ZKTeco ML200/ML300 Series Digital Fingerprint Keypad Smart Lock User Manual
- June 12, 2024
- ZKTECO
Table of Contents
ML200/ML300 Series Digital Fingerprint Keypad Smart Lock
Product Information:
ML300
The ML300 is an entry-level fingerprint keypad smart lock with
Bluetooth communication. It features a compact design and smart
core, providing a better user experience. It can be easily
installed on the existing lever or knob of a single-hole door. The
lock setup can be completed in just a few minutes.
The ML300 comes with an additional Bluetooth Gateway that allows
remote unlocking of the door, checking log history, and sharing
temporary or dynamic passcodes via the ZSmart App. It also supports
voice commands for unlocking when paired with a compatible Amazon
Echo or Google Nest device.
ML200
The ML200 is an entry-level digital keypad smart lock with
Bluetooth communication designed for semi-outdoor scenarios. It has
a water-resistant design to ensure reliable performance in rainy
situations. Installation is quick and easy, requiring just a few
steps to set up on the existing lever or knob of a single-hole
door.
Similar to the ML300, the ML200 comes with a Bluetooth Gateway
for remote unlocking, log history checking, and passcode sharing
via the ZSmart App. It also supports voice commands when paired
with a compatible Amazon Echo or Google Nest device.
Comparison of ML200 / ML300 Series:
Model | ML300 | ML200 |
---|---|---|
Category | Fingerprint Keypad Smart Lock | Digital Keypad Smart Lock |
Identification Mode | User Capacity Fingerprint Sensor | Smart Phone and |
Passcode
Communication| Bluetooth 5.0| Bluetooth 5.0 Supported
Water Resistance| N/A| Water-resistant
Battery Life| Up to 1.5 years (about 10,000 access)| Up to 1.5 years (about
12,000 access)
Product Usage Instructions:
Installation & Setup:
To install the ML300 or ML200 smart lock, follow the steps
below:
Method 1 – Installing with Double Sided Tapes:
-
Clean the surface of the door where you want to install the
lock. -
Peel off the backing of the double-sided tape on the back of
the lock. -
Align the lock with the desired position on the door and press
firmly to secure it.
Method 2 – Installing with Stud (requires drilling an extra
hole):
-
Measure and mark the desired position for the lock on the
door. -
Drill a hole at the marked position.
-
Insert the lock into the hole and secure it with screws.
Pairing the Lock with App:
To pair the smart lock with the ZSmart App, follow these
steps:
-
Download and install the ZSmart App on your mobile phone.
-
Ensure that the lock is within Bluetooth range of your
phone. -
Open the ZSmart App and follow the on-screen instructions to
create an account and set up the lock. -
During the setup process, grant Bluetooth permission to the
app.
Note: The lock may have a factory default mode that needs to be
changed during the setup process. Refer to the user manual for
specific instructions.
Main User Interface:
Once the lock is paired with the ZSmart App, you can access
various features through the main user interface:
-
Battery Level: Shows the real-time remaining battery level of
the lock. -
Bluetooth / Remote Access: Enables remote unlocking and access
control via Bluetooth connectivity.
Refer to the user manual for detailed instructions on using
additional features and functionalities of the ML300 or ML200 smart
lock.
Simplify Your Life with Biometric & IoT Technology
ML200/ML300 Series
Designed by Garrett Li
Contents
1 Overview 2 Product Introduction 3 Installation & Setup 4 Comparison &
Summary 5 Q & A Time
Part 01
Overview
About ML300
ML300 is a entry-level fingerprint keypad smart lock with Bluetooth
communication. With the compact design and smart core, it amazingly brings a
better user experience in all aspects. It’s super easy to install on the
existing lever or knob of a single-hole door directly, and finish the lock’s
setup with just a few processes in minutes.
The additional Bluetooth Gateway allows you to unlock the door lock remotely,
check the log history and share the temporary or dynamic passcode via ZSmart
App. More importantly, you can unlock the lock with the voice commands when
paired with a compatible Amazon Echo or Google Nest device.
About ML200
ML200 is a entry-level digital keypad smart lock with Bluetooth communication
for semi-outdoor scenarios. With the water-resistant design in all aspects, it
reliably secures the front door in some rainy situations. It’s super easy to
install on the existing lever or knob of a singlehole door directly, and
finish the lock’s setup with just a few processes in minutes.
The additional Bluetooth Gateway allows you to unlock the door lock remotely,
check the log history and share the temporary or dynamic passcode via ZSmart
App. More importantly, you can unlock the lock with the voice commands when
paired with a compatible Amazon Echo or Google Nest device.
Comparison of ML200 / ML300 Series
Model
ML300
ML200
Product Photo
Category Identification Mode
User Capacity Fingerprint Sensor
Communication Water Resistance
Battery Life
Fingerprint Keypad Smart Lock Smart Phone, Fingerprint and Passcode
100 Capacitive (silicon)
Bluetooth 5.0 N/A
Up to 1.5 years (about 10,000 access)
Digital Keypad Smart Lock Smart Phone and Passcode
100 N/A Bluetooth 5.0 Supported Up to 1.5 years (about 12,000 access)
Features
ML300
ML200
ZSmart App
Applicable Scenarios
ML300
ML200
Part 02
Product Introduction
How it Works
Appearance
4 * Alkaline AA Batteries BLE5.0 Communication
Handle (reversible design)
Physical Button Design Fingerprint Sensor (only for ML300)
Mechanical Key Hole (hidden) Micro-USB Interface
Basic Functions
User Mgt.
Random Password
Low Battery & Illegal Attempts Alert
Emergency Charging
Emergency Mechanical Key
Bluetooth Connectivity
Remote Access
Voice Control
Specifications
ML300
Specifications
ML200
Accessories
Bluetooth Gateway
/ Features
n Unlock and manage the lock from anywhere n Works with Amazon Alexa and
Google Assistant n Receive real-time notification n Support up to 128 sub-
devices n Easy and fast network configuration; Full 128-bit encryption
/ Configuration
Wi-Fi
Cloud Server
Wi-Fi Router
Mobile Phone
Bluetooth Gateway
Part 03
Installation & Setup
Installation Diagram
Method 2
Installing with Stud * requires drilling an extra hole
Method 1
Installing with Double Sided Tapes
Pairing the Lock with App
Factory Default Mode Bluetooth Permission
Main User Interface
Battery Level
Show the real-time remaining battery
Bluetooth / Remote Access
Press the button to unlock the door in a few seconds
Smart Alerts
Receive the real-time notifications of low battery, illegal verification
attempts and hijack alarm
Lock’s Setting
Modify the device’s name or photo
Dynamic Passcode
Swipe right to enter the interface of dynamic passcode
More Functions
Opening Records, Smart Action, Set Temporary PW, User Mgt.
Main User Interface
Permission Settings
Modify the user’s unlocking permissions
User Data
Register or modify the FP or PW
Passcode Setting
Supports custom or random generation
Details Setting
Set the name & effective time
Schedule
Set the schedule for specific users
Programming the Lock in Standalone Mode
-
Adding the Smart Gateway
-
Connecting to Amazon Alexa or Google Assistant
Part 04
Comparison & Summary
Cloud-based IoT Smart Lock Series
Model
ML200
ML300
DL30Z
Product Photo
TL300Z
New AL40
(Released in Jan, 2021)
Lock Body Identification Mode Fingerprint Sensor
American Standard Single Latch German Standard Mortise (optional)
Smart Phone and Passcode
Smart Phone, Fingerprint and Passcode
Smart Phone, Passcode and Card
N/A
Capacitive (silicon)
N/A
Card Reader
N/A
Audio Prompt
N/A
Communication
Bluetooth 5.0
Zigbee
Voice Control
Amazon Alexa, Google Assistant
N/A
Color Options
Silver / Gray
Silver
China Standard Anti-theft Mortise
Smart Phone, Fingerprint, Passcode and Card
Capacitive (silicon)
American Deadbolt
Smart Phone, Fingerprint, Passcode and Card
Capacitive (silicon)
IC Card & NFC Supported
English, Spanish, Portuguese
Zigbee
Bluetooth 5.0
N/A
Amazon Alexa, Google Assistant
Dull Nickel / Gun Black
Silver
Mobile Application of Residential Lock
App Name Software Design Communication
Main Functions
Additional Devices Smart Home System Supported Models
ZK SmartKey
Standalone
BLE 4.0
Unlock via Bluetooth Manage Users Check Records
Modify Lock Settings Share Temporary PW (1 hour to 4 days)
N/A
N/A
HBL100B / HBL200B / TL300B / TL400B / AL40B / AL30B / DL30B / AL20B / AL10B
ZSmart
Cloud-based
BLE5.0 / Zigbee / Wi-Fi
Unlock via Bluetooth / Remote Control Manage Users
Check Records in Real Time Set Dynamic PW (5 min) / Temporary PW (unlimited)
Modify Lock Settings Receive Instant Notifications
Work with Voice Assistant
Zigbee / Bluetooth Gateway
Amazon Alexa, Google Assistant
DL30Z / TL300Z / ML200 / ML300 / New AL30 / New AL40 (coming soon)
Private Houses / Apartments
Ø Easy installation and fast network configuration Ø Remote one-click
unlocking Ø Check log history at any time Ø Work with Amazon Alexa and Google
Assistant Ø Smart real-time notifications for home security
Short-term Rental
Ø Manage multiple locks remotely in a smartphone Ø Share temporary passcode to
guests or cleaners Ø Receive real-time notifications of low battery and
offline Ø Suitable for small-scale short-term rental that not
required web-based management software
Summary
Ø Get Full Control of Your Lock
Unlock and manage the lock from anywhere via a smart phone
Ø Super Easy Operation
Easier configurations and setup
Ø Smart Alerts for Higher Security
Low battery, illegal verification attempts and, hijack and offline
Ø Fit for All Door Open Direction
American Standard Single Latch or German Standard Mortise
Ø Better User Experience
Enjoy the smooth and stable experience of mobile application
Ø Cost-effective
Q & A Time
Thank You !
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>