SIEMENS SITRANS LC Continuous Level Measurement Radar Sensor User Guide

June 12, 2024
SIEMENS

SITRANS LC Continuous Level Measurement Radar Sensor

Product Information

The Siemens Level Measurement Guide provides comprehensive
information about level measurement technologies and their
applications. It highlights the importance of accurate and reliable
process instrumentation in the age of digitalization. Siemens
offers a complete range of level measurement devices backed by a
global support network.

Contents

  • Technology selector
  • Level controllers
  • Ultrasonics
  • Radar
  • Continuous contact
  • Point level
  • Hydrostatic
  • Level by weight
  • Remote monitoring and displays
  • Digitalization
  • Support

Product Usage Instructions

Technology Selector

Siemens offers a range of level measurement technologies to meet
different application needs. Start by selecting the right
technology for your specific requirements to ensure low cost of
ownership and increased safety.

Non-Contacting Technology: Ultrasonic and Radar

Consider non-contacting technology, such as SITRANS LU
(ultrasonic) and SITRANS LR (radar), for most level applications.
These technologies require minimal maintenance, have no wear and
tear, and are easiest to commission and install.

Contacting Technology: Pressure, Guided Wave Radar,

Capacitance, Weighing

For high accuracy dosing/batching applications, use SIWAREX
(weighing) technology. For safety, assurance, and point level
detection, install devices like Pointek CLS, SITRANS LCS050,
SITRANS LVL, SITRANS LVS, or SITRANS LPS. SITRANS LG (guided wave
radar), SITRANS P (pressure), and SITRANS LC (capacitance) are
suitable for these applications.

Control Technology: Pre-Programmable Control Features

For applications that require more than strictly level
measurements, consider technologies like SITRANS LUT400,
MULTIRANGER, and SITRANS LT500. These technologies offer
pre-programmable control features, datalogging, extra
inputs/outputs, and full communication capabilities.

Level Measurement Technologies

The Level Measurement Guide provides detailed information on the
following technologies:

  • Controllers
  • Ultrasonics
  • Radar
  • Continuous contact
  • Point level
  • Hydrostatic
  • Level by weight
  • Remote monitoring and displays
  • Digitalization
  • Support

Refer to the specific sections in the guide for detailed
information on each technology and its applications.

LEVEL MEASUREMENT GUIDE
Embrace the proven, welcome the new
siemens.com/level

CONNECT. CONTROL. SAVE
The front lines of digitalization

Enormous potential benefits await your operations with Industry 4.0. With unparalleled control and access, you now have complete knowledge of what’s happening in your plant at all times.

But even in the age of digital, you still need accurate, reliable, and rugged process instrumentation. Because if field instruments can’t supply the right data, even the most sophisticated digitalization plans will fail.
Intelligent level monitoring brings intelligent operations:
Connect devices to Siemens MindSphere Cloud for Industry and use SITRANS IQ apps to see your plant open up before you.
Commission, monitor, and diagnose operations with the touch of your smartphone through the SITRANS mobile IQ app.
Save operators’ time and eliminate inefficiencies through optimized processes, delivering cost savings directly to your bottom line.
With the knowledge that no single technology can address the needs of all industrial applications, Siemens provides a complete range of level measurement devices. All backed by our global support network, providing experienced sales and technical assistance when and where you need it.

2

Contents

Technology selector

5

Level controllers

8

Ultrasonics

10

Radar

12

Continuous contact

16

Point level

18

Hydrostatic

20

Level by weight

22

Remote monitoring and displays

26

Digitalization

28

Support

30

3

Because no single technology measures level in all applications, Siemens offers selection.

Start with the right product, finish with low cost of ownership and increased safety.

Non-contacting technology

Ultrasonic Radar

Always consider non-contacting technology first. SITRANS LU and SITRANS LR ultrasonic and radar technologies measure most level applications.

Minimal maintenance No wear and tear Easiest to commission and install

Contacting technology

Pressure Guided wave radar Capacitance Weighing

For high accuracy dosing/batching use SIWAREX (weighing). SITRANS LG (guided wave radar), SITRANS P (pressure), and SITRANS LC (capacitance) are the answer for the following:

Safety and assurance
For point level detection, safety of personnel, back-up control, and to avoid costly shutdowns, install point level devices like Pointek CLS, SITRANS LCS050, SITRANS LVL, SITRANS LVS or SITRANS LPS.

Small process connections
Interface detection Extreme pressure and temperature applications
Control
Pre-programmable control features, datalogging, extra inputs/outputs, full communication. For applications when you want more than strictly level measurements.

SITRANS LUT400

MULTIRANGER

SITRANS LT500

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 4

Ultrasonic Radar Guided wave radar R F Capacitance Gravimetric Hydrostatic pressure Vibration Capacitance Paddle Ultrasonic

Level technology selector
· preferred · condition dependent
Continuous level

Point level

Conditions

Measurement

Level

·

·

·

·

·

·

Interface (liquid/liquid)

·

·

·

Interface (liquid/solid)

·

·

Volume

·

·

·

·

·

·

Mass

·

·

Flow (open channel)

·

·

Level Application

Changing density

·

·

·

·

Changing dielectric

·

·

·

·

·

Aggressive chemicals*

·

·

·

·

·

·

Pressure/vacuum

·

·

·

·

·

High temperature

·

·

·

·

·

Cryogenic

·

·

·

Turbulence

·

·

·

·

·

·

Steam

·

·

·

·

·

Hydrocarbon vapors/ solvents

·

·

·

·

·

Foam

·

·

·

·

·

·

Buildup

·

·

·

·

·

·

High viscosity

·

·

·

·

·

·

Dust

·

·

·

·

·

Solids powders

·

·

·

·

·

Solids granules/pellets < 25 mm (1″)

·

·

·

·

·

Solids > 25 mm (1″)

·

·

·

  • Check chemical compatibility.

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

·

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 5

LEVEL MEASUREMENT
Because no single technology measures level in all applications, Siemens offers selection
Monitoring water levels in open channels. Tracking the amount of grain in a silo. Measuring oil in a tank. Simply put, level measurement tells you how much material is at a given location.
The right instrument for your application Siemens level measurement instruments let you get on with your day. Easy 4-button programming and graphical Quick Start Wizards deliver headache-free installation and setup. Advanced processing means that operators aren’t spending valuable time repeatedly troubleshooting devices–instead they can be confident that these instruments are delivering reliable, accurate results.

Complementing our level technology is Siemens’ complete suite of process instruments, gas analytics, automation, and drives for industries around the globe:

Flow Weighing Pressure Temperature Positioning Power supplies Process protection Process controllers Remote displays Process recorders

Gas analytics Gear reducers Motors Control systems Industrial communication PLCs HMIs Drives Motion control

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 6

SITRANS LR250
SITRANS SITRANS LVL200 LC300

SITRANS LU240

SITRANS LG250 ECHOMAX TRANSDUCER

POINTEK CLS200

MULTIRANGER

SITRANS P

POINTEK CLS300

SITRANS LR560

SITRANS CLS100

SITRANS LVS300

SITRANS LPS200

SIWAREX WP231

SIWAREX WL200

SITRANS LVS200
SIWAREX WL200

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 7

LEVEL CONTROLLERS
Ultimate control for your application

After leading the market in ultrasonic level controllers for the past 40 years, Siemens has evolved its industry-leading control solutions to include 80 GHz radar sensors.
siemens.com/controllers

Need high-accuracy open channel monitoring? How about flexible control with multiple relays and ultrasonic level? Or perhaps you need a reliable controller for long-range, high-frequency radar?
Siemens level controller portfolio answers all these questions–and more.
The new SITRANS LT500 level, flow, and pump controllers for radar transmitters–or any two-wire 4-20 mA devices–offers everything from basic level control to complex pumping routines. Easily retrofit older equipment with SITRANS LT500 and see how improved system control delivers savings directly to your company’s bottom line.

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 8

Technology Order No.
Range Key features
Communications or outputs Data logging Communication options High-accuracy flow Dual point pump control

SITRANS LUT400 High accuracy and data logging
Ultrasonic 7ML5050 SITRANS LUT400 are compact, single point, long range ultrasonic controllers for continuous level or volume measurement of liquids, slurries, and solids, and high accuracy monitoring of open channel flow. 0.3 to 30 m (1 to 98 ft), sensor dependent · Digital receiver for high performance
and reliability in noisy applications · Intuitive ease of use · Advanced pump, alarm, and flow
control features with three relays · Integrated datalogger · Real-time clock with daylight saving
time and energy-saving algorithms
· HART · USB: Integrated web browser for local
programming
·
·

MultiRanger200 / HydroRanger200
Differential measurement and six control relays
Ultrasonic
7ML5033 / 7ML5034
MultiRanger/HydroRanger are versatile short- to medium-range ultrasonic single and multi-vessel level monitor/ controllers for virtually any application in a wide range of industries.

SITRANS LT500
First choice for radar sensor measurement at 80 GHz
Ultrasonic, radar, 4-20 mA
7ML60
SITRANS LT500 is a controller for level, volume, volume flow, and pump applications for radar and ultrasonic transmitters ­ or any other 2-wire 4 to 20 mA devices.

0.3 to 15 m (1 to 49 ft), sensor dependent

Sensor dependent

· Range of models for simple level measurement or pump control to more complex for differential level, open channel measurement, advanced pump control, alarming, and gate control
· Auto False-Echo Suppression to avoid false echoes from fixed obstructions
· Intuitive ease of use · Six relays

· Single- and dual-point measurements · Quick Start Wizards with 6 different
display views and optional view information · Compatible with SITRANS LR110/120, SITRANS Probe LU240 and generic mA inputs · Six fully programmable relays rated at 5A for pump control and alarming · Datalogging, parameter backup and copy configuration on micro memory card

· RS-485 with Modbus RTU or ASCII · SmartLinx cards for PROFINET, Modbus
TCP/IP, Ethernet/IP, PROFIBUS DP, DeviceNet

HART, Modbus RTU, PROFIBUS DP or PROFIBUS PA options

·

·

·

·

·

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 9

ULTRASONICS
Active face technology keeps transmitters free of material buildup

Siemens non-contacting ultrasonic sensors and transmitters have active face technology which reduces material buildup and provides trouble-free, reliable performance. Both our transmitters and transducers (when combined with a Siemens controller) feature Process Intelligence, our field-proven echo processing algorithms, to guarantee the most reliable performance possible.
siemens.com/ultrasonics

SITRANS Probe LU240 transmitters are a great solution, where value and performance meet. These cost-effective, compact intelligent level transmitters give you the level, volume, and flow measurement you need with field-proven echo processing. For ultrasonic non-contacting point level detection, Pointek ULS200 is a reliable transmitter.
Siemens Echomax ultrasonic level transducers are impervious to buildup, moisture, vibrations, and flooding. With the ability to detect submergence ­ when paired with a submergence shield ­ these transducers are a perfect fit for a range of industrial applications. Siemens transducers are easy to install and require little to no maintenance. The unmatched beam angle ­ stronger pulse and sensitivity in a compact beam ­ make our transducers the most powerful in the industry.

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 10

SITRANS Probe LU240

Echomax transducers

Pointek ULS200

2-wire transmitter with HART 7 communications

Full range of options for all application needs

Point level detection

Order No.

7ML511

7ML1106, 7ML1100, 7ML1115, 7ML1118, 7ML1171 and 7ML1123

7ML1510

SITRANS Probe LU240 is a cost-effective, compact, intelligent level solution for liquid chemical inventory, monitoring small process vessels, and level monitoring measurement in the environmental industry.

· Echomax XRS-5: for flumes and weirs · Echomax ST-H: installation flexibility · Echomax XPS-10/15: liquids, solids and
slurries · Echomax XPS-30: deep wells and solids

Ultrasonic non-contacting switch with two switch points for level detection of bulk solids, liquids, and slurries; ideal for sticky materials.

Range

0.2 to 12 m (0.8 to 39 ft)

0.3 to 30 m (1 to 98 ft), model dependent · Liquids: 0.25 to 5 m (0.8 to 16 ft) · Solids: 0.25 to 3 m (0.8 to 10 ft)

Process temperature

-40 to 80 °C (-40 to 176 °F)

-40 to 95 °C (-40 to 203 °F), model dependent

· -40 to 60 °C (-40 to 140 °F) · -20 to 60 °C (-5 to 140 °F) if mounted in
metal threads

Process pressure

0.5 bar

8 bar, model dependent

Atmospheric

Key features

· IP68 fully potted option with its fully encapsulated PVDF sensor is resistant to corrosion, chemicals and extreme shock
· Battery and solar-powered friendly, with low start-up current and 10.5-volt operation
· Reduced blanking distance · 4-button user interface or remote
configuration · Compatible with SITRANS LT500
controller

· IP68 fully potted option with its fully encapsulated PVDF sensor is resistant to corrosion, chemicals and extreme shock
· PVDF, ETFE or PVDF copolymer and CSM face
· Submergence detection with shield available
· Compatible with SITRANS LUT400 and MultiRanger/HydroRanger controller

· Easy two button programming · Two switch outputs for alarms · Flange adapter · Sanitary mounting

Communications or outputs

HART 7

Controller dependent

2 SPDT Form C contacts, rated 5 A at 250 V AC or 30 V DC, transistor

Local HMI

·

·

Continuous measurement

·

·

Alarming and control

·

Extreme shock and vibration

·

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 11

RADAR FOR LIQUIDS AND SLURRIES
Wide range of process connections and antennas for most materials

Liquid level measurement challenges are no match for Siemens’ complete range of radar transmitters. Whether it’s turbulent process vessels, hazardous chemicals, or slurries with a tendency to build up, our portfolio has the solution.
siemens.com/radar

Take the 80 GHz SITRANS LR100 series: these transmitters operate far above most application requirements, easily handling whatever liquid or slurry you’ve got. Zero blanking distance allows you to measure right up to the sensor, avoiding costly overfilling.
SITRANS LR250 is an excellent choice for liquid level measurement in storage and process vessels to 20 meters (66 ft). With its range of antennas, this transmitter can handle whatever you need it to. Its class-leading range of process connections mean that hygienic applications are no problem for this instrument.
And for monitoring the level of sea or river water, SITRANS LR560 can effectively provide accurate measurements with its long range and narrow beam.

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 12

Order No.
Versions
Range
Process temperature Process pressure Key features
Communications or outputs Extreme temperature/ pressure Extreme corrosion resistance Long range SITRANS LT500 programmable Bluetooth connectivity

SITRANS LR100 series Universal applications with Bluetooth connectivity 7ML530, 531, 532, 533, 534
80 GHz compact radar transmitters with Bluetooth wireless technology.
SITRANS LR100 for basic measurement SITRANS LR110 with communication and hazardous approvals options SITRANS LR120 with communication and optional submergence shield for flooding protection SITRANS LR140 for basic measurement SITRANS LR150 versatile version with communication and hazardous approval options and optional HMI SITRANS LR100 to 8 m (26 ft) SITRANS LR110 to 15 m (49 ft) SITRANS LR120 to 30 m (98 ft) SITRANS LR140 to 8 m (26 ft) SITRANS LR150 to 15 m (49 ft) -40 to 80 °C (-40 to 176 °F)
-1 to 3 bar
· Narrow beam for flexible installations in existing vessel openings ­ or non- intrusively through plastic vessels
· Accuracy: 2 mm (0.08″) · Optional submergence shield · Gas & dust Ex approval
· HART, Modbus RTU · Bluetooth 4.2 or higher

SITRANS LR250

SITRANS LR560

Process conditions in oil and gas, chemical, or hygienic industries

Sea and river level measurement

7ML5431 PLA, 7ML5431 horn, 7ML5432, 7ML5440 7ML5433

2-wire, 25 GHz pulse radar level transmitter.

2-wire, 78 GHz FMCW radar level transmitter for continuous monitoring of solids or liquids.

SITRANS LR250 PLA for process industries n/a SITRANS LR250 FEA for extreme corrosive chemicals and high temperature SITRANS LR250 horn ideal for oil and gas, highest temperature rating SITRANS LR250 HEA hygienic antenna and variety of process connections

up to 20 m (66 ft)

40 m (131 ft) 100 m (328 ft)

-40 to 200 °C (-40 to 392 °F), process connection dependent
up to 40 bar g (580 psi g), process connection dependent
· Process Intelligence ­ advanced echo processing for reliable performance
· Graphical HMI · Quick Start Wizard and display
diagnostics · 3-A, EHEDG · Antennas for aggressive conditions
(acids, alkalis, and other corrosive chemicals) · SIL 2 for functional safety
HART or PROFIBUS PA

· -40 to 100 °C (-40 to 212 °F) · -40 to 200 °C (-40 to 392 °F) up to 3 bar g (43.5 psi g) option
· Process Intelligence ­ advanced echo processing for reliable performance
· Graphical Quick Start Wizard for easy and fast setup
· Stainless steel enclosure for near-shore corrosion resistance
· Narrow 4-degree beam yields reliable measurement when installed close to wall
HART, PROFIBUS PA

·

· ·
·
·

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 13

RADAR FOR SOLIDS
Narrow beam and high frequency for reliable measurement of solids.

Strong signals over long distances, reliable measurements unaffected by temperature change, and clear echo profiles in dusty environments–Siemens high-frequency 80 GHz radar means application troubles are a thing of the past.

SITRANS LR560 is the easiest-to-use solids radartransmitter on the market. With a suite of enhanced features including: 100 m range, high temperature capability, durable metal enclosure, purging, flanging and aiming options, and process connections to meet your basic to most challenging process needs.
SITRANS LR100 series transmitters meet the needs of general solids applications. Featuring a compact size, shorter ranges, and Bluetooth and SITRANS mobile IQ for easy installation and configuration.

siemens.com/radar

Order No.
Range
Process temperature Process pressure Key features
Communications or outputs Purging in challenging conditions Standard process flange connections Local HMI Intrinsically safe approval Bluetooth connectivity

SITRANS LR560 First choice 7ML5440 2-wire, 78 GHz FMCW radar level transmitter for continuous monitoring of solids. · 40 m (131 ft) · 100 m (328 ft) · -40 to 100 °C (-40 to 212 °F) · -40 to 200 °C (-40 to 392 °F) up to 3 bar g (43.5 psi g) option · Process Intelligence ­ advanced echo processing for reliable
performance · Graphical Quick Start Wizard for easy and fast setup · Push buttons or optional Intrinsically Safe infrared handheld
programmer · Narrow 4-degree beam yields reliable measurement when
installed close to wall · Dust Ex approval HART, PROFIBUS PA
·
·
·

SITRANS LR110/120 Basic applications 7ML531, 7ML532 80 GHz compact radar transmitters with Bluetooth wireless technology. SITRANS LR110 to 15 m (49 ft) SITRANS LR120 to 30 m (98 ft) -40 to 80 °C (-40 to 176 °F)
-1 to 3 bar · Narrow beam for flexible installations · Process connections: Thread 1″ · Accuracy: 2 mm (0.08″) · Beam angle: 4° (SITRANS LR120), 8° (SITRANS LR110) · Gas and dust Ex approval
· HART, Modbus RTU · Bluetooth 4.2 or higher
·
·

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 14

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 15

CONTINUOUS CONTACT LEVEL
Simple installation for interface or level monitoring that works

SITRANS LG guided wave radar transmitter is the solution for your easiest level or interface application to your most demanding–and everything in between. With simple, reliable installation and little to no configuration, you’ll be operational in minutes, saving you time and money.

Extreme process conditions don’t stand a chance, and these transmitters feature SIL options for applications requiring functional safety. Advanced diagnostics including trending, profiles, and event logging give you the data you need at every step of your process. Rapid response times and superior echo processing deliver accurate and reliable readings over the full application range, even in small containers and in low dielectric constant material. And with field-replaceable and adjustable probes, if your process changes, your measurement device can too.

siemens.com/sitransLG

SITRANS LC300 is ideal for a range of liquids, solids, and interface applications in the chemical, hydrocarbon processing, and food and beverage industries. Capacitance instruments use activeshield technology to ensure true and accurate level readings are recorded from the material surface.

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 16

Order No.
Versions
Range Process temperature Process pressure Key features
Communications or outputs High pressure/ temperature Interface with emulsion Clean interface Bottom mount Short range

SITRANS LG Liquids, solids, hygienic and extreme conditions 7ML5880, 7ML5881, 7ML5882, 7ML5883 Guided wave radar transmitters for level, level/interface, and volume measurement of liquids and solids.
SITRANS LG240 for hygienic applications SITRANS LG250 highly flexible solution for liquid level and interface applications SITRANS LG260 for solids applications SITRANS LG270 for extreme conditions including high temperature and high pressure applications · Insertion length 300 mm (11.8 inches) to 75 m (246 ft) · Probe types include: cable, rod, and coaxial versions -196 to 450 °C (-321 to 842 °F) -1 to 400 bar / -100 to 4000 kPa · Ability to measure interface and level at the same time, digital and 2 current
options available · Advanced diagnostics including trending, event logging, multiple profile
logging · Self monitoring to ensure reliable operation to international NE 107 standards · Automatic false echo suppression to ensure ongoing reliable measurements
even with buildup · Quick response with high accuracy · Software and display Wizards for ease of installation · Functional Safety suitable (SIL 2/ redundant 3) · Field replaceable and adjustable probes · Remote display or remote electronics · Accuracy up to ±2 mm (0.08″) · Strong construction with dual seal to ensure its integrity in tough applications
including options for aggressives such as ammonia · Real-time measurements for applications in steam boilers · Safety rated for 72 hours of unattended operation · HART, PROFIBUS PA, Modbus RTU, and Foundation Fieldbus

SITRANS LC300 General liquids or solids 7ML5670-3 Inverse frequency shift capacitance continuous level transmitter for liquids, solids and Interface detection for harsh conditions including buildup. n/a
· Rod: max. length 5.5 m (18 ft) · Cable: max. length 25 m (82 ft) -40 to 200 °C (-40 to 392 °F) -1 to 35 bar (-14.6 to 500 psig) · Active-Shield technology · Push-button calibration · Integrated local display · Inverse frequency approach provides high
resolution · Accuracy: < 0.5% of actual measurement
value
4 to 20 mA

·
· ·
· ·

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 17

POINT LEVEL
A switch for every application with options for remote testing and extreme temperatures.

With options as simple or sophisticated as you need them to be, Siemens point level devices are your answer.
siemens.com/pointlevel

Whether you’re looking for backup, high- or lowlevel detection, interface, or dry run protection ­ these switches will reduce your maintenance, downtime, and equipment replacement costs.
Remote testing? Not a problem. A range of Siemens point level instruments now feature convenient remote testing via single or two-channel remote test signal conditioners or your control system.
Product buildup? Rotary point level devices specialize in low bulk density applications, ensuring accurate readings even in dusty, turbulent, and vaporous environments. And because even a small level change creates a large and detectable change in frequency, Siemens capacitance switches provide excellent resolution while consistently demonstrating immunity to buildup.
Need functional safety in your application? Siemens offers the world’s first rotary paddle switch with SIL options in addition to a series of SIL instruments in all our point level lines.
Whatever your requirement, Siemens has a switch solution.

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 18

Order No.
Versions
Range
Process temperature Process pressure Key features
Comms. Buildup Interface Granular size > 20 mm Very low bulk density Remote testing

SITRANS LVS100/200/300

SITRANS LVL100/200

SITRANS LPS200

Pointek CLS100/200/300 and SITRANS LCS050

Dry powder solids

Non-sticky liquids and slurries

Extreme temperatures and buildup

Solids, liquids and interface point level detection

7ML5735, 7ML5731-4, 7ML5736-8

7ML5745, 7ML5746, 7ML5747, 7ML5725-8, 7ML5730 7ML5748

7ML5501, 7ML5610, 7ML5630-3, 7ML5640-3, 7ML5650-2, 7ML5660-2, 7ML5772

Vibrating point level switches for dry powder, fine grain, and granular bulk solids with densities from 5 to 30 g/l (0.3 to 1.9 lb/ft3).

Compact vibrating point level switch for liquid and slurry and pump protection. Ideal for use in confined spaces.

Rotary paddle switch for point level detection of powder and granular solids with bulk densities as low as 15 g/l (0.94 lb/ft3).

RF capacitance switch for level detection in interfaces, solids, liquids, slurries, and foam and demanding conditions.

SITRANS LVS100 for dry powder SITRANS LVS200 for dry powder with very low density SITRANS LVS300 for bulk solids and aggressive applications

SITRANS LVL100 compact SITRANS LVL200 for applications with higher pressure/ temperature Ex approvals

Standard for side or top mount Cable extended top mount Shaft protection for side mounting with buildup Angled shaft for aggressive side mount applications

SITRANS LCS050 ultra-compact Pointek CLS100 compact Pointek CLS200 standard Pointek CLS300 for harsh demanding applications

Insertion length: 170 mm to 20 m (6.7″ to 65 ft)

Insertion length: 40 mm to 4000 mm (1.5″ to 13 ft)

Insertion length: 100 mm to 10 m (4″ to 30 ft)

Compact version starts at 12 mm (0.47″) Rod: 50 mm to 5.5 m (14″ to 18 ft) Cable: 1 to 30 m (3 to 98 ft)

-40 to 150 °C (-40 to 302 °F)

-196 to 450 °C (-321 to 842 °F)

-25 to 600 °C (-13 to 1112 °F)

-40 to 400 °C (-40 to 752 °F) high temperature version

Up to 10 bar g (145 psi g) Pressure to 30 bar options available

-1 to 160 bar/-100 to 16000 kPa (-14.5 to 2320 psi g)

Up to 0.5 bar g (7.25 psi g) Optional up to 10 bar g (145 psi g)

Up to 35 bar g (511 psi g)

· High, low and demand level detection
· Replaceable electronics · Interface model for solids in
liquids · Best-in-industry lowest density
measurement · Unaffected by external
vibrations · Remote buildup monitoring · Customer supplied pipe exten-
sions for flexible installations

· Test function including remote options
· Fault monitoring for corrosion, loss of vibration, or line break to the piezo drive
· Compact design for tight spaces
· ½” process connections · SIL 2 and hygienic options · Options for extreme pressures
and temperatures

· Optional hinged vane · 5 seal ingress protection · Motor switches off during
alarm for long service life · Friction clutch design prevents
impact damage · Rotation failure monitoring · SIL 2 options

· Inverse frequency provides high resolution
· Adjustable sensitivity to handle buildup or non contact material detection
· SensGuard for abrasives · PPS or PVDF probe options · Display with local button
configuration · Active-shield for increased sen-
sitivity and buildup protection · SIL 2 options

N/A

N/A

N/A

PROFIBUS PA, IO-Link

·

·

·

·

·

·

·

·

·

·

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 19

HYDROSTATIC
Level measurement in chemical and petrochemical industries

Hydrostatic level measurement with Siemens gauge, absolute, and differential pressure transmitters is a low cost option for direct mounting or mounting with remote seals on tanks and vessels.

These instruments can handle extreme chemical and mechanical loads as well as electromagnetic interference. They are widely applied in chemical and petrochemical industries.

siemens.com/hydrostatic

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 20

SITRANS LH100

SITRANS P320/420

SITRANS LH300

SITRANS P500

Order No.
Range Process temperature Process pressure Key features
Communications or outputs Local display SIL Ceramic membrane

SITRANS LH100

SITRANS LH300

SITRANS P320/420

SITRANS P500

Submersible sensor

Submersible sensor

Advanced

Premium

7MF1570

7MF1575

7MF036

7MF56x

Hydrostatic level transmitter for direct mounting in tanks and vessels.

Hydrostatic level transmitter for direct mounting in tanks and vessels

Hydrostatic level transmitter for mounting with remote seal on open or closed vessels with corrosive or non-corrosive liquids.

Hydrostatic level transmitter for mounting with remote seal on open or closed vessels with corrosive or non-corrosive liquids.

3 m to 20 m H2O (9 ft to 60 ft H2O)
-10 to 80 °C
(14 to 176 °F)

1 m to 40 m H2O (3 ft to 120 ft H2O)
-10 to +80 °C
(14 to 176 °F)

50m (167ft) H2O
-40 to 100 °C (-40 to 212 °F)

60m (210ft) H2O)
-40 to 125 °C (-40 to 257 °F)

N/A

N/A

depending on process

depending on process

connection

connection

· Applicable to harsh environmental conditions due to the piezoresistive ceramic sensor
· Compact stainless steel enclosure and sensor
· Easy installation · Intrinsically Safe · Special measuring ranges:
0 to 3 mH20 to 0 to 30 mH20 · Cable length up to 100 m
(328 ft)

· Compact stainless steel transmitter with Al2O3 ceramics sensor
· Sensor purity 99.6% · Easy installation · Special measuring ranges: · 0 to1 mH20 to 0 to160 mH20 · Cable length up to 1000 m
(3300 ft)

· With remote seals up to 400 °C (752 °F)
· Self-diagnostic elements for parameterization
· Intrinsically Safe · Explosion proof and flame
proof · SIL 2/3 approved · Corrosion-resistant
diaphragm and process connections · Range of different process connections

· With remote seals up to 400 °C (752 °F)
· Diagnostics for customized configuration
· Outstanding accuracy and excellent long-term stability
· Short response times · Intrinsically Safe · Explosion proof and flame
proof · Corrosion-resistant
diaphragm and process connections · SIL 2 approved · Range of different process connections

N/A

4 to 20 mA

HART

HART

·

·

·

·

·

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 21

LEVEL BY WEIGHT
Gravimetric technology provides non-intrusive mass measurement

With SIWAREX electronics and load cells, not only are you choosing the highest quality in construction, long-lasting performance, and easy integration into your weighing systems, you are also opening the doors to Siemens’ comprehensive spectrum of instrumentation.

Automate all of your scales with SIWAREX weighing modules. Part of Siemens Totally Integrated Automation (TIA), SIWAREX modules can be integrated into SIMATIC and expanded as required to meet your individual requirements.

siemens.com/weighingmodules

Order No.
Typical applications
Automation system integration
Accuracy SIMATIC PCS7 integration

SIWAREX WT231

SIWAREX WP231

SIWAREX WT231 Standalone 7MH4965-2AA01
Fast basic weighing and force measuring tasks like platform, silo or hopper scales, built-in a rugged stand-alone solution.
· RS485 (Modbus RTU) · 0/4-20mA · Four digital outputs · Four digital inputs
0.05% ­

SIWAREX WP231 S7-1200 integrated 7MH4960-2AA01
Fast basic weighing and force measuring tasks like platform, silo or hopper scales, seamless integration into SIMATIC S71200 environment. · SIMATIC S7-1200
(directly via SIMATIC bus) · Operator panel · Automation systems from
other manufacturers, via Ethernet (Modbus TCP/IP) or RS-485 (Modbus RTU)
­

SIWAREX WP321 ET 200SP integrated 7MH4138-6AA00-0BA0
Fast and accurate weight measurement applications.

SIWAREX U
S7-300 integrated
7MH4950-1AA01 (one channel) 7MH4950-2AA01 (two channel)
Basic weighing and force measuring tasks, one or two channel modules available.

· SIMATIC S7-400 · SIMATIC S7-300 · SIMATIC S7-1200 · SIMATIC S7-1500 via SIMATIC
ET 200SP distributed IO

· SIMATIC S7-300 (directly or via SIMATIC ET 200M)
· SIMATIC S7-400 (H) · SIMATIC PCS 7 (H) (via
SIMATIC ET 200M)

Via SIMATIC PCS7 add-on software package including faceplate and function block

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 22

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 23

LEVEL BY WEIGHT
Diverse types and graded load classes offer a solution for a range of applications

SIWAREX load cells have high precision and repeatability of weighing and batching processes. They are designed for a range of applications, especially when accuracy is a must. With Siemens, you can source both your load cells and electronics. Choose from our extensive, performance-graded line of weighing systems ­ with everything you need for the whole range of tasks in your industry.

SIWAREX load cells are ideal in almost any industrial sector ­ food- processing, steel-making, chemical and pharmaceutical, to name a few. With the diverse construction types and comprehensive, graded load classes ranging from 300 grams to 500 tons (6.6 pounds to 551 short tons), you are sure to find the right load cell for your application.

siemens.com/loadcells

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 24

SIWAREX WL260

SIWAREX WL270

SIWAREX WL230

Type
Order No. Typical applications
Nominal load (Emax)
Accuracy class and max. scale intervals Degree of protection

SIWAREX WL230

SIWAREX WL250

SIWAREX WL230 Shear beam
7MH5107, 21 Container, overhead rail conveyor, and platform scales
0.1 to 5 t (0.55 to 5.5 short tons) C3, C4, C5 3,000…5,000
IP68/67

SIWAREX WL230 Bending beam

SIWAREX WL250 S-Type

7MH5106
Small scale containers and platform scales

7MH5105
Tank weighing, hybrid scales, or suspended container weighing

10 to 500 kg (22 to 1102 lbs)
C3 to OIML R60; 3,000 intervals
IP68

50 kg to 10 t (110 lbs to 11 short tons)
C3 to OIML R60; 3,000 intervals
IP67

SIWAREX WL260 Single point

SIWAREX WL270 Compression

7MH5118

7MH5108, 10

Small to medium platform scales and weighing machines, conveyor small scales

Containers, hoppers, and vehicle scales

10 to 500 kg 10 to 100 t (22 to 1102 lbs) (11 to 220
short tons)

C3 to OIML R60; 3,000 intervals

C3 to OIML R60; 3,000 intervals

IP68/IP69K

IP68

SIWAREX WL270 K Compression
7MH5114 Vehicle scales, overhead rail scales, container weighers

SIWAREX WL280 RN Ring-torsion
7MH5113 Container, conveyor, platform and roller table scales

SIWAREX WL290
Double shear beam
7MH5122
Platform scales, hoppers and vehicle scales

2.8 to 500 t (3 to 551 short tons) 0.1%
IP68

60 kg to 60 t (132 lbs to 66 short tons)
C3 to OIML R60; 3,000 intervals
IP66/IP68

2.3 to 113 t (2 to 111 tn. L)
C3 to OIML R60
IP67

For comprehensive monitoring of the weighing process down to each single load cell, we offer our digital junction box SIWAREX DB

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 25

REMOTE MONITORING AND DISPLAYS
Share critical information and provide control where it is needed

Ideal for remote monitoring applications including inventory levels, regulatory monitoring, remote maintenance alarming, or process and environmental monitoring, SITRANS RTU3000C family remote data manager helps you stay connected and informed.
siemens.com/SupplementaryComponents

SITRANS RD100, SITRANS RD150, SITRANS RD200, and SITRANS RD300 remote displays bring you the flexibility of seeing instrumentation readings in a convenient location for your operators.
Our family of displays offer options for integrated pump control, totalizing, dual input, remote communication and monitoring via HART or Modbus and remote configuration of connected sensors. Siemens’ selection of displays gives you an inexpensive view into your processes.
And the compact SIMATIC RTU3000C remote terminal units are energy-self- sufficient, low-power devices with flexible power supplies. Easily configured, they operate reliably even under harsh conditions and in areas prone to flooding.

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 26

Order No.

SITRANS RD100
Loop powered
7ML5741
2-wire loop-powered enclosed remote digital display for process instrumentation.

SITRANS RD150
Loop with HART
7ML5742
2-wire 4 to 20 mA loop remote display with HART suitable for monitoring connected sensors` primary HART variables.

SITRANS RD200
Universal
7ML5740
Universal input, panel mount, remote digital display for process instrumentation.

SITRANS RD300
Full featured
7ML5744
Dual-line, panel mount, remote digital display for process instrumentation.

Input types

4 to 20 mA

4 to 20 mA and HART

Universal current, volt- 4 to 20 mA, 0 to 10 V DC age, RTD, thermocouple

Digits Key features

3.5 digit display
· 2-wire loop-powered · Two-step configura-
tion · Intrinsically Safe, non-
incendive · Serviceability without
loop interruption · Factory calibrated

5 digits
· Remote display with sensor configuration via HART
· Monitor extended data via HART
· Flexible field and panel mount options
· Menu driven backlit display
· Plastic, aluminum and stainless housing options

4 digit display
· Easy to read in all conditions
· Temperature and process meter
· Software supports monitoring and configuration
· Alarm indication and process control
· Provides power to instrument
· Modbus RTU output

Operating temperature

-40 to 85 °C (-40 to 185 °F)

HART

Modbus

Pump control

Loop powered

·

Graphic

display

Remote

comms.

· Without display and adjustment module -40 to 80 °C (-40 to 176 °F)
· With display and adjustment module -20 to 70 °C (-4 to 158 °F)
·
·
·

-40 to 65 °C (-40 to 149 °F)
· ·

Dual-line 6 digit display · Easy to read, dual-line
display · 32-point lineariza-
tion and square root function · Nine digit totalizer · Flexible outputs with up to eight relays and eight digital I/O for process control alarming · Modbus RTU output · Multi-pump alternation control · Software supports monitoring and configuration -40 to 65 °C (-40 to 149 °F)
· ·

SIMATIC RTU3000C family Remote sites 6NH3112-4BB00-0XX0 Compact remote monitoring and control unit. Battery, solar or mains supply. Sensor inputs. Internal web-page for configuration and monitoring. Integrated modem. · 8 DI · 4 4-20mA · HART/Modbus
expansion available Internal web page · Battery or solar-
operated · 10.8V to 28.8V DC · LTE-M/NB-IoT · Internal GPS · Text message, email
and datalogging · FTP client · Ethernet port · 4 Digital outputs · Local control
functions · IP20 rating
Vertical: -40 to 60 °C (-40 to 140 °F) Horizontal: -40 to 70 °C (-4 to 158 °F)
optional optional
·
web page
·

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 27

GO THE DISTANCE WITH DIGITALIZATION
Introduce easy-to-use apps into your operations and harness new opportunities

Put your plant’s data to work and see your operations open up before you with intuitive digital solutions from Siemens.
Combined with our digitalization-ready instruments, apps like SITRANS mobile IQ and SITRANS SAM IQ bring usable device data directly to operators’ smartphones or tablets, giving your staff the ability to examine trends, analyze performance, and even commission devices.

SITRANS Library provides visualized device functions to help in both the engineering phase and with process control. The measurement range on the transmitter and in the control system can be synchronized with one click, ensuring consistency between the field device and DCS system, higher reliability, and transparency.
With the ability to connect your products, instruments, systems, and machines, only a complete automation and instrumentation supplier like Siemens puts the information your operators need directly in their hands. With new customer- driven apps coming to market from our world-class R&D teams, the possibilities truly are endless.

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 28

SITRANS SAM IQ ­ Smart Asset Management Insight into your field devices’ health status, detailed trending of process values, and access to device- specific diagnostic data: SITRANS SAM IQ delivers smart asset management directly in the app.
SITRANS mobile IQ The SITRANS mobile IQ app gives you easy access to field instrumentation from your smartphone or tablet. Via a Bluetooth connection, supported field devices in the environment can be easily and quickly commissioned, parameterized and monitored.
PIA Life Cycle Portal This portal helps you select, size and configure your ideal piece of instrumentation. The portal interfaces with COMOS and exports to Siemens Industry Mall (mall.industry.siemens. com). You are able to track the lifecycle of your instrument, see warranty and extended exchange option information as well additional information such as factory certificates (e.g., for calibration or validation).

SIMATIC Process Device Management (PDM) Simatic Process Device Manager (PDM) is one of the most widely used tools for access of a device’s parameters, diagnostic and maintenance information.
More than 4,500 devices from more than 200 different manufacturers can be commissioned, parametrized, or serviced using a single program with a uniform user interface.
SITRANS Library · Easy use of device-specific functions and data from
devices of the SITRANS and SIPART product families, such as dosing or totalizer functions in solutions with SIMATIC PCS 7 · Library with device- specific function blocks, block symbols, and faceplates · Fully compatible with SIMATIC PCS 7 Standard Advanced Process Library (APL) through the entire lifecycle, from engineering to running of the plant

COMOS COMOS is the engineering tool from Siemens for the entire lifecycle of your plant. With the direct integration of our PIA Lifecycle Portal, we guarantee the seamless integration of our field devices in the engineering environment. We can offer field devices best suited to your processes, properties, and measuring requirements.

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 29

Sales and support

Custom engineering Siemens provides custom-engineered products to solve your special application needs. From material compatibility challenges to unique size requirements, Siemens custom engineering team can help.
Service around the world Plants must function reliably at all times. Efficient and effective process instrumentation and analytics are an indispensable requirement to this end. You also need to be certain of fast and competent service from your supplier. Siemens is a global company that reacts locally. Whether you require consulting, quick delivery, or installation of new devices, the Siemens network of specialists is available to you around the world, wherever your location.
Service around the clock Our online support system offers rapid, comprehensive assistance regardless of time or location. From product support to service information, Siemens Industry online support is your first choice ­ around the clock, 365 days a year.
siemens.com/service&support

Maximize your skills with factory-certified training
Siemens provides a full schedule of Process Instrumentation training opportunities for Siemens employees, channel partners, and customers.

PI training The PI Introductory Training courses are designed for new sales and service employees to learn the product lines, the technologies, and the applications. These courses are also prerequisites for the advanced technology courses which provide in-depth application training.
Designed for hands-on learning, all courses are led by fieldtested instructors who combine extensive application and instrumentation knowledge with seasoned training experience. Our PI Training Center is specifically designed to optimize your classroom time. It is fully equipped with application simulation stations, a full range of PI instruments, and complete industrial communication networks.
For current information and schedules, visit our website at:
siemens.com/pi-training

Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 30

TOTALLY INTEGRATED AUTOMATION.
End-to-end integration from controller level to field level
With Totally Integrated Automation (TIA), Siemens is the only provider of an end-to-end integrated portfolio of products and systems for the automation of the entire production workflow. From the goods receiving area to the finished goods warehouse.
Totally Integrated Automation reduces the complexity of the automation solution and enables what really counts: the practical combination of optimally coordinated individual components without interface problems. Totally Integrated Automation integrates not only the production process but all parts of the company from the field level to the management level. The result: a perfectly coordinated overall concept that delivers higher productivity. Communication flexibility Siemens TIA approach offers ease of connection to a DCS system such as SIMATIC PCS 7 using industrial standards. Siemens provides communication flexibility, supporting: SIMATIC PDM PROFIBUS HART FOUNDATION Fieldbus Model 375/475 HART field communicator and Emerson AMS SmartLinx (cards are available for PROFIBUS DP, Modbus RTU, and DeviceNet) FDT Software via SITRANS DTM
Technology selector | Controllers | Ultrasonics | Radar | Continuous contact | Point level | Hydrostatic | Level by weight | Remote monitoring and displays | Digitalization | Support 31

Published by Siemens AG 2021 Process Industries and Drives Östliche Rheinbrückenstr. 50 76187 Karlsruhe Germany
Article No.: DIPA-I10276-00-7600 Dispo 27900 WS 01182.0 PDF only © Siemens AG 2021
Follow us on: twitter.com/siemenssensors facebook.com/siemenssensors youtube.com/siemens

Subject to changes and errors. The information given in this document only contains general descriptions and/or performance features which may not always specifically reflect those described, or which may undergo modification in the course of further development of the products. The requested performance features are binding only when they are expressly agreed upon in the concluded contract.
All product designations may be registered trademarks of Siemens AG. All other designations in this document may represent trademarks whose use by third parties for their own purposes may violate the proprietary rights of the owner.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals