Pro-Ject Audio A2 Automatic Turntable User Guide

: June 12, 2024
: Pro-Ject Audio

Table of Contents

Pro-Ject Audio A2 Automatic Turntable
Product Information
Product Usage Instructions
WHAT’S IN THE BOX
HOW TO USE
Service
Warranty
Documents / Resources

Pro-Ject Audio A2 Automatic Turntable

Product Information

Product Name: A2
Origin: Made in Germany
Manufacturer: Pro-Ject Audio Systems
Trademark: H. Lichtenegger
Model Number: SG026
This turntable is intended for domestic use only and is not suitable for commercial environments or on commercial scales. Any faults caused by using it in such settings are not covered by warranty.
The manufacturer accepts no responsibility for damage caused by not adhering to the instructions for use and/or by transportation without the original packaging. Modification or change to any part of the product by unauthorized persons releases the manufacturer from any liability beyond the lawful rights of the customer.
The manufacturer reserves the right to make changes to the technical specifications without prior notice as deemed necessary for ongoing technical development.
If you need assistance or have any questions, feel free to contact us. We have experienced partners worldwide, and you can find your nearest dealer on our website: www.project-audio.com/en/find-a-dealer/

Product Usage Instructions

Unpack all items from the packaging carton:
- a) Turntable
- b) Felt Mat
- c) Connect it E cable
- d) Counterweight
- e) Drive belt
- f) Power Supply
- g) Platter
- h) Single Adapter
Remove the dust cover.
Remove the red transport spacers.
Remove the protective insert.
Put the belt over the pulley & sub-platter.
Put the platter on the turntable.
Secure the platter with the fastening clip.
Put the felt mat on the platter.
Put the counterweight on the tonearm and remove the cartridge cap.
Balance the tonearm by turning the counterweight on the rod until it is leveled.
Set the anti-skating scale to 1.7 (or 2 for the Sumiko Rainier cartridge).
Set the counterweight scale to 1.7 (or 2 for the Sumiko Rainier cartridge).
Connect the turntable to your stereo system using the Connect it is E RCA cable.
Select the desired playback speed.
Set tonearm lift, record size, and start playing.
Enjoy your music!

Product Components

a) Turntable: The main component of the product.
b) Felt Mat: Used to provide cushioning and reduce vibrations during playback.
c) Connect it E cable: RCA cable is used to connect the turntable to a stereo system.
d) Counterweight: Used to balance the tonearm for optimal tracking force.
e) Drive belt: Connects the motor to the sub-platter for rotation.
f) Power Supply: Provides power to the turntable.
g) Platter: Holds the vinyl record during playback.
h) Single Adapter: Used for playing 7-inch vinyl records.

A2 Setup Guide

Getting started:

Make sure to have enough space to unpack your turntable.
Always unpack and set up in a clean environment.
Please Do NOT throw away the packaging! If you need service or want to return your product, please send it in the original packaging including all inserts. In case of damage due to alternative packaging your dealer cannot guarantee a full refund.
Full manual: www.project-audio.com/en/product/a2

WHAT’S IN THE BOX

Unpack all items from the packaging carton

a ) Turntable
b ) Felt Mat
c ) Connect it E cable
d ) Counterweight
e ) Drive belt
f ) Power Supply
g ) Platter
h ) Single Adapter

HOW TO USE

Remove the dust cover.
Remove the protective insert.
Remove the red transport spacers.
Put the belt over the pully & sub-platter.
Put the platter on the turntable
Secure the platter with the fastening clip.
Put the felt mat on the platter.
Put counterweight on the tonearm.
Remove the cartridge cap.
- (Attention! Depending on your location there might be a different cartridge mounted.)
Balance the tonearm by turning the counterweight on the rod until it is leveled.
Set the anti-skating scale to 1.7.
- (For Sumiko Rainier: set anti-skating to 2)
Set the counterweight scale to 1.7.
- (For Sumiko Rainier: set scale to 2)
Connect to your stereo system.
Select the playback speed.
Set tonearm lift, record size, and start.
Have fun with the music!

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country.
Warranty repairs will only be affected if the unit is returned correctly packaged. For this reason we recommend keeping the original packaging.
Never return a record player without making sure that is it safely disassembled and correctly packaged in the original packaging according to the diagrams on the last page of this user guide. Please remove these parts and pack them separately: lid, counterweight, anti-skating weight and belt.
Fit the cartridge protection cap and the transport lock for the tonearm tube, prior to carefully packaging the record player.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the original packaging. Modification or change to any part of the product by unauthorized persons, release the manufacturer from any liability over and above the lawful rights of the customer.

Warranty: Terms and Conditions

A warranty is valid only for products purchased from an authorized Pro-Ject Audio Systems retailer or dealer.
This warranty offer is limited to the repair of the equipment (which could be a repair or replacement at our discretion, neither of which affects your original warranty).
Neither transportation or any other costs, nor any risk for removal, transportation and installation of products is covered by this warranty.
A warranty is only valid for the original owner. It is not transferable.
To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase.
Warranty must be claimed within two years of purchase from an authorized dealer. After this period of time, the warranty will expire.
The legal warranty obligation exists in addition to this warranty and is not limited by this warranty
A Pro-Ject Audio Systems warranty relates to claims of defects in materials and/or workmanship at the time of purchase. It does not cover:
Deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads, drive belts and cartridges.
Damages caused by incorrect installation, connection or packing.
Damages caused by any use other than the correct use described in the user manual, negligence, modifications, or use of parts that are not made or authorized by Pro-Ject Audio Systems.
Damages caused by faulty or unsuitable ancillary equipment.
Damages caused by accidents, lightning, water, fire heat, war, public disturbances or any other cause beyond the reasonable control of Pro-Ject Audio Systems and its appointed distributors.
Products where the serial number has been altered, deleted, removed or made illegible.
Repairs or modifications that have been executed by an unauthorized person.

Commercial Use

Faults caused due to using domestic products in commercial environments or on commercial scales are not covered by warranty. This turntable is intended for domestic use only. Using them for business applications are done so at your own risk.
Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems Copyright © 2023. All rights reserved.
The information, pictures and figures were correct at the time of going to press. The manufacturer reserves the right to make changes to the technical specification without prior notice as deemed necessary to uphold the ongoing process of technical development.

Need help?