D-Link DGS-F1010P-E 8GE PoE Plus 2GE Uplink 120Watt PoE Switch Owner’s Manual
- June 12, 2024
- D-Link
Table of Contents
Building Networks for People
DGS-F1010P-E
8GE PoE+ 2GE Uplink, 120Watt PoE switch
Product Highlights
- Support power over Ethernet cable device for example wireless AP and IP camera
- Support IEEE802.3af/at standard
- Transmission distance 250m, it can be flexible installation for wireless AP and surveillance project.
- It will give the speed of 10Mbps at 250meter when connect IP cameras
Features
- Support upward port auto MDI/MDIX.
- Adopted storage forward switch system
- Smart power and minimum consumption, guarantee PD requirement
- With power supply circuit protection function and protection back-end device safety
- Automatically provide the adaptive device
- Fanless design, energy saving and environmental protection;
- 8 10/100/1000Mbps POE port
- 2 10/100/1000Mbps uplink port
- Support saving power function when port connection
Overview
DGS-F1010P-E is 10 port 1Gps with 8 PoE port switch that offers 8 10/100/1000 Mbps PoE ports, 2 10/100/1000Mbps uplink ports, auto detection and identification IEEE802.3af/at standard PD device, then carry power to it. Therefore, do not worry it will destroy the private standard PoE or Non- PoE equipment. DGS-F1010P-E is the best choice for mini type commercial network because it economically uses PoE deployment wireless AP and IP camera. It can resolve the problem of maintenance tedious, wireless coverage, terminal device powered, surveillance project. Maximum save the cost.
Technical Specifications
Network Interface| 8 10/100/1000Mbps PoE R145 port (port 1 -port 8)
2 10/100/1000Mbps uplink R145 port (port 9-port 10)
---|---
Transmission Rate| 10/100/1000Mbps Each port supports MDI / MDIX auto-flip and
auto-
· Network interface:10BASE-T or 100BASE-TX Ethernet RJ-45 port
Protocols and Standards| · IEEE802.3i 10BASE-T
· IEEE 802.3u 100BASE-TX
· IEEE 802.3ab 1000BASE-T
· ANSI/IEEE 802.3 NWay auto-negotiation
· IEEE802.3x Flow Control
·IEEE 802.3af/at standard
Performance| · Bandwidth: 20 Gbps (no block)
· Network delay (100 to 100M bps): maximum 20 μs (using 64byte packet)
· Frame filtering and transmission rate
· 10M: 14,800pps
· 100M: 148,800pps
· 1000M: 1488,00pps
LEDs Indicator| Power
· LINK/ACT，POE
POE Pin| · 1/2(+) 3/6(-);
Power| · Total Power: 120W
Lightning pro;L:ctic.r1| 6KV
Physical specifications| Dimensions (LxWxH): 184 x 94 x 27mm
Weight 1.05kg
Environmental norms| Operating Temperature: 0°C-40°C Storage Temperature:
-10°C-70°C
Operating Humidity: 10%-90% non-condensing Storage Humidity: 5%-90% non-
condensing
EMC| · CE Class B
· FCC Part 15，Class B
· VCCI Class B
· C-Tick
Switch Working mode
Using DIP switch control working mode, details description as below:
- VLAN: Isolating ports each other, restrain network storms effectively and improve network performance
- EXTEND: Supports 250meters long distance power supply (recommended cat 5 or above)
- PoE: Automatic detection power of port, power off and restart the device if find PD device crash
- QoS: Customize application prioritization and increase network sensitivity. For example, video priority, monitoring transmission more smoothly
Ordering Information
| Part Code | Description |
|---|---|
| DGS-F1010P-E | 8×10/100/1000 Mbps PoE Ports and 2 10/100/1000 Mbps Uplink port |
Unmanaged Switch
Specifications are subject to change without notice. D-Link is a registered
trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners.
©2019 D-Link Corporation. All rights reserved. E&OE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>