Sharkoon Elbrus 2 Gaming Chair User Manual

Elbrus 2 Gaming Chair
User Manual

 Elbrus 2 Gaming Chair

Dimensions

Package Contents

Package Contents

A) 1x Backrest
B) 1x Seat base with armrests
C) 2x Side covers
D) 1x Hex key (M8)
E) 4x M8 x 18 mm screws
F) 4x M8 x 25 mm screws
G) 2x M5 cover caps
H) 8x Spring washers
I) 2x M5 x 10 mm screws
J) 8x Washers
K) 1x Piston cover
L) 1x Gas lift piston
M) 1x Five-star base
N) 5x 60 mm wheels
O) 1x Chair mechanism
P) 1x Manual
Q) 1x Headrest cushion
R) 1x Lumbar cushion

Safety Instructions

A) We recommend that the chair be assembled with the help of a second person.
B) To avoid any possibility of the chair tipping over, ensure that the weight on the chair is evenly distributed.
C) Ensure you keep your feet on the ground at all times and do not press your head against the backrest while fully reclining in the chair. Do not sit on the armrests.
D) Do not place heavy objects on the chair and do not use it as a ladder.
E) When adjusting the backrest, ensure your fingers are out of the wayF) To avoid damage, never pull hard and fast on the handles. G) Avoid direct sunlight to ensure plastic components do not become brittle.
H) Do not use aggressive cleaning agents to clean the chair.
I) The chair can be used for both work and rest. The higher backrest fully supports the spinal column, while the chair mechanism and gas lift piston allows users to vary chair height to their office and/or computer desk.
J) The chair is classified as a type C office work chair.
K) Attention! Only instructed personnel should exchange or work on the chair adjustment elements.
L) We recommend the chair be used on a standard indoor floor surface.
M) Ensure that all parts are intact and properly installed. Incorrect installation may result in injury. Damaged parts can affect safety and function.
N) The item should not be used if parts are damaged or missing.
O) Never stand on the chair, use as a ladder, climbing aid or the like.
P) Keep small parts and packaging away from children. There is a risk of suffocation!
Q) The chair is not a children‘s toy. Keep babies and toddlers away from the swivel chair.
R) With sensitive hard floors (e.g. laminate, cork, parquet) use a commercially available floor protection mat.
S) The manufacturer assumes no liability for direct damage or consequential damage resulting from improper use or non- observance of safety instructions.
T) The chair is durable up to 150 kg.

Five-Star Base and Gas Lift Piston

Five-Star Base and Gas Lift Piston
Insert the wheels into the five-star base until they click into place.
Five-Star Base and Gas Lift Piston
Insert the gas lift piston into the five-star base and then slide the piston cover over the gas lift piston.

Optional Lumbar Cushion

Optional Lumbar Cushion
If desired, the provided lumbar cushion can be used.
To attach, pull the lumbar cushion straps through the backrest openings from front to back.
This can also be done after the chair is assembled.    Optional Lumbar Cushion
To secure the cushion, connect both buckles from the bottom and top of the backrest.

Connect Backrest with Seat Base

To connect the backrest with the seat base, first prepare the necessary screws.
Attach a spring washer, followed by a washer, onto the four M8 x 25 mm screws.
Align the backrest and the rear of the seat base carefully according to the picture.
Connect Backrest with Seat Base
Afterwards, use the hex key to attach two of the previously prepared M8 x 25 mm screws with the backrest and the support brackets on each side of the chair.
Attention! To avoid damage to property or personal injury, ensure all screws are screwed together tightly! Tighten the screws at regular intervals!

Side Covers

Attach the side covers to the support brackets on the chair. Then fasten the M5 x 10 mm screws on both sides using the provided screwdriver located on the other end of the hex key (M8). Once secured, insert and press firmly both cover caps into the screw holes to cover the screw.

Mechanism Mounting

Mechanism Mounting
Align the chair mechanism, according to the posted directions, on the bottom of the seat base.
Attach the chair mechanism by using the four M8 x 18 mm screws.
Attention! To avoid damage to property or personal injury, ensure all screws are screwed together tightly! Tighten the screws at regular intervals!

Linking the Parts

Lastly, connect the five-star base and chair by inserting the gas lift piston into the opening on the Lastly, connect the five-star base and chair by inserting the gas lift piston into the opening on the chair mechanism.The chair is now successfully assembled.
Attention! To avoid damage to property or personal injury, ensure that the gas lift piston and chair mechanism are mounted correctly!

Optional Headrest Cushion

If desired, the provided headrest cushion can be used. Pull the straps of the headrest cushion from the front through the backrest openings and then secure them behind.

Seat Backrest Adjustment

To adjust the backrest, first pull the handle on the right-side of the seat base. Lean forwards or backwards to tilt the backrest into the desired position. Once the backrest is in the desired position, release the handle to lock the backrest into place.

Seat Height Adjustment

The seat height can be adjusted via the right handle underneath the seat base. The chair will move into a lower position if simultaneous pressure is placed on the seat base surface while the handle is pulled. The chair will move into a higher position if no simultaneous pressure is placed on the seat base surface while the handle is pulled. Once the seat is at the desired height, release the handle to lock the seat into place.

Tilt Mechanism Adjustment

The tilt mechanism can be adjusted via the handle underneath the seat base. The tilt mechanism is unlocked when the handle is pulled outwards. The tilt mechanism is locked when the handle is pushed inwards.

Tilt Mechanism Adjustment
Tilt mechanism resistance can also be adjusted via means of the rotary knob located underneath the seat.
Turn the knob to the left or right to adjust the resistance.

Adjustment of Armrests

To adjust the armrest height, pull the handle upwards. While holding the handle, the armrest can be moved upwards and downwards to the desired position. Once the armrest is in the desired position, release the handle to lock the armrest into place.The armrest can be moved back and forth by being firmly pushed or pulled into the desired position. The armrest can be horizontally tilted inwards and outwards, automatically locking into the desired angle.

Sharkoon Technologies GmbH
Grüninger Weg 48
35415 Pohlheim
Germany
© Sharkoon Technologies 2020http://sharkoon.com/links

Follow us on

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>