WIRELESS PACIFIC XRTG-EX XRTG Plus Gateway Installation Guide

June 12, 2024
WIRELESS PACIFIC

WIRELESS PACIFIC XRTG-EX XRTG Plus Gateway

WIRELESS PACIFIC XRTG-EX XRTG Plus Gateway

Package Content

Package Content
Red wire – Battery
White wire – Remote. PTT input

Installation Notes

  1. Plug XIC cable in securely.

  2. Carefully align cable with gasket.

  3. Make sure cable is not strained.

  4. Carefully attach cable exit cover.

  5. Check case and cable exit cover are flush.

  6. Attach face cover and check sealing.

  7. Attach Mounting bracket.

  8. Check attachment is secure.

  9. Attach antenna and check it is seated correctly.

Installation Notes

Recommended Handset – XRTG Plus Gateway Automatic Pairing

X10DR Elite Plus gateways, now incorporate a simplified pairing procedure to allow easier pairing of a replacement handset. This procedure negates the need to use of XRPB Pairing button. For best operation we recommend you first master reset the gateway (see below).

  1. / Put handset* into pairing mode – simultaneously press both blue buttons for about 5 seconds until you hear pairing tones.
  2. / Unplug the XIC series interface cable from the XCA series radio cable adaptor.
  3. / Turn off the connected host radio.
  4. / Now plug the XIC cable back in.

Automatic pairing will be enabled in the gateway for the next 30 secs.

Simply hold the desired “beeping” handset near the gateway and wait until confirmation tones sound. Where desired, turn Off the paired handset and pair another handset in the same 1/2/3/4 manner. When completed, power On the host mobile radio and power On all handsets. Wait until they connect and operate as desired.

*Note: factory unpaired or pairing erased handsets will power up in pairing mode.
Recommended Handset

How to erase XRTG-EX2

You can master reset/erase previous pairing on a XRTG gateway by removing the XRTG face cover and pressing the small pcb switch in the top right hand corner.
The LED will extinguish. Now press again and a series of blue/red flashes will occur. Keep holding until you see the LED flash 3-4 times very quickly and then revert to a very slow flash.
All prior pairing will now have been erased.

Customer Support

QR-Code

www.x10dr.com

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals