BRAUN BC26-DCF Wall Clock Instruction Manual

June 13, 2024
Braun

BRAUN BC26-DCF Wall Clock

BRAUN-BC26-DCF-Wall-Clock-product

Product Information

  • Product Name: BC26-DCF
  • Languages: English, Deutsch, Italiano, Nederlands, Dansk
  • Guarantee: 2 years against material and workmanship defects (except battery)
  • Radio Controlled Operation: DCF version (Germany & European countries)
  • Manufacturer: ZEON LIMITED UK (under license from The Procter & Gamble Company)
  • Manufacturer’s Website: www.braun-clocks.com

Product Usage Instructions

Battery Installation

  1. Insert 1xAA (1.5V) battery observing the correct polarity, as shown on the diagram.

Radio Controlled Operation (DCF version)
This Braun clock is set and controlled automatically by DCF radio signal. The DCF radio time code signal is broadcast from Frankfurt, Germany. The coverage of the DCF signal is the whole of Germany. The time code signal can be received up to 1500km from Frankfurt. This covers most of Central and Western Europe.

Guarantee
The product comes with a 2-year guarantee against material and workmanship defects, except for the battery. The guarantee is valid in countries where the clock is officially being sold. Broken or cracked lens screens are not covered under the guarantee.

Braun Helpline
If you encounter any problems with your product, please check your local service center at:

WARNING! This product is covered by the Waste Electrical and Electronic Equipment (WEEE) directive. It should not be discarded with normal household waste but taken to your local collection center for recycling.

EU Declaration of Conformity
We, ZEON LIMITED UK, the manufacturer of Braun Watches & Clocks under license from The Procter & Gamble Company, hereby declare that model BC26-DCF conforms to Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be viewed on our website at www.braun-clocks.com.
Frequency band: 77.5KHz,
Transmit power: 0 dBm.
Certain trademarks used under license from The Procter & Gamble Company or its affiliates. 

BRAUN-BC26-DCF-Wall-Clock-01

Battery precautions

  1. Do not use rechargeable batteries.
  2. Use only alkaline AA batteries of the same or equivalent type.
  3. Insert batteries with the correct polarity
  4. Keep batteries away from children.
  5. Dispose of exhausted batteries according to local legal requirements. Do not dispose of them by throwing away with normal household rubbish.
  6. Avoid short circuiting the contacts in the battery compartment and battery terminals.
  7. Remove batteries from the unit if it will not be used for a long  period of time.
  8. Exhausted batteries should be removed from the battery compartment to prevent over-discharging, which can cause leakage and may cause damage to the clock.

Battery installation
Insert 1xAA (1.5V) battery observing the correct polarity, as shown on the diagram.

Radio controlled operation DCF version (Germany & European countries)
This Braun clock is set and controlled automatically by DCF radio signal. The DCF radio time code signal is broadcast from Frankfurt, Germany. The coverage of the DCF signal is the whole of Germany. The time code signal can be received up to 1500km from Frankfurt. This covers most of Central and Western Europe.

Radio controlled clock operation

  1. We strongly recommend you start your clock at night. Once the battery is installed properly, the clock automatically sets itself to 12 o’clock and then begins receiving the signal. Once it has received the DCF signal and processed it accordingly (which takes 3 to maximum 12 minutes), the clock will automatically display the correct time.
  2. If the clock still has not set itself after 12 minutes, reception is faulty or not possible at the chosen location. Repeat setting at a different location by pressing the RESET button.

The radio-controlled clock attempts to receive the radio signal up to four times each day at 03:00, 04:00, 05:00 and 06:00. During signal reception, the second hand stops at the 12 o’clock position. It will take 3-12 minutes to receive the radio signal.

Note: If the clock has not received a time signal for 24 hours, at 3:00 all hands will move to the 12 o’clock position and the clock will try to receive the signal. It will take 3-12 minutes to receive the radio signal. Afterwards, the hands will move to the correct time or return to 03:12 if reception was not possible. In this case we recommend to reset the clock as described in this manual.

Important
For best reception performance, please read the following instructions.

  1. Place the unit away from interfering sources such as TV sets, computers, microwaves, etc.
  2. Avoid placing the unit on or next to metal surfaces.
  3. Avoid closed areas such as airports, basements, cement office buildings or factories.

Note: Exposure to an electrostatic environment may cause the clock to reset. In this event please follow the instructions as described in this manual to set the clock again.
Manual time setting

  1. Press and hold the TIME SET button for 3 – 4 seconds to enter the time setting.
  2. Press the TIME SET button for 1 second to advance 1 minute, or
  3. Press and hold the TIME SET button for more than 2 seconds to speed up the time setting to the desired time. During manual time setting, the second hand moves and stops at the 12 o’clock position.
  4. If the TIME SET button is not pressed for 8 seconds, the clock is set.

Important: Once the desired time is set manually, the clock will correct itself to a Radio Controlled time once a valid signal is received.

Reset function
The clock has a hands setting help function. By pressing the reset button at any time, the hands will automatically move to the 12 o’clock position and then receive signal.

Guarantee

2 year guarantee against material and workmanship defects (except battery). The guarantee is valid in those countries where the clock is officially being sold.
Broken or cracked lens screens are not covered under the Guarantee.

Braun helpline
Should you have a problem with your product, please check your local service centre at: www.braun-clocks.com
www.braun-watches.com
or contact +44 808 175 3235 (calls free within the UK)
or +44 208 208 1833.

WARNING! This product is covered by the Waste Electrical and Electronic Equipment (WEEE) directive. It should not be discarded with normal household waste but taken to your local collection centre for recycling.

EU Declaration of Conformity

We ZEON LIMITED UK, manufacturer of Braun Watches & Clocks under licence from the Procter & Gamble Company hereby declare that model BC26-DCF conforms to Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be viewed on our website at www.braun-clocks.com
Frequency band : 77.5KHz
Transmit power : 0 dBm
Certain trademarks used under license from The Procter & Gamble Company or its affiliates.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals