COTEK SR-1600 Plus Rack Mount Pure Sine Wave Inverter User Guide
- June 17, 2024
- COTEK
Table of Contents
SR-1600 Plus Rack Mount
Pure Sine Wave Inverter
User Guide
SR-1600 Plus Rack Mount Pure Sine Wave Inverter
Quick Product Introduction
SR-1600 PLUS
Rack Mount Pure Sine Wave
Inverterhttp://www.cotek.com.tw/support_dataSheet.php?FileLevel=JCU0IyE=
Scan QR Code to view the User Manual
IMPORTANT: Please must read the Installation and Maintenance Instructions Before Connecting to the Supply. Please download and read the user manual from COTEK website or QR code before starting to use the SR Inverter.
AC Output| SR-1600-124 PLUS| SR-1600-148 PLUS| SR-1600-224 PLUS| SR-1600-248
PLUS
---|---|---|---|---
Rating Power| 1200W / 1600VA| 1600W / 1600VA| 1200W / 1600VA| 1600W / 1600VA
Overload Capacity| 105%~150% rated power (15 seconds)| |
Nominal Voltage (AC)| 120VAC| | 230VAC|
Output Voltage Range (AC)| 100~120VAC ± 3%| | 200~240VAC ± 2%|
Efficiency AC Mode| 94%| | 95%|
Efficiency DC Mode| 89%| 90%| 90%| 91%
Frequency Range| 50 / 60 Hz| | |
AC Input
| Nominal Voltage (AC) | 120VAC | 230VAC |
|---|---|---|
| Voltage Range (Full power rating) | 90~130VAC ± 3% | 180~260VAC ± 2% |
| Compliance range before transfer to DC | Adjustable from 75-132.5Vac |
Adjustable from 150-265Vac
Power Factor| > 0.99 @Rating Power
Frequency Range| 50 / 60 Hz|
Synchronization Range| 47~53 Hz, 57~63 Hz|
DC Input
| Nominal Voltage (DC) | 24VDC | 48VDC | 24VDC | 48VDC |
|---|---|---|---|---|
| Voltage Range (DC) | 18~34VDC ± 3% | 36~68VDC ± 3% | 18~34VDC ± 3% | 36~68VDC ± 3% |
| Nominal Current (at 24Vdc/48Vdc) | 56A | 37A | 56A | 37A |
| Max. Input Current (15 Sec.) | 90A | 60A | 90A | 60A |
Environment
| Operating Temp. Without Derating | -25°C ~ 40°C |
|---|---|
| Storage Temp. | -40°C ~ 70°C |
| Working Humidity | 95% RH non-condensing |
| Vibration | BS EN 61373 for Railway application |
Safety & EMC
| Safety Standards | Meet UL 62368-1 | EN62368-1 |
|---|---|---|
| EMC Standards | FCC class B | EN 55032: 2015+A11:2020 |
EN 55035: 2017 / A11: 2020
Other
| Dimension (WxHxD) – Module | 105x83x410 mm / 4.13×3.27×16.14 inch |
|---|---|
| Dimension (WxHxD) – Shelf | 446x85x509 mm / 17.56×3.35×20.04 inch |
| Packing | Module ：3.8kg; 4pcs / 17.2kg; Shelf ：6.5kg; 1pc / 7.5kg |
Suggested SR-1600 Product List
Product Appearance
1. LED indicator
2. Inverter handle
3. Jumper B (terminal resistor)
4. AC input terminal| 5. Parallel connection port CN2
6. Parallel connection port CN1
7. AC output terminal (load)
8. Jumper A (terminal resistor)| 9. CN3 Dry contact and remote
10. RS-485
11. DC input (Battery)
12. Chassis ground
---|---|---
Product Installation
Warranty
Warning!
Do not open or disassemble the Inverter. Attempting to do so may cause risk of
electrical shock or fire.
We guarantee this product against defects in materials and workmanship for a
period of 24 months from the date of purchase.
In case you need to repair or replace any defective power inverters, please
contact COTEK local distributor.
This warranty will be considered void if the unit has been misused, altered,
or accidentally damaged. COTEK is not liable for anything that occurs as a
result of the user’s fault.
www.cotek.com.tw
No.33, Sec. 2, Renhe Rd., Daxi Dist.,
Taoyuan City 33548, Taiwan
Phone ：+886-3-3891999
FAX ：+886-3-3802333
Documents / Resources
|
COTEK SR-1600 Plus Rack Mount Pure Sine Wave
Inverter
[pdf] User Guide
SR-1600 Plus Rack Mount Pure Sine Wave Inverter, SR-1600, Plus Rack Mount Pure
Sine Wave Inverter, Mount Pure Sine Wave Inverter, Pure Sine Wave Inverter,
Sine Wave Inverter, Wave Inverter
---|---