler.

STORAGE

Unplug machine from power source and wrap cord on handle.
Store in upright position in a dry area.

PARTLIST

iB1500 HANDLE ASSEMBLY

$ICE-iB1500-Floor-Burnisher- $3$$

DIA NO	PART NUMBER	DESCRIPTION	NO REQ’D
1	5020112	INSERT	1
2	4010208	SPRING LEVELING	1
3	5020120	ROD LEVELING	1
4	5020109	TUBING BOTTOM BRACKET	1
5	1647845	PIN	1
6	5011019	TUBING BOTTON BASE	1
7	4010405	HOOK CABLE	1
8	1511540	SCREW M5 X 40 HEX SOCKET	2
9	1434500	TOOTH WASHER Φ5	4
10	1211512	SCREW M5X12	4
11	1434400	TOOTH WASHER Φ4	2
12	1221412	SCREW M4X12	1
13	5011017	LEVELING ROD	1
14	4010314	PIN	3
15	5011004	COVER	1
16	4010320	CORD POWER SUPPLY	1
17	4020310	STRAIN RELIEF CORD	1
18	1421616	WASHER PLAIN Ø6	4
19	1512635	SCREW M6 X 35	2
20	5015017	SERIAL NUMBER	1
21	1512625	SCREW M6 X 25	2
22	4010312	REAR COVER	1
23	5013009	CIRCUIT BREAKER 20A	1
24	4010333	SPRING SAFETY	1
25	4010317	BALL BASE	1
26	1211408	SCREW M4X8	2
27	4010330	LEFT TRIGGER SWITCH	1
28	4010331	RIGHT TRIGGER SWITCH	1
29	1211325	SCREW M3X25	2
30	4010323	SPRING SWITCH	1
31	1434300	TOOTH WASHER	2
32	4010308	SWITCH	1
33	4010307	SAFETY BOTTOM	1
34	4010301	FRONT COVER	1
35	4010316	ICE LOGO	1
36	4010311	CLAMP CORE	1
DIA NO	PART NUMBER	DESCRIPTION	NO REQ’D
---	---	---	---
37	1221406	SCREW M4X6	2
38	1123608	NUT LOCK M6	1
39	1421612	WASHER Ø6	6
40	1113507	NUTLOCKM5	2
41	4010403	CLAMP HOOK	1
42	5020119	TUBING TOP BRACKET	1
43	4010215	CORD HANDLE	1
44	4010213	GROMMET	1
45	5011018	TUBING TOP BASE	1
46	1644045	PIN	1
47	1221620	SCREW M6X20	6
48	1422616	WASHER LOCK Φ6	6
49	6150712	WIRE CLIP	1
50	1535610	SCREW M6x10	1

iB1500 BASE ASSEMBLY

$ICE-iB1500-Floor-Burnisher- $4$$

DIA NO	PART NUMBER	DESCRIPTION	NO REQ’D
1	4010316	ICE LOGO	1
2	4010103	COVER TOP	1
3	1221512	SCREW M5X12 PH	3
4	4010102	COVER MOTOR	1
5	5012310	MOTOR 1.0KW 120v	1
5012310-1	CARBON BRUSH ASSEMBLY	1
6210423	RECTIFIER 50A/1000V	1
6	5020108	TWIST SPRING	1
7	5020117	TWIST SPRING COVER	1
8	5020200	HOUSING	1
9	5020113	POSITION PLATE	1
10	1421816	WASHER PLAIN Φ8× Φ16×1	2
11	1422821	WASHERLOCK Φ8	4
12	1021816	SCREW M8x16 HEX	2
13	5020106	SPACER	4
14	1421409	WASHER PLAIN Φ4× Φ9×0.8	4
15	1221410	SCREW M4x10 PH	4
16	5020107	SCREW ROD	2
17	5012407	REAR AXLE	1
18	5012408	SPACER WHEEL AXLE	2
19	4210115	WHEEL 6″	2
20	4010111	HEX SCREW M6x12.7	4
21	1421618	WASHER PLAIN Φ6.4×Φ18×1.6	4
22	1534608	SCREW M6x8	2
23	4210116	WHEEL 5″	2
24	1421625	WASHER PLAIN Φ12.5× Φ25×1.5	4
25	1436012	RETAINING RING EXTERNAL Φ12	4
26	5012426	FRONT AXLE	1
27	5012305	SPACER	1
28	5012308	DRIVING PULLEY	1
29	5012605	VEE BELT	1
30	5012205	KEY DRIVEN SHAFT	1
31	5012306	KEY MOTOR	1
32	5012303	WASHER PLAIN Φ8xΦ30×5	2
33	1021825	SCREW M8x25 HEX	1
34	5012111	HOUSING	1
DIA NO	PART NUMBER	DESCRIPTION	NO REQ’D
---	---	---	---
35	9060020	PAD HOLDER 20″	1
36	9000001	BIG MOUTH	1
37	1031830	SCREW M8x30 HEX	1
38	1521620	SCREW M6 x 20 HEX SOCKET	5
39	1422616	WASHER LOCK Φ6	5
40	1421612	WASHER PLAIN Φ6×Φ12×1.6	7
41	5012201	DRIVEN PULLEY	1
42	1612607	BEARING 6004LU TPI	2
43	5012203	DRIVEN SHAFT	1
44	5012204	SPACER BEARING	1
45	1437042	RETAINING RING INTERNAL Φ42	2
46	1111008	NUT M10	5
47	1021065	SCREW M10x65 HEX	1
48	1011016	SCREW M10x16 HEX	4
49	1123608	NUT LOCK M6	1
50	1111807	NUT M8	4
51	5012423	SCREW ROD M8	2
52	1031032	SCREW M10x32 HEX	4
53	5012202	MOUNTING PLATE DRIVEN SHAFT	1
54	1421020	WASHER PLAIN Φ10	16
55	1432026	WASHER LOCK Φ10	8
56	1124018	CAP NUT M10	4