ALCAD 97201659B 2 Wire Kit Video Door Entry Systems User Manual

**ALCAD 97201659B 2 Wire Kit Video Door Entry Systems

**

PROXIMITY KEYS

5 proximity keys are included: yellow and red configuration keys; and 3 door opening blue keys.

Important: The yellow and red keys are used to register new keys, keep them in a safe place and do not lose them, the are irreplaceable.

How to open the door

Pass a door opening key near the entrance panel reader marked iACCESS. The
entrance panel will emit a Beep and the door will open.
Note: Do not move the key in front of the reader.

How to register new keys

To register new door opening keys, you need the yellow key.

1. Pass the yellow key through the reader. A short beep indicates setup mode is activated.
2. Pass one by one all the keys you want to register, a beep confirms the registration of each key.
3. When finished, pass the yellow key again, a long beep indicates setup mode is disabled.

How to remove all keys

The system allows all door opening keys to be removed, you need the red key.

1. Pass the red key through the reader. A short beep indicates that erase mode is activated.
2. Pass the red key through the reader again. A long beep confirms that all keys have been remove .

RECEIVING CALLS

Basic functions

When you receive a call from the entrance panel:

1. Tap to answer the call
2. Tap or to open the corresponding door
3. Tap to end the call

Additional functions

Take a photo
Record video (Only with memory card)
Answer/ end the call
Door opening 1
Door opening 2
Screen and sound settings

Immediately ends the call and returns to the main menu

INTERCOMINICATION CALL

In the case of having more than one monitor in the apartment, you can make
intercom calls, that is, from one monitor to another.

1. Tap on the screen to activate it
2. Tap to launch a call to the other monitors
3. From another monitor, tap in the middle of the screen to reply
4. Tap to end the call

ACTIVATION OF COMMUNICATION FROM THE MONITOR

To activate communication with the entrance panel from the monitor:

1. Tap on the screen to activate it
2. Tap to activate the image
3. Tap to start communication
4. Tap or   to open the corresponding door
5. Tap to end the communication

PHOTOS AND VIDEOS

The monitor is capable of taking photos and videos of the images captured by the entrance panel camera. To record video you need to insert a micro SD card(not included) in the bottom slot of the monitor.

Photo and video recording methods

There are 2 methods for taking photos and videos: automatic mode, which
automatically records all calls received, and manual mode, which allows taking a photograph or video at will.

Automatic recording of photos or videos

Automatic recording allows you to record all the calls received from the entrance panel, whether the calls are answered or not. To activate this function follow these steps:

1. Tap on the screen to activate it
2. Tap to access the settings
3. Tap
4. Then select one of these three options

If you want to record a photo of all received calls
If you want to record a video of all received calls
If you do not want to record received calls

Manual recording of photos or videos

Manual recording of photos or videos allows you to save images during a
conversation with the entrance panel. Once communication with the entrance panel is established, tap on:
To take a photo
To make a video

View stored photos and videos

To view stored photos and videos:

1. Tap on the screen to activate it
2. Tap or a view photos or videos respectively
3. Delete stored photos and videos
   While viewing a stored photo or video (see previous point):

Delete stored photos and videos

While viewing a stored photo or video (see previous point):

1. Tap  
2. Confirm whether or not you want to delete this photo or video

DO NOT DISTURB MODE (SILENCE)

Do Not Disturb mode (Mute) mutes tone call, but you can also continue to receive calls. To configure it:

1. Tap on the screen to activate it
2. Tap
3. Tap:

YES To activate do not disturb mode (Silence)
NO To deactivate do not disturb mode (Silence)
TIME To configure a time slot where do not disturb mode (Silence) will be daily activated.

SETTINGS

To access the Settings menu:

1. Tap on the screen to activate it
2. Tap

Ringtone melody

1. Enter the Settings menu and tap
2. Select the preferred melody

Screen and sound settings

1. Enter the Settings menu and tap
2. Adjust the brightness, contrast, color saturation, as well as the ringtone and conversation volume.

Language setting

1. Enter the Settings menu and tap
2. Select your language

Setting date and time

1. Enter the Settings menu and tap
2. Set the Date and time

Automatic recording of photos or videos

Automatic recording allows you to record all the calls received from the entrance panel, whether the calls are answered or not. To activate this function follow these steps:

1. Enter the Settings menu and tap
2. Then select one of these three options:
   If you want to record a photo of all received calls
   If you want to record a video of all received calls
   If you do not want to record received calls

CUSTOMER SERVICE

ALCAD Electronics, S.L.
Pol. Ind. Arreche-Ugalde, 1
Apdo. 455 | 20305 IRUN – Spain
Tel. (+34) 943 63 96 60
info@alcad.net
www.alcadelectronics.com

References

• ALCAD ELECTRONICS | ALCAD Home, ALCAD Facility

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>