ZKTeco Rots-3 Stand Wall Bracket Installation Guide

: June 12, 2024
: ZKTECO

Table of Contents

ZKTeco Rots-3 Stand Wall Bracket
Product Information
Product Usage Instructions
Dimensions
Installation Diagram
How to put the cables through the wire holes？
How to install the mounting bracket on the wall?
How to connect the device with the mounting bracket?
Mounting Hole Description for Compatible Models
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZKTeco Rots-3 Stand Wall Bracket

Product Information

The Rots-3 Stand is a product manufactured by ZKTeco. Please note that due to regular upgrades of systems and products, ZKTeco cannot guarantee exact consistency between the actual product and the written information in this manual.

Dimensions

Top View: 2.224″ (56.5mm)
Side View: 1.772″ (45.0mm)
Adjustable Angle: 1.969″ (50.0mm)
Wall Mounting Holes: 2.559″ (65.0mm)
Back Plate Mounting Holes: 3.189″ (81.0mm)
Wiring Hole: 3.465″ (88.0mm)

Installation Diagram
The Rots-3 Stand consists of a Back Plate, Wiring Hole, Hexagon Socket Screws, Adjusting Nut, and Bottom Cover.

Product Usage Instructions

How to put the cables through the wire holes

Remove the three screws from the bottom cover using a Phillips screwdriver.
Take off the bottom cover.
Pass the cables through the wire holes before placing the back plate on the base.
Insert the cable through the wire hole and reattach the bottom cover with the screws.

Note : The device has two wire holes, which users can choose according to their needs.

How to install the mounting bracket on the wall

Drill four mounting holes at suitable locations on the wall. The recommended height from the ground is 1.5 meters, which can be adjusted according to the actual situation.
Securely fix the mounting bracket on the wall using four wall mounting screws.

How to connect the device with the mounting bracket

Refer to the back plate of compatible models (e.g., ProFaceX, SpeedFace V4L, SpeedFace V4LM1, SpeedFace V3L, SpeedFace V5/V5L, Elite Series).
Choose different mounting holes for fastening the device based on the back plate of the compatible model.

Note : The location shown in the manual is for reference only. Choose the mounting holes based on the physical object.

Please refer to the actual purchase for accurate pictures and further information.
ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China.
Phone: +86 769 – 82109991
Fax: +86 755 – 89602394
Website: www.zkteco.com

Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.

Dimensions

Installation Diagram

How to put the cables through the wire holes？

Step 1: Remove the three screws from the bottom cover with a Phillips screwdriver.
Step 2: Remove the bottom cover.
Step 3: Pass the cables through the wire holes before you put the back plate on the base.
Step 4: Put the cable through the wire hole and then install the bottom cover agian with the screws.
Note : The device has two wire holes, which users can choose according to their needs.

How to install the mounting bracket on the wall?

Step 1: Drill four mounting holes at suitable locations on the wall. The recommended height from the ground is 1.5 meters, which can be adjusted according to the actual situation.
Step 2: Fix the mounting bracket on the wall using four wall mounting screws.

How to connect the device with the mounting bracket?

Step 1: Pass the cables through the back plate.
Step 2: Identify the correct mounting holes and fix the back plate on the mounting bracket using the countersunk screws.
Step 3: Connect the cable to the device before attach the device to the back plate.
Step 4: Attach the device to the back plate with a security screw.
Step 5: Adjust the device to a suitable angle and lock the hexagonal screws on both sides.
Step 6: Install the bottom cover with the screws on the mounting bracket, as shown in the figure below.

Note : The pictures in this manual are for reference only, please refer to the actual purchase.

Mounting Hole Description for Compatible Models

Compatible models:
ProFaceX, SpeedFace V4L, SpeedFace V4LM1, SpeedFace V3L, SpeedFace V5/V5L, Elite Series.
Please choose different mounting holes for fastening the device according to the back plate of compatible models as shown below:

NOTE:
The location shown above is for reference only, choose the mounting holes based on the physical object.

ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China.
Phone : +86 769 – 82109991
Fax : +86 755 – 89602394
www.zkteco.com