Govee Life H5126 Smart Mini Double Button Switch User Manual
- June 12, 2024
- Govee Life
Table of Contents
Govee Life H5126 Smart Mini Double Button Switch
Included in the Box
The Govee Smart Button Switch supports two independent single dicks to trigger actons. it can be nixec on moscingoor surraces with donesive tase. based on the bueroorn communication win sovee’s unique astrouted gateway, it can transfer the signal by clicking the Dution as a conditionto never quomation ano execute commanos from a Govee products to achieve multinle intelligent scenarios
Part Names
- a. Indicator Light
- b. Button 1
- c. Button 2
- d. Bottom Cover
- e. Open Slot
- f. Battery
- g. Insulation Sheet
Controls
Long press to set the function
Press and hold Button 1 for 5 seconds. When the indicator light keeps
flashing, it means that the device has entered the Bluetooth Broadcast Mode.
Please follow the in-app instructions to complete pairing.
Note: The broadcast will last for 30 seconds and then stop Or you can choose to exit the Bluetooth Broadcast Mode by clicking Button1.
Functions
Single-click to Trigger Signals
After completing pairing and function settings, click Button 1 or Button 2.
When the indicator light flashes red once, it means the signal is already
sent, and your instruction is triggered. You can follow the in-app
instructions to complete the function settings.
Note: Please do not press the same button in a quick manner. There should be a 1.5-second gap between two successive clicks of the same button.
Indicator Status
Getting Started
-
Open the packaging. Open the bottom cover from the open slot as shown in the picture. Pull out the insulation sheet and tighten the bottom cover up
-
Press and hold Button 1 for 5 seconds to enter the pairing mode. Please follow the in-app instructions to complete pairing.
Note: -
For downloading Govee Home App and detailed pairing steps, please refer to:
Govee Home App -> Downloading Govee Home App & Pairing with Govee Home App. -
Effective Communication Distance Verification: After completing the pairing, you can verify it in the app.
Note:
- In order to fix the product on the surface, it is recommended to tear off the included adhesive tape to stick it to the bottom of the base, then tear off the liner and fix the product to the surface.
- Please ensure the surface is clean and dry.
- For indoor use only.
- Low electricity might occur due to low voltage when the button cell is in a low-temperature environment (below 0°C), which might affect the battery life.
Govee Home App
You can access more features using Govee Home App.
Downloading Govee Home App
To download Govee Home App, scan the QR code or search for “Govee” in the
Apple App Store® (iOS) or Google Play Store (Android).
Note: Choose “Allow” to the permissions requested when opening Govee Home App for the first time. These permissions allow the app’s features to function normally and are not used to record personal, private information. Due to ongoing updates, Govee Home App may be slightly different than shown in this manual. In case of any differences, always follow the in-app instructions.
Pairing with Govee Home App
- Turn on your smartphone’s Bluetooth.
- Open Govee Home App, tap the “+” icon in the top right corner and search for “H5126.”
- Tap the device icon and follow the on-screen instructions to complete pairing.
Note: Govee Home App is being continually updated and its features do expand
Troubleshooting
The troubleshooting section below is for solving frequently asked questions. If your problem persists, please contact customer support.
For Govee Smart Button Switch
For App & Connectivity
-
Cannot connect to Govee Home App.
-
Make sure your smartphone is powered on and is not connected with other Bluetooth devices.
-
Enable the smartphone’s Location Services.
-
Try connecting with another smartphone.
-
Make sure your app is updated to the latest version.
-
Make sure you connect to your Wi-Fi router’s 2.4GHz network and that the network is working correctly.
-
Make sure the Wi-Fi password you entered is correct.
-
Shorten the distance between the switch, distributed gateway, and the smartphone.
-
Make sure your switch and the distributed gateway are located away from appliances that produce electromagnetic radiation (e.g. microwave ovens, refrigerators, etc.)
-
If you are using a VPN, try turning it off and then connecting the
switch. -
Disable portal authentication for your Wi-Fi network. If portal authentication is enabled, this switch will not be able to access your Wi-Fi network, and setup will fail, Portal authentication means that you need to sign in to your Wi-Fi network through a web page before you can use the Internet.
-
Cannot find the device on Bluetooth Device Nearby page of the app.
-
The switch may be connected with another smartphone.
Disconnect it from the other smartphone first. -
The switch is offline.
- Make sure that the switch has sufficient battery power and that the distance between the distributed gateway and the switch is within 55 meters/180 feet.
- Make sure your router is connected to the internet, and your smartphone’s network connection is working.
- If the Wi-Fi password has been changed, the switch and distributed gateway will automatically go offline. Try to connect them to the network again.
- Delete the offline switch from Govee Home App, then add and reconfigure the switch again in the app.
Appendix
- After-Sales Service
- Warranty: 12-Month Limited Warranty
- Support : Lifetime Technical Support
- Email: support@govee.com
- Official Website : www.govee.com
Specifications
Compliance Information
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Responsible party:
- Name: GOVEE MOMENTS(US) TRADING LIMITED
- Address: 2501 Chatham Rd Suite R Springfield IL 62704
- Email: support@govee.com
- Contact information:https://www.govee.com/support
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Be aware discharged battery may cause fire or smoke, tape the terminals to insulate them
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
- Shenzhen Qianyan Technology LTD is under license.
- The trademark GoveeLife has been authorised to Shenzhen Qianyan Technology LTD.
- Copyright ©2021 Shenzhen Qianyan Technology LTD. All Rights Reserved.
Model: H5126
Smart Button Switch
Govee Home App
For FAQs and more information,
please visit:www.govee.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>