EGO POWER ZT4200L Electric Zero Turn Mower Instruction Manual

June 12, 2024
Ego Power

EGO POWER ZT4200L Electric Zero Turn Mower

EGO-POWER-ZT4200L-Electric-Zero-Turn-Mower-
product

Product Information

The Rear Bumper (Model Number: AMB1000) is designed to be exclusively compatible with EGO POWER+ Electric Zero Turn Mower models ZT4200L, ZT4200L- FC, ZT4200S, ZT4200S-FC, ZT5200L, and ZT5200L-FC. It provides additional protection for the rear of the mower without compromising its towing capability.

WARNING : Before attaching the bumper and operating the mower, it is essential to read the operator’s manual included with your mower.

WARNING : The loaded weight of a cart towed by the EGO POWER+ Electric Zero Turn Mower must not exceed 250 lbs. (113 kg).

Product Usage Instructions

Packing List

Part Name Figure Quantity
Rear Bumper 1
Hex Flange Bolt 3
Flange Nut 1

Tools Needed (Not Included)

  • Two 1/2 in (13mm) wrenches or adjustable wrenches.
  • Impact wrench with a 1/2 in (13 mm) socket (recommended to expedite the installation process).

Installation

WARNING : To reduce the risk of injury or property damage, disconnect the battery packs from the mower and engage the parking brake before proceeding with the installation.

  1. Place the rear bumper onto the hitch on the back of the mower as shown in Fig. a
  2. Align the two horizontal slots in the bumper with the holes in the mower, then insert two flange bolts. Use a 1/2 in (13 mm) wrench to loosely secure the bumper, but do not tighten the bolts completely yet (Fig. a).
  3. Align the vertical hole in the rear bumper with the hole in the mower’s hitch. Insert the remaining bolt and nut (Fig. a).
  4. Securely tighten all three bolts and the nut (Fig. b).

Note : Please refer to the provided figures for visual guidance during the installation process.

If you have any further questions or concerns, please contact EGO Customer Service at 1-877-346-9876 (1-877-EGO- ZTRM) or visit EGOPOWERPLUS.COM. You can also reach out to EGO Customer Service at the following address:

EGO Customer Service 769 Seward Ave NW #102 Grand Rapids, MI 49504

AMB1000 is exclusively compatible with EGO POWER+ Electric Zero Turn Mower ZT4200L/ZT4200L-FC/ ZT4200S/ZT4200S-FC /ZT5200L/ZT5200L-FC.

The rear bumper provides additional protection for the rear of the mower without sacrificing the mower’s towing capability.

  • WARNING : Read the operator’s manual included with your mower before attaching the bumper and operating the mower.
  • WARNING : The loaded weight of a cart towed by EGO POWER+ Electric Zero Turn cMower must not exceed 250 lbs. (113 kg).

PACKING LIST

EGO-POWER-ZT4200L-Electric-Zero-Turn-Mower-fig-1
\(1\)

Tools Needed (Not Included)

  • Two 1/2 in (13mm) wrenches or adjustable wrenches.
  • Impact wrench with a 1/2 in (13 mm) socket (recommended to get the job done faster

INSTALLATION

WARNING : To reduce the risk of injury or property damage, disconnect the battery packs from the mower and engage the parking brake.

  1. Place the rear bumper onto the hitch on the back of the mower as shown in Fig. a
  2. Align the two horizontal slots in the bumper with the holes in the mower, then insert two flange bolts and use a 1/2 in (13 mm) wrench to loosely secure the bumper but do not tighten the bolts completely yet (Fig. a)
  3. Align the vertical hole in the rear bumper with the hole in the hitch of the mower, and insert the remaining bolt and nut (Fig. a)
  4. Securely tighten all three bolts and the nut (Fig. b)

1-877-346-9876 (1-877-EGO-ZTRM) EGOPOWERPLUS.COM

EGO Customer Service 769 Seward Ave NW #102 Grand Rapids, MI 49504

10/2022

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Ego Power User Manuals

Related Manuals