OSD FORZA-850T Outdoor Omni Speaker Installation Guide
- June 12, 2024
- OSD
Table of Contents
OSD FORZA-850T Outdoor Omni Speaker
Amplifier and Receiver Consideration
The Omni speakers should be powered by an amplifier or receiver that provides a minimum of 10 watts per channel.
Optional Accessories – Outdoor Volume Control (OSD-OVC300)
Tools needed for installation
- Spade or trench tool
- Direct burial-rated speaker cable
- 16AWG………………………………………………………………………………100 ft
- 14AWG………………………………………………………………………100 – 150 ft
- 12AWG………………………………………………………………………150 – 200 ft
Specifications
- Design: All-weather high fidelity in ground 360 the sound speaker made with reinforced resin fiber
- Tweeter: 1” mylar whizzer cone
- Woofer: 8” with a 360 horizontal dispersion pattern
- Frequency Response: 42 Hz – 20 kHz
- Power Handling: 200W 70V Tap: 20W, 40W, 60W
- Impedance: 8 Ohm
- Sensitivity: 88 dB
- Dimensions: (L x W x H) 14” x 14” x 17”
- Gross Shipping Weight: 13.5 lbs
- Unit of Measure: 1 Piece
- Warranty: 1 Year
PRODUCT USAGE
-
Step 1
Evaluate the location of the speakers. Project the length of speaker wire you will run.
Note: when purchasing additional direct burial speaker wire, make sure the wire gauge is consistent. Omni speakers reproduce sound in a full 360 degree and a few speakers will cover a large area with sound if properly placed and spread out.
-
Step 2
Once you have decided on the locations for your in ground speakers, dig a trench about 5” leading from the speakers to the input source for the speaker cables. For the FORZA850T omni speaker, dig a trench hole approximately 16” in diameter and 10” deep for the speaker enclosure.
-
Step 3
Place the omni speaker in the hole you have dug. Run the direct burial wire through the trench to the loca-tion of the amplifier or receiver.
Please note: When connecting the additional wire be sure to use water tight wire connectors. -
Step 4
Use the Tap switch located on the speaker to select the appropriate setting best suited for your application. -
Step 5
Connect the wires from the omni speakers to the amplifier or receiver. Please make sure the polarity on the cables and the speakers are in sync.
Optional: Using an outdoor volume control makes it convenient for you to adjust the volume outside.
-
Step 6
Turn on your amplifier or receiver to test the speakers. If the speakers sound fine, refill the wire trench and cover the submerged part of the speaker.
Warranty Information
- All OSD Audio speaker products have (1) year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period OSD will replace any defective part and correct any defect in workmanship without charge for either parts or labor.
- OSD Audio may replace returned speakers with a product of equal value and performance. In such cases, some modifications to the mounting may be necessary and are not OSD’s responsibility.
- For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be performed by OSD. The unit must be returned to OSD at the owner’s expense and with prior written permission. Accidental damage and shipping damage are not considered defects, nor is damaged resulting from abuse or from servicing performed by an agency or person not specifically authorized in writing by OSD.
- OSD Audio sells products only through authorized dealers and distributors to ensure that customers obtain proper support and service. Any OSD product purchased from an unau-thorized dealer or other source, including retailers, mail over dealers and online sellers will not be honored or serviced under existing OSD warranty policy. Any sale of product by an unauthorized source or other manner not authorized by OSD shall void the warranty on the applicable product.
- Damage to or destruction of components due to application of excessive power voids the warranty on those parts. In these cases, repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, you must email customer service at RMA@os-daudio.com for a Returned Merchandise Authorization (RMA) number# then the unit must be shipped to OSD at the owner’s expense, along with a note explaining the nature of service required. Be sure to pack the speaker(s) in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit.
This Warranty Does Not Cover:
Damage caused by abuse, accident, misuse, negligence, or improper operation (installation)
- Any products that have been altered or modified
- Any product whose identifying number of decal, serial #, etc. has been altered, defaced or removed
- Normal wear and maintenance.
FREQUENTLY ASKED QUESTIONS
What is the OSD FORZA-850T Outdoor Omni Speaker?
The OSD FORZA-850T is an outdoor omni-directional speaker designed to provide even sound coverage in outdoor spaces.
An omni-directional speaker emits sound in a 360-degree pattern, which means it projects sound equally in all directions.
What's the power handling capacity of the FORZA-850T speaker?
The power handling capacity of the OSD FORZA-850T is typically around 300 watts RMS.
Can the FORZA-850T be used in both residential and commercial outdoor settings?
Yes, the OSD FORZA-850T can be used in various outdoor settings, including residential backyards, patios, and commercial spaces like restaurants and parks.
What is the frequency response range of the FORZA-850T?
The frequency response range of the OSD FORZA-850T is typically around 38Hz - 20kHz.
Is the FORZA-850T weather-resistant?
Yes, the OSD FORZA-850T is designed to be weather-resistant and can withstand outdoor conditions, including rain and UV exposure.
What is the material used for the cabinet of the FORZA-850T?
The cabinet of the OSD FORZA-850T is often made of durable, weather-resistant materials like composite resin.
How many drivers does the FORZA-850T speaker have?
The OSD FORZA-850T typically features a 8-inch woofer and four 3-inch midrange/tweeter drivers.
Can the FORZA-850T be mounted on the ground or on elevated surfaces?
Yes, the FORZA-850T can be mounted on the ground using stakes or on elevated surfaces like decks and poles using the appropriate mounting brackets.
Does the FORZA-850T require an external amplifier?
Yes, the OSD FORZA-850T requires an external amplifier to power the speakers.
What is the dispersion angle of the FORZA-850T?
The OSD FORZA-850T typically has a dispersion angle of 360 degrees, meaning it provides even sound coverage in all directions.
Can multiple FORZA-850T speakers be daisy-chained together?
Yes, you can daisy-chain multiple FORZA-850T speakers to cover larger outdoor areas with consistent sound.
Is the FORZA-850T suitable for background music or does it have the power for larger events?
The FORZA-850T is often used for background music in outdoor spaces, but it can also provide sufficient power for smaller events and gatherings.
How are the FORZA-850T speakers powered?
The FORZA-850T speakers are passive speakers, meaning they require an external amplifier to provide power.
Can the FORZA-850T be painted to match the surroundings?
Yes, the cabinet of the OSD FORZA-850T can typically be painted to match the aesthetic of the outdoor environment.
DOWNLOAD THE PDF LINK:OSD FORZA-850T Outdoor Omni Speaker Installation Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>