Sharkoon SGD20 Skiller Gaming Desk Instruction Manual

June 12, 2024
sharkoon

Sharkoon logo SGD20 Skiller Gaming Desk
Instruction ManualSharkoon SGD20 Skiller Gaming
Deskhttps://www.youtube.com/watch?v=uz1tgqUg9DQ

Dimensions

Sharkoon SGD20 Skiller Gaming Desk - Dimensions

Package Contents

Sharkoon SGD20 Skiller Gaming Desk - Package Contents

Safety Instructions

A) Assemble this desk with the help of another person.
B) Ensure that all parts of the desk are undamaged and are assembled correctly!
Damaged parts could impair the safety and function of the product.
C) To avoid injury or damage to property, always make sure that all screws are fitted tightly!
Regularly check that the screws remain tight during the lifetime of the desk.
D) Use the desk only on flat, standard floor surfaces and only indoors!
E) Do not place heavy loads on the desk over its permissible load capacity of 100 kg!
In addition, make sure that the load on the desk is evenly distributed to prevent the desk from tipping over! Never stand on the desk, and do not use as a ladder, climbing aid or the like.
F) The desk is not to be used as a children’s toy. Keep babies away from small parts and the packaging foil. Risk of suffocation!
G) The desk should not be used if parts are damaged or missing.
H) Do not use aggressive cleaning agents to clean the desk!
I) To avoid scratches, be careful of sharp objects on or near the tabletop!
J) If you want to adjust the height of the desk legs after assembly, first remove all objects from the tabletop and then turn the desk upside down with the help of a second person.
The height can then be readjusted.

Assembly of Desk Legs

Sharkoon SGD20 Skiller Gaming Desk - Assembly of Desk
Legs Screw two leveling feet (F) under each desk foot.Sharkoon SGD20 Skiller Gaming Desk - Assembly of Desk Legs
2Place a washer (C) on each of the four M8 screws (A).
Then screw the two legs onto the desk feet, each with two screws (A) using the hex key (D).
Attention: If the desk legs are not assembled at the same height, the tabletop cannot be mounted.Sharkoon SGD20 Skiller Gaming Desk - Assembly of
Desk Legs 3The desk can be adjusted to three heights during assembly: 71.1 cm, 75.1 cm and 79.1 cm. Place the screws one hole higher to position the tabletop higher up and one hole lower to position the tabletop lower down.

Assembly of Desk Frame

Sharkoon SGD20 Skiller Gaming Desk - Assembly of Desk
FrameUse the hex key (D) and six M6 screws (B) to screw the beams together.
Attention: Make sure that the beam parts are assembled correctly and with the red arrows pointing upwards! Only tighten the screws completely after the desk frame has been correctly positioned on the tabletop.Sharkoon SGD20 Skiller
Gaming Desk - Assembly of Desk Frame 2Attach the beams to the desk legs with eight M6 screws (B) using the hex key (D).
Attention: Make sure again that the screw holes for the tabletop are pointing upwards according to the red arrows! Otherwise, it is not possible to attach the tabletop.Sharkoon SGD20 Skiller Gaming Desk - Assembly of Desk
Frame 3Screw together the three parts of the cable management system with eight M6 screws (B) using the hex key (D).
Attention: Do not fully tighten the screws until the desk frame is correctly positioned on the tabletop!
Otherwise, a stable assembly cannot be ensured.Sharkoon SGD20 Skiller Gaming
Desk - Assembly of Desk Frame 4Screw the cable management system with four M8 screws (A), using the hex key (D), to the back of the desk.
Attention: Do not fully tighten the screws until the desk frame is correctly positioned on the tabletop!
Otherwise, a stable assembly cannot be ensured.

Assembly of Tabletop

Sharkoon SGD20 Skiller Gaming Desk - Assembly of
TabletopPut together the three parts of the tabletop. Pay attention to the correct alignment of the individual parts of the tabletop.

Final Assembly of the Parts

Sharkoon SGD20 Skiller Gaming Desk - Final Assembly of the
PartsAttach the desk frame to the tabletop with 16 M6 screws (B) using the hex key (D).
Attention: Only now, completely tighten all the screws on the desk frame.Sharkoon SGD20 Skiller Gaming Desk - Final Assembly of the Parts
2Attach the headset holder (G) to either the left or right side of the desk with two M6 screws (B) using the hex key (D).Sharkoon SGD20 Skiller Gaming Desk - Final Assembly of the Parts
3Use a suitable object to pierce the sealed hole for passing peripheral cables through the center of the tabletop. Place the mouse mat (H) on the tabletop. Close each of the two holes with a closure cap (E). Sharkoon SGD20 Skiller Gaming Desk - Final Assembly
of the Parts 4Attach the magnetic cable channel (I) to the left or right desk leg.

NOTE —

Sharkoon SGD20 Skiller Gaming Desk - qr code 2http://sharkoon.com/links
Follow us on Sharkoon Technologies GmbH
Grüninger Weg 48
35415 Pohlheim
Germany
© Sharkoon Technologies 2022Sharkoon logo

Documents / Resources

| Sharkoon SGD20 Skiller Gaming Desk [pdf] Instruction Manual
SGD20 Skiller Gaming Desk, SGD20, Skiller Gaming Desk, Gaming Desk, Desk
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals