MINELAB SDC 2300 Metal Detectors User Guide
- June 12, 2024
- MINELAB
Table of Contents
MINELAB SDC 2300 Metal Detectors
Product Information
The product is a detector used for identifying and locating metal objects. It is designed for various applications such as treasure hunting, archaeological research, and security purposes. The detector is manufactured by Minelab, a reputable company known for producing high-quality metal detecting equipment.
Product Usage Instructions
- Unpack the detector by removing it from its packaging.
- Insert batteries into the detector.
- Turn on the detector by following the provided instructions.
- Adjust the settings according to your preferences or the specific detection task.
- To ensure accurate detection, keep metal objects away from the coil of the detector.
- Sweep the detector slowly and in overlapping motions.
- Maintain a recommended distance of 15 meters (45 feet) from other detectors or electronic devices to avoid interference.
- If a target is detected, use appropriate tools to dig and uncover the object.
For further information and support, please visit the official website of Minelab at www.minelab.com.
Read the instruction manual for more detailed information.
Unpack
Insert Batteries
Connect Headphones
Pack Up
Setup
- Set default Sensitivity
- Turn On
- Noise Cancel
- Set Threshold
- Ground Balance
- Start Detecting
Detecting Basics
Sweep level
Sweep slowly
Overlap sweep
Keep metal away
Refill hole
OPERATING FREQUENCY: The detector is configured to operate at a primary operating frequency of 9.3 kHz.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>