ELITE SCREENS Yard Master Wireless Series Backyard Movie Projector Screen User Guide
- June 12, 2024
- ELITE SCREENS
Table of Contents
ELITE SCREENS Yard Master Wireless Series Backyard Movie Projector Screen
Product Information:
The Yard Master Wireless Series is a battery-operated outdoor projector screen
designed for wall and patio installations. It is built with a heavy-duty steel
white finish case that complements outdoor spaces such as backyards, patios,
and pool decks. This screen brings media room quality to your outdoor
gatherings, allowing you to enjoy evening movie time in the comfort of your
own outdoor space.
Important Note: The Yard Master Wireless has a retractable design that allows the screen material to be drawn up into its protective casing, shielding it from direct sunlight. Prolonged exposure to the sun’s ultraviolet radiation can degrade the material and affect its reflective qualities.
Product Usage Instructions
Please follow these instructions to ensure correct usage and maintenance of your Yard Master Wireless projection screen:
- Never leave the projection screen exposed to direct sunlight for extended periods. To protect the screen from solar radiation, always retract it into its protective casing when not in use.
- Avoid touching the projection surface with your hands, as this can cause dust, dirt, and scratches that will affect picture quality.
- Do not write or draw on the projection surface.
- Avoid using fingers or sharp objects to point at the projection surface, as this can damage the screen material.
- To clean the projection surface, use a soft-damp cloth with clean water. Do not apply cleaning agents or alcohol. Gently wipe the surface without rubbing against the material.
- Ensure that only adults operate the screen to avoid damage and injury.
For any further questions or concerns, please contact Customer Service. Remember that individual modifications to the product are prohibited and will void the warranty with the manufacturer.
Note: This product complies with the limits for a Class B digital device, according to Part 15 of the FCC Rules. However,there is no guarantee that it will not cause interference in all installations. If the equipment causes harmful interference to radio or television reception, try reorienting or relocating the receiving antenna, increasing the separation between the screen and the device’s receiver, or connecting the equipment to a different power outlet.
Yard Master Wireless Series
Battery-Operated Outdoor Projector Screen
User’s Guide V1
For latest version visit www.elitescreens.com
Thank you for choosing the Yard Master Wireless projection screen! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.
Product Description
The Yard Master Wireless is a battery-operated outdoor screen for wall and
patio installations that brings media room quality to your outdoor spaces. Its
heavy-duty steel white finish case beautifully accessorizes your backyard,
patio, pool deck or anywhere a gathering for evening movie time is
appropriate.
Outdoor Projection Screen Disclaimer
Never leave your projection screen out and exposed to direct sunlight.
prolonged exposure to the sun’s ultraviolet radiation degrades the chemical
bonds causing the material to eventually decompose. grade reflective
qualities. Eventually nature will destroy even synthetic materials. For this
reason, the Yard Master Wireless has a retractable design that allows the
material to be drawn up into its protective casing to be shielded from solar
radiation.
Care & Use Instructions
Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the points below to prevent that from occurring:
- Do not touch the projection surface with your hands
- Do not write or draw on the projection surface
- Do not use fingers or sharp objects to point on the projection surface; this will damage the screen material.
- Use a soft-damp cloth to clean t agents or alcohol.
- Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.
To avoid damage and injury, the screen should only be operated by adults.
Important Safety & Warning Precautions
Make sure to read this user’s guide and follow the procedures below.
- Please retain this user’s guide for future reference.
- Handle the unit carefully during transportation to avoid any damages.
- Do not install the unit on uneven or inclined surfaces.
- There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself. No one except authorized technicians can open and make repairs to this unit.
- Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.
- Avoid direct sunshine on the projection screen material.
- Keep away from fire sources and high temperature to prevent this device from overheating.
- To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious damage or if there are any evident broken parts.
Understandg the Ingress Protection Rating IPX3
WARNING
The Screen’s Top Black Drop is already set to its maximum drop distance. There
is NO extra top black drop in the roller. Please be aware of this as it will
void the warranty.
Individual modifications to this product are prohibited and will void the
warranty with the manufacturer. Please contact Customer Service for any
questions.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur on an
installation. If this equipment causes harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures.
- Reorient or relocate the receiving antenna of the device which may be causing the interference.
- Increase the separation between the screen and the device’s receiver.
- Connect the equipment into a different power outlet other than the device.
Pre-Installation
- Carefully unpack the screen.
- Always handle the screen in a leveled position on a clean surface.
- In order to protect the screen from exposure to stains, keep the screen out of contact with foreign particles such as dust, sawdust, and/or liquids.
NOTE: Wall screws included with this product are complimentary and may
not be adequate for all mounting surfaces. Consult with a professional
installer or hardware store for proper mounting screws and anchors.
Regardless of the mounting method, the screen should be securely supported so
that the vibration or pulling on the viewing surface will not cause the casing
to become loose or fall. The installer must ensure that the fasteners used are
of adequate strength and suitable for the installation location.
INSTALLATION INSTRUCTIONS
Install the screen in a location where the audience can see the entire
screen’s viewable area when it is fully extended.
For installation assistance, please consult a professional Installer. Elite
Screens® is not liable for faulty installations. Two or more people are
required to hang the screen. A. Wall Mount (Unscrew and remove D-rings if
necessary)
- Measure and mark the distance of the keyholes on each end of the end cap bracket.
- After marking the area, drill a hole and insert a screw on each side.
- Hang the screen and check the screen is level.
- Install a screw on the bottom end cap bracket to finish installation.
Ceiling Mount
- Remove the D-rings on each side of the end cap bracket.
- Measure the distance between the ceiling mount points where the D-rings were installed.
- After marking the area, drill a hole and insert two screws on each side to mount the screen.
Suspended
- Measure the distance between the D-rings on each end.
- Drill holes and install screw hooks (not included).
- Hang the screen from the D-rings
Screen Operation
Electrical Specifications
Voltage: 100-120V, 60 Hz| Consumption: 36 W
Integrated Battery: DC 14.8 V, 3000 mAh| Power Supply: DC 16.8V, 3A
Charging the battery
Fully charge the battery before operating the screen. Plug the charging cable
to the charging port on the screen and the power cable to an electrical
outlet. Once the battery has been fully charged, the LED indicator light will
turn green and is ready for use.
Screen Control
The screen can be controlled using the Radio Frequency (RF) remote control or
the manual control buttons on the left side of the screen.
For more information, technical support or your local Elite Screens® contact, please visit www.elitescreens.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>