SEGON JS-EST10T Mini Satellite Loudspeaker Instruction Manual
- June 12, 2024
- SEGON
Table of Contents
3”MINI Satellite Loudspeaker
Outdoor Wall Mount Speaker Series JS-EST10T
USER MANUAL
INTRODUCTION
Thank You For Purchasing the SEGON® Product
Segon® Speakers features an outstanding combination of performance and value
in each of our products. To ensure you get the most out of your new
loudspeakers please take a moment to read this manual before you get started.
A Few Words About Your New Outdoor Wall Mount Speaker
Segon® Outdoor loudspeakers are designed to accurately reproduce high fidelity
music in an outdoor environment. Ideally designed for background music and
business place integration.
High freuency response as required for outdoor scenerios with great bass
response Segon® Outdoor Loudspeakers are IP64 waterproofed and are built to
withstand the most rigorous weather and climate conditions.
Every exposed bolt is made of stainless steel is ensure endurance and
fucionality.
The cabinet is made of a high-impact ABS poly-mer painted with UV protecion
industrial quality paint.
The primary components include a paper cones made of various materials and
around the rubber surround. Makes the JS-EST10 mini&light, high sensitivity
and better sound.
PRODUCT DETAIL
AUDIO CONNECTIONS
Be careful not to cross wires when
installing your speakers. Wiring should always be negative to negative and
positive to positive.
(Figure 2. shows speaker c. incorrectly wired)
MOUNTING THE SPEAKERS
Installation of your Segon® Speaker is designed to be simple and intuati e, it
is largely advised to consult a professional installer.
Make sure the materials on which you plan to mount the speakers can support
the weight of the speakers.
Hardware is provided for attaching the brackets directly to a solid wood beam
and also to sturdy drywall that is atleast 5/8″ thick.
Never aach the speakers to a wall that might contain electrical wiring or
plumbing.
IF YOU ARE UNSURE ABOUT ANY OF THESE INSTRUCTIONS, PLEASE CONTACT A
PROFESSIONAL CUSTOM AUDIO INSTALLER.
Although Segon® Speaker are waterproof and can be placed directly in the
elements, mounting the speakers in such away that they will not absorb rain or
sun directly will improve the speaker’s longevity. Placing the speaker in a
corner will also help improve bass performance.
Always mount the speakers so that they are aimed slightly downward in order to
not collect rain water. Also, make sure to follow the “drip loop”
instrucions/example diagram.
Segon® Speaker can be mounted vertically or horizontally and then aimed as
needed to deliver the best sound performance for your area. In most cases, you
will achieve the best stereo sound and imaging if you mount both speakers
along the same wall between 3-6 meters apart.
INSTALLATION
STEP 1 Fix the bracket to the wall.
STEP 2 Connect the speaker wire. STEP 3 Attach phoenix connector to
the speaker. STEP 4 Attach the speaker to the bracket. STEP 5
- The speaker cable can be removable and fixed through the hole.
- Done.
PROTECTING YOUR OUTDOOR SPEAKER With a “DRIP LOOP”
Segon® recommends using a “drip loop” when installing your speaker cable to
help minimize the direct flow of water onto the speaker. This will assist in
reducing any potential long-term oxidation or water penetration issues by
providing a low point for water to escape prior to reaching the speaker.
The below examples illustrate how (and how not) to uilize a drip
loop.
Underpower VS. Overpower
- Most speaker damage is caused by amplifiers with too little power (wattag ).
- An overdriven amplifier clips the waveforms and leads to speaker distortion.
- Clipping is usually audible and it may vary from a harsh sound to a fuzzy or unclear sound.
Volume Control
- The volume is controlled by your amplifier.
- If you hear the clipping at high volume levels, turn down the volume until the distortion is gone.
- Damage caused by operating the speakers at distorted volume levels is not covered by the warranty.
PRODUCT SPECIFICATIONS
Woofer | 3 inch*1 ( Paper cone, Foam cotton Surround |
---|---|
Impedance | 100V |
Sensitiv ty( Output SPL) | 84±3dB |
Freq. Range | 228 Hz-20kHz±3dB |
Power Handling RMS (Rated Input power) | 15W program, 10W ( IEEE 219 ) |
Housing Material | ABS |
Dimension(WHD) | 90.597107.5mm |
Net Weight | 0.63 kg |
Attachmen | Bracket, Screw |
Multi Dev ce Connection | YES |
IP Rating | IP64 |
Mini Satellite Loudspeaker JS-EST10T
Documents / Resources
|
SEGON JS-EST10T Mini Satellite
Loudspeaker
[pdf] Instruction Manual
JS-EST10T Mini Satellite Loudspeaker, JS-EST10T, Mini Satellite Loudspeaker,
Satellite Loudspeaker, Loudspeaker
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>