gemini EVO 810 Diode Laser User Guide
- June 12, 2024
- gemini
Table of Contents
gemini EVO 810 Diode Laser
OVERVIEW – ACTIVATION PEDAL
CONTROLS, OPERATION & USE
20 – ADD NEW ACTIVATION PEDAL OR RECONNECT / PAIR – BLUETOOTH CONNECTION
In certain instances, your office may need to have an additional Activation Pedal with the same Gemini EVO device, or you may lose your Bluetooth pairing connection. In either case, follow the instructions below to properly reconnect and establish pairing Bluetooth connection with your Gemini EVO unit. For a successful pairing, the sequence below must be followed:
-
PRESS THE BLUETOOTH BUTTON
Icons will flash indicating Bluetooth pairing is enabled
-
PAIRING
Press and hold the HOME icon for 5 seconds.
“ Bluetooth Pairing Enabled”
-
Activation Pedal automatically connects to your Gemini EVO device.
WHAT IS IN THE BOX
Replaces an image from page 6
Activation Pedal + 1x rechargeable Li-Ion Battery + micro USB Cable
QUICK START
Replaces an image from pages 13 and 16
Install the provided Li-Ion battery into the wireless activation pedal
RECHARGEABLE LI-ION BATTERY – 18650
Your Gemini EVO activation pedal comes with a rechargeable Li-Ion battery. Use
the supplied micro-USB cable to fully charge the battery before use by
connecting it to the USB port on any computer or by using an AC to USB wall
charger plug. The indicator near the battery charging port will be red when
charging and blue when fully charged. Note charging time will take 5-6 hours.
Customer Support
800.552.5512 |ULTRADENT.COM
Manufactured by Azena Medical, LLC. 3021 Citrus Circle, Suite 180, Walnut
Creek, CA 94598 USA. Made in the USA of U.S. and imported components.
Distributed by Ultradent Products Inc., 505 West Ultradent Drive, South
Jordan, Utah 84095
Documents / Resources
|
gemini EVO 810 Diode
Laser
[pdf] User Guide
EVO 980, EVO 810, EVO 810 Diode Laser, Diode Laser, Laser
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>