LEMAX LM-JW-51.2V200AH Wall-Mounted LFP Battery User Manual

June 12, 2024
LEMAX

Wall-mounted LFP Battery User Manual

Product Parts

Size

LEMAX LM-JW-51.2V200AH Wall-Mounted LFP Battery - Size

Installation Steps

  1. Fixed wall upper and lower bracket according to the measured spacing
  2. Hold the handles on both sides and slowly hang the battery on the bracket
  3. Keep install distance of 20cm between top. bottom, left and right. right in front of 50 cm
  4. Check It whether keep balance

Keep Install distance

LEMAX LM-JW-51.2V200AH Wall-Mounted LFP Battery - Wall

Product Details

LEMAX LM-JW-51.2V200AH Wall-Mounted LFP Battery - Fig

If multiple energy storage battery modules are used in parallel, the address of the energy storage battery module needs to be set. The address is set to 1-4,and the address of each module cannot be repeated.

Address Dial switch position Explanation
#1 #2 #3
0 OFF OFF
1 ON OFF
2 OFF ON
3 ON ON
4 OFF OFF
5 ON OFF
6 OFF ON
7 ON ON
8 OFF OFF
9 ON OFF
10 OFF ON
11 ON ON
12 OFF OFF
13 ON OFF
14 OFF ON
15 ON ON

Parallel Connection Diagram

LEMAX LM-JW-51.2V200AH Wall-Mounted LFP Battery -
Bettrry

WARNING: Risk of Fire, explosion, or burns:

  1.  DO NOT short the battery terminals

  2. DO NOT Incinerate, Crush or Disassemble

  3. DO NOT reverse connections (polarity) from charger or battery

  4. DO NOT operate the battery beyond Published voltage and current

  5. DO NOT operate battery beyond published temperature limits
    a. Operating Temp Charge -20°C to 55°C (-4°F to 131°F)
    b. Operating Temp Discharge -20°C to 60°C (-4°F to 140°F)

  6. DO NOT expose to temperature above 140°F

 Storage Conditions

  1. When the battery pack to be long-term stored, charge the battery pack arrive to about 60% capacity once 3 months
  2. The battery pack and charger should be stored in clean, dry and ventilated place
  3. Avoid contacting with corrosive materials and be away from fire and heat

Technical Data

Specification Description
Model Number BG48100
Total Energy 5KWh
Battery Type LiFePO4
Normal Voltage 51.2V
Normal Capacity 100Ah
Max.Charge/ Discharge Current 100A
Cycle Life > 6000cycle
Communication Interface CAN / RS232/ RS485
Dimension 635″400*165mm
Weight 46kg
IP Grade (optional) IP 21
Inverter Match all hybrid and off grid inverter brands in the world
Installation Floor/Wall mounted
Supply Ability 5000 Pieces per Month
Certificates CE, RoHS,UN38.3,MSDS,ISO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals