WATERLINE DESIGN Spreader Boots Instructions
- June 12, 2024
- WATERLINE DESIGN
Table of Contents
Spreader Boots
How to choose spreader boots
Types
Our spreader boots comes in 4 differents sizes. They are very flexible in
size. We have choosen to have our table from the the width of the spreaders.
This is not a 100% science since there is so many different spreaders out
there. Due to the flexibilty in the spreader boots our 4 sizes will cover
them. If you find your size to be in the middle choose the smaller. Bigger is
not better in this case.
To choose the right siz is done in a few steps
1. Measure your spreader arms
Measure the spreader arms in the middle. Not the tips as is the first choice.
The middle of the spreader arms is the best place to have a measure when you
look for all spreader arms and types.
2. Choose your rig
There is two types of rigs. Continuous rig and Linked rig. The linked rig has
a larger spreader tip due to all linking etc.
(needs a larger size of spreaer boot).
3. Choose on of the four spreader boots
FITTING TABLE
|
---|---
1. Measure width| 2. Type
Fitting
- Measure spreader arm (in the middle, not the fip)
- What kind of rig: Continuous or linked rig
- Choose from table
| FITTING TABLE | Continuous rig | Linked rig |
|---|---|---|
| 55-95 mm (2 3/16″-3 3/8″) | 1050 Small | |
| 95-122 mm (3 3/8″-4 13/16″) | 1052 Medium | |
| 74-95 mm (2 7/8″-3 3/8″) | 1052 Medium | |
| 105-122 mm (4 1/8″-4 13/16″) | 1054 Large | |
| 122-154 mm (4 13/16″-6″) | 1054 Large | 1056 X-Iarge |
Set up the spreader boots
The spreaders are sold in pair. One for each side (port and starboard).
- Fold the spreader boot over the spreader.
- Use the long Vecro band covered with leather.
- Cut of the right length of leather/Vecro band.
WATERLINE DESIGN by BÅTSYSTEM AB
Traneredsvägen 112, 426 53 Västra Frölunda, Sweden.
www.batsystem.com
info@batsystem.se