tzumi AQUABOOST Double Play 2 In 1 Wireless Bluetooth Speaker User Guide
- June 12, 2024
- Tzumi
Table of Contents
tzumi AQUABOOST Double Play 2 In 1 Wireless Bluetooth Speaker User Guide
INTRODUCTION
The AquaBoost Double Play Bluetooth Speakers bring double the bass and double the fun wherever you arel These powerful Bluetooth speakers can be combined into one speaker, and let you listen to your favorite tunes anywhere, whether you’re at the beach or an indoor party. Lightweight, portable, and compact, they e perfect for almost any occasion. Additional features include Bluetooth functionality, an AUX port, and a TF card slot.
‘WHAT’S INCLUDED
- 2x Wireless Bluetooth Speakers
- 2xUSB-C Cables
- User Guide
DIAGRAM & INSTRUCTIONS
-
Power Button
- Press and hold to turn the speaker ON/OFF
- Press to play/pause the music
-
Volume Up
- Press for Volume Up
- Press and hold for Next Song
-
Volume Down
- Press for Volume Down
- Press and hold for Previous Song
-
USB-C Charging Port
-
AUX Port
-
TF Card Slot
BLUETOOTH CONNECTION
- Press and hold the Power Button for 3 seconds to turn the speakers ON.
- Activate Bluetooth on your device and search for available devices.
- Select “Tzumi Double Play” from your device’s Bluetooth list and follow the prompts to finish the pairing process.
- After successfully pairing, a tone will alert that your device has been paired.
NOTE: After successfully pairing, the devices will remember each other, so no pairing will be needed next time.
USING THE SPEAKERS
- Press the power button to play/pause the music.
- Press the “+” or “-” button to increase or decrease the speaker’s volume.
- Press and hold the “+” button to go to the next song/track, or the “-” button to go back to the previous song/track.
TWS Mode: The speakers will pair to each other automatically once you turn them both on at the same time.
CHARGING THE SPEAKERS
- Insert the USB-C end of the included charging cable into the USB-C Port, and the other end into a USB power source.
- The indicator light will turn ON while the speakers are charging, and turn OFF once they are fully charged.
- Disconnect the cables from the speakers and power source once charging is complete.
NOTE: The speakers can only be charged separately.
SAFETY INSTRUCTIONS
- Do not expose the speakers to extremely high or low temperatures, as they may damage the battery.
- Do not drop or put heavy objects on top of the speakers, or apply excessive force to the controls.
- Do not attempt to repair, disassemble, or modify the product. There are no user-serviceable parts inside this device.
- Young children should be supervised to ensure that they do not play with the product.
- If you do not plan to use the product for long periods of time, store it in a dry place, free from extreme temperatures, humidity, and dust.
SPECIFICATIONS
- Input: SV/1A • Power: SW (x2)
- Battery: 1200mAh (x2)
- Charging Time: 2 hours
- Playback Time: Up to 6 hours
- Waterproof Level: IPXS
- Size: 3.21x 3.21 x 787 in.
- Weight: 1.66 lbs.
CUSTOMER SERVICE
If you have any other questions or issues with product use or care, please contact tzumi Technical Support at: 1-135S-GO-TZUMI or support@tzumi.com.
tzumie AquaBoost Double Play. Distributed by tzumi Inc. NY, NY, 10016. ©Copyright 2023 tzumi Inc. All Rights Reserved. Made in China. All other trademarks and trade names are the property of their respective owners. All pictures shown are for illustration purposes only. Actual product may vary due to product enhancement. Subject to change without prior notice.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’ s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -
Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>