HAGOR 2385479 BrackIT Stand Scandio Instruction Manual
- June 12, 2024
- HAGOR
Table of Contents
HAGOR 2385479 BrackIT Stand Scandio
Product Information
The product is a technical device that requires careful handling during installation. It is important to protect the components and secure the installation area to prevent injuries and material damage. The materials included in the scope of delivery may not be suitable for all installation sites, so it is recommended to check and replace them with suitable materials if necessary. If you have any doubts or questions regarding the installation, it is advised to contact the manufacturer or trained specialists.
Scope of Delivery
- A: 1x
- B: 1x
- C: 1x
- D: 1x
- E: 1x
- F: 1x
- G: 3x
- H: 1x
- I: 1x
- J: 1x
- L: 4x
- M: 4x
- N: 4x
- O: 4x
- P: 4x
- M5x25 mm, M6x25 mm, M8x25 mm (screws)
- M6 (unknown component)
- Q: 22x
- R: 6x
- S: 2x
- T: 1x
- U: 1x
- V: 2x
- M8x20 mm, M5x10 mm, M5 (screws)
- M19 (unknown component)
- M5 (unknown component)
Dimensions
- Length: 1120 mm
- Width: 900 mm
- Height: 256 mm
- Additional Height: 125 mm
- Depth: 600 mm
- Additional Depth: 45 mm
- Additional Depth (max.): 25 mm
- Height Adjustment: 1335 – 1555 mm
- Total Length (max.): 2256 mm
- Internal Width: 765 mm
- Internal Height: 674 mm
- Total Width: 1120 mm
- Total Height: 1030 mm
Product Usage Instructions
- Ensure that you have received all the components mentioned in the scope of delivery.
- Handle the components carefully during installation to avoid any damage.
- If necessary, secure the installation area to prevent falling parts that can cause injuries or material damage.
- Check if the materials included in the package are suitable for the specific conditions at the installation site. If not, replace them with appropriate materials.
- If you have any doubts or questions regarding the installation process, it is recommended to contact the manufacturer or trained specialists for assistance.
Caution!
Technical devices are of considerable value. You should therefore handle the
components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can
cause injuries and material damage.
The materials included in the scope of delivery may not be suitable for the
special conditions at the installation site. Please check this in advance and
replace it with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions,
please contact us or other trained specialists.
Scope of delivery
INSTRUCTION
VESA 200 x 200 mm min. – VESA 900 x 600 mm max.
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]